Features ■ Expands to add POTS lines, DSL or both ■ Convenient ground attachment ■ Manufactured from high-impact ■ Listed per UL 497 (File: E53117) resistant,ultraviolet-desensitized, flame retardant plastic ■ Optional sealed switching jacks with Insulation DIsplacement Connectors(IDC) ■ Subscriber lockable with Telco override 7090 Series - Network Interface Device Bourns® 7090 NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installations. The 7090 supplies station protection and test access points and can be configured for a maximum of six POTS lines or three lines with DSL. The 7090 features plenty of working space for wire management. How To Order 7090 - 0X - X X - XX - XX Model Number Designator Number of Twisted Pairs 1 = One 3 = Three 2 = Two 4 = Four 5 = Five 6 = Six Station Protector Options D1 U3 Z1 W3 V3 Q3 = 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL, cUL) = 455HS-MSP (2377-45-HS-IDC) Voice/DSL/Data (UL, cUL) = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL) = 455HS-BC* (2377-45-BC-IDC) Balance-Sensitive DSL (UL, cUL) = 455-MSP-TBU (2377-45-HS-TBU) MSP w/TBU® Protector (UL, cUL) = 455BC-MSP-TBU* (2377-45-BC-TBU) Balance-Sensitive MSP w/TBU® Protector (UL, cUL) E2 = 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL) Y2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL) G = 155G (2378-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL) K = 356G (2377-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL) R3 = 356G (2377-35-G-IDC) Balanced GDT, No Back-Up-Gap (UL, cUL) T = Tii355M O = No Station Protectors (Not available with DSL configurations) *For DSL systems requiring capacitive balance within 1 pF. Note 1 = Digi.Guard - 356 size, RUS Maximum Duty. Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty. Note 3 = Insulation Displacement Connectors (IDC) Special Options G = Security Screw in Telco Cover H = Security Screw in security plate S = Sealed Switching Jack w/IDC (85122-T-IDC) F = Sealed Switching Jack 4-Post (85122-T4) POTS Splitter Options† P1 = (1) 3610A2 ADSL 2+ POTS Splitter, UL Listed P2 = (2) 3610A2 ADSL 2+ POTS Splitters, UL Listed P3 = (3) 3610A2 ADSL 2+ POTS Splitters, UL Listed V1 = (1) 3610V2 VDSL 2 POTS Splitter, UL Listed V2 = (2) 3610V2 VDSL 2 POTS Splitters, UL Listed V3 = (3) 3610V2 VDSL 2 POTS Splitters, UL Listed B = I = O = Expansion Bridge w/Binding Posts (85122-B) Expansion Bridge w/IDC (85122-IDC) No options (standard 85122 jack) P1-I = (1) 3610A2-IDC ADSL2+ POTS Splitter w/IDC, UL Listed P2-I = (2) 3610A2-IDC ADSL2+ POTS Splitters w/IDC, UL Listed P3-I = (3) 3610A2-IDC ADSL2+ POTS Splitters w/IDC, UL Listed V1-I = (1) 3610V2-IDC VDSL2 POTS Splitter w/IDC, UL Listed V2-I = (2) 3610V2-IDC VDSL2 POTS Splitters w/IDC, UL Listed V3-I = (3) 3610V2-IDC VDSL2 POTS Splitters w/IDC, UL Listed W1-I = (1) 3622V2-IDC VDSL2 POTS Splitter w/IDC, Subscriber Side, RJ11, UL Listed W2-I = (2) 3622V2-IDC VDSL2 POTS Splitters w/IDC, Subscriber Side, RJ11, UL Listed W3-I = (3) 3622V2-IDC VDSL2 POTS Splitters w/IDC, Subscriber Side, RJ11, UL Listed †DSL Configuration Note: 7090 NIDs ordered with POTS splitter units must be ordered with Special Option F (4-post sealed switching jacks) or Special Option S (sealed switching jack w/IDC). Example: 7090-01-EF-P1 DSL Adapter Options B1 = (1) 3670-01 BalUn Module B2 = (2) 3670-01 BalUn Modules To add lines, use station protector + 85122 Standard Jack (Not available with DSL configurations) 85122-T4 Sealed Switching Jack, 4-post 85122-T-IDC Sealed Switching Jack w/IDC Also available: 80535 Conduit Adapter Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 7090 Series - Network Interface Device POTS Splitter Installation MOUNTING POST STATION PROTECTOR POTS SPLITTER (ON TOP) 85122-T4 POTS MODULE PROTECTOR (ON BOTTOM) GROUND TERMINAL MOUNTING POST PROTECTOR DATA IN1/2 OUT POTS SPLITTER 85122-T (SUPPLIED) DATA MODULE MOUNTING POST FINISHED BEFORE COMMON POST ATTACHMENT (7090 / 7091) CUSTOMER SIDE LOCKED TELCO SIDE FROM C.O. Product Dimensions CAT 5 TO PHONE High Wide Deep 229 (9.0) 216 (8.5) 69 (2.7) TO DSL MODEM DIMENSIONS: RJ11 Subscriber Bridges 85122 Standard Loop MM (INCHES) Expansion Bridges 85122-T4* Internal Switch - 4 Lugs 85122-IDC Insulation Displacement Connectors TR TR 1 2 TR TR 3 4 85122-B Binding Post 85122-T-IDC* Sealed Switch Jack w/IDC *Includes environmental sealant and closed-cell foam gasket. REV. M 04/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.