7004C

Features
■ Accepts POTS lines & coaxial protector
■ Subscriber lockable with Telco override
■ Manufactured from high-impact resistant,
■ Convenient ground attachment
ultraviolet-desensitized, flame retardant
plastic
■ Optional sealed switching jacks with
Insulation Displacement Connectors
(IDC)
■
Listed per UL 497 (File: E53117)
7004C Series - Network Interface Device
Bourns® Model 7004C NID provides a secure and weather resistant enclosure for Telco service for residential or commercial
installations. The 7004C supplies station protection and test access points and can be configured for a maximum of two POTS lines
and one 1740-xx coax protector. The 7004C features convenient cable knockouts and generous working space for wire
management.
How To Order
7004C - 0X - X X - XX
Model Number Designator
Number of Twisted Pairs
0 = None
1 = One
2 = Two
Station Protector Options
D 1 = 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL)
U 3 = 455HS-MSP (2377-45-HS-IDC) Voice/DSL/Data (UL,cUL)
Z 1 = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL)
W 3 = 455HS-BC* (2377-45-BC-IDC) Balance-Sensitive DSL (UL, cUL)
V 3 = 455-MSP-TBU (2377-45-HS-TBU) MSP w/TBU® Protector (UL, cUL)
Q 3 = 455BC-MSP-TBU* (2377-45-BC-TBU) Balance-Sensitive MSP w/TBU® Protector (UL, cUL)
E 2 = 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL)
Y 2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL)
G = 155G (2378-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL)
K = 356G (2377-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL)
R 3 = 356G (2377-35-G-IDC) Balanced GDT, No Back-Up-Gap (UL, cUL)
T
O
= Tii355M
= No Station Protectors (Not available with DSL configurations)
*For DSL systems requiring capacitive balance within 1 pF.
Note 1 = Digi.Guard - 356 size, RUS Maximum Duty.
Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty.
Note 3 = Insulation Displacement Connectors (IDC)
Special Options
H = Security Screw in security plate
S = Sealed Switching Jack w/IDC (85122-T-IDC)
F = Sealed Switching Jack 4-Post (85122-T4)
B = Expansion Bridge w/Binding Posts (85122-B)
I =
O =
N=
Expansion Bridge w/IDC (85122-IDC)
No options (standard 85122 jack)
90 ° F-connector (85901)
Coax Protector Options
15 = 1740-15 (150 V±20 % DC Breakdown @ 100 V/Sec)
23 = 1740-23 (230 V±20 % DC Breakdown @ 100 V/Sec)
35 = 1740-35 (350 V±20 % DC Breakdown @ 100 V/Sec)
To add lines, use station protector +
85122
Standard Jack
85122-T4
Sealed Switching Jack, 4-post
85122-T-IDC
Sealed Switching Jack w/IDC
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
7004C Series - Network Interface Device
Installation Diagrams
TO GROUND
Product Dimensions
High
Wide
Deep
190.5
(7.5)
195.6
(7.7)
69
(2.7)
DIMENSIONS:
MM
(INCHES)
RJ11 Subscriber Bridges
85122
Standard Loop
Expansion Bridges
85122-T4*
Internal Switch - 4 Lugs
85122-IDC
Insulation Displacement
Connectors
TR
TR
1
2
TR
TR
3
4
85122-B
Binding Post
85122-IDC*
Sealed Switch Jack w/IDC
*Includes environmental sealant and closed-cell foam gasket.
REV. F 04/15
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.