CO LO & MP LI GE AN N T FR EE Features Applications ■ Radial Leaded Devices Almost anywhere there is a low voltage power supply and a load to be protected, including: ■ Computers & peripherals ■ General electronics ■ Automotive applications *R oH S ■ Cured, flame retardant epoxy polymer ** HA insulating material meets UL 94V-0 requirements ■ RoHS compliant* and halogen free** ■ Agency recognition: MF-R Series - PTC Resettable Fuses Electrical Characteristics Ihold Model V max. Volts I max. Amps MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 60 60 60 60 60 60 60 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 30 30 16 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 100 Itrip Amperes at 23 °C Hold Trip 0.05 0.10 0.10 0.20 0.17 0.34 0.20 0.40 0.25 0.50 0.30 0.60 0.40 0.80 0.50 1.00 0.65 1.30 0.75 1.50 0.90 1.80 0.90 1.80 1.10 2.20 1.35 2.70 1.60 3.20 1.85 3.70 2.50 5.00 2.50 5.00 3.00 6.00 4.00 8.00 5.00 10.00 6.00 12.00 7.00 14.00 8.00 16.00 9.00 18.00 11.00 22.00 Initial Resistance Ohms at 23 °C Min. Max. 7.3 11.1 2.50 4.50 2.00 3.20 1.50 2.84 1.00 1.95 0.76 1.36 0.52 0.86 0.41 0.77 0.27 0.48 0.18 0.40 0.14 0.31 0.07 0.12 0.10 0.18 0.065 0.115 0.055 0.105 0.040 0.07 0.025 0.048 0.025 0.048 0.020 0.05 0.010 0.03 0.010 0.03 0.005 0.02 0.005 0.02 0.005 0.02 0.005 0.01 0.003 0.01 1 Hour (R1) Max. Time Post-Trip to Trip Resistance Ohms Amperes Seconds at 23 °C at 23 °C at 23 °C Max. 22.0 0.5 5.0 7.50 0.5 4.0 8.00 0.85 3.0 4.40 1.0 2.2 3.00 1.25 2.5 2.10 1.5 3.0 1.29 2.0 3.8 1.17 2.5 4.0 0.72 3.25 5.3 0.60 3.75 6.3 0.47 4.5 7.2 0.22 4.5 5.9 0.27 5.5 6.6 0.17 6.75 7.3 0.15 8.0 8.0 0.11 9.25 8.7 0.07 12.5 10.3 0.07 12.5 10.3 0.08 15.0 10.8 0.05 20.0 12.7 0.05 25.0 14.5 0.04 30.0 16.0 0.03 35.0 17.5 0.03 40.0 18.8 0.02 45.0 ***20.0 0.014 40.0 20.0 Tripped Power Dissipation Watts at 23 °C Typ. 0.22 0.38 0.48 0.40 0.45 0.50 0.55 0.75 0.90 0.90 1.00 0.60 0.70 0.80 0.90 1.00 1.20 1.20 2.00 2.50 3.00 3.50 3.80 4.00 4.20 4.50 ***Tested at 40 amps Environmental Characteristics Operating/Storage Temperature ...................... -40 °C to +85 °C Maximum Device Surface Temperature in Tripped State ............................................ 125 °C Passive Aging .................................................. +85 °C, 1000 hours...........................................±5 % typical resistance change Humidity Aging................................................. +85 °C, 85 % R.H. 1000 hours .........................±5 % typical resistance change Thermal Shock ................................................ -40 °C to +85 °C, 10 times ................................±10 % typical resistance change Solvent Resistance .......................................... MIL-STD-202, Method 215 ...............................No change Vibration .......................................................... MIL-STD-883C, Method 2007.1,.......................No change Condition A Test Procedures And Requirements For Model MF-R Series Test Test Conditions Accept/Reject Criteria Visual/Mech. .................................................... Verify dimensions and materials .......................Per MF physical description Resistance ....................................................... In still air @ 23 °C .............................................Rmin ≤ R ≤ Rmax Time to Trip ...................................................... 5 times Ihold, Vmax, 23 °C ...............................T ≤ max. time to trip (seconds) Hold Current .................................................... 30 min. at Ihold .................................................No trip Trip Cycle Life .................................................. Vmax, Imax, 100 cycles ....................................No arcing or burning Trip Endurance ................................................ Vmax, 48 hours.................................................No arcing or burning UL File Number ................................................ E174545 TÜV File Number ............................................. R2057213 * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns follows the prevailing definition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Additional Features ■ Bulk packaging, tape and reel and Ammo-Pak available on most models MF-R Series - PTC Resettable Fuses Product Dimensions (see next page for outline drawing) Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 A Max. 8.0 (0.315) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.9 (0.311) 9.7 (0.382) 10.4 (0.409) 11.7 (0.461) 7.4 (0.291) 8.9 (0.350) 8.9 (0.350) 10.2 (0.402) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 14.4 (0.567) 17.4 (0.685) 19.3 (0.760) 22.1 (0.870) 24.2 (0.953) 24.2 (0.953) 24.2 (0.953) B Max. 8.3 (0.327) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 13.4 (0.528) 13.7 (0.539) 13.7 (0.539) 15.2 (0.598) 16.0 (0.630) 16.7 (0.657) 12.2 (0.480) 14.0 (0.551) 18.9 (0.744) 16.8 (0.661) 18.4 (0.724) 18.3 (0.720) 18.3 (0.720) 18.3 (0.720) 24.8 (0.976) 24.9 (0.980) 31.9 (1.256) 29.8 (1.173) 32.9 (1.295) 32.9 (1.295) 32.9 (1.295) C Nom. 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) Tol. ± 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) Packaging options: BULK: All models = 500 pcs. per bag D Min. 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) E Max. 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) Physical Characteristics Style 4 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 2 3 2 2 2 2 2 2 2 2 0.405 (26AWG) 0.51 (24AWG) 0.81 (20AWG) Lead Dia. 0.405 (0.016) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.81 (0.032) 0.51 (0.020) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) Material Sn/NiCu Sn/NiCu Sn/CuFe Sn/CuFe Sn/CuFe Sn/CuFe Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu DIMENSIONS: MM (INCHES) TAPE & REEL: MF-R005-MF-R160 12.7 mm device pitch = 3000 pcs. per reel MF-R185-MF-R400 25.4 mm device pitch = 1500 pcs. per reel MF-R500~MF-R1100 25.4 mm device pitch = 1000 pcs. per reel AMMO-PACK: MF-R005-MF-R160 12.7 mm device pitch = 2000 pcs. per pack MF-R185-MF-R400 25.4 mm device pitch = 1000 pcs. per pack MF-R500~MF-R1100 25.4 mm device pitch = 500 pcs. per pack Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. MF-R Series - PTC Resettable Fuses Product Dimensions (see previous page for dimensions) Style 1 Style 2 A E Style 3 A E Style 4 A B B A E E B B D C D D D C C C NOTE: Kinked lead option is available for board standoff. Contact factory for details. NOTE: Also available with straight leads. Contact factory for details. Thermal Derating Chart - Ihold / Itrip (Amps) Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 -40 ºC 0.08 / 0.16 0.16 / 0.32 0.26 / 0.52 0.31 / 0.62 0.39 / 0.78 0.47 / 0.94 0.62 / 1.24 0.78 / 1.56 1.01 / 2.02 1.16 / 2.32 1.40 / 2.80 1.40 / 2.80 1.60 / 3.20 1.96 / 3.92 2.32 / 4.64 2.68 / 5.36 3.63 / 7.26 3.63 / 7.26 4.35 / 8.70 5.80 / 11.6 7.25 / 14.5 8.70 / 17.4 10.1 / 20.3 11.6 / 23.2 13.0 / 26.1 16.1 / 32.0 -20 ºC 0.07 / 0.14 0.14 / 0.28 0.23 / 0.46 0.27 / 0.54 0.34 / 0.68 0.41 / 0.82 0.54 / 1.08 0.68 / 1.36 0.88 / 1.76 1.02 / 2.04 1.22 / 2.44 1.22 / 2.44 1.43 / 2.86 1.76 / 3.52 2.08 / 4.16 2.41 / 4.82 3.25 / 6.50 3.25 / 6.50 3.90 / 7.80 5.20 / 10.4 6.50 / 13.0 7.80 / 15.6 9.10 / 18.2 10.4 / 20.8 11.7 / 23.4 14.6 / 29.2 0 ºC 0.06 / 0.12 0.12 / 0.24 0.20 / 0.40 0.24 / 0.48 0.30 / 0.60 0.36 / 0.72 0.48 / 0.96 0.60 / 1.20 0.77 / 1.54 0.89 / 1.78 1.07 / 2.14 1.07 / 2.14 1.27 / 2.54 1.55 / 3.10 1.84 / 3.68 2.13 / 4.26 2.88 / 5.76 2.88 / 5.76 3.45 / 6.90 4.60 / 9.20 5.75 / 11.5 6.90 / 13.8 8.05 / 16.1 9.20 / 18.4 10.3 / 20.7 13.1 / 26.2 Ambient Operating Temperature 23 ºC 40 ºC 50 ºC 0.05 / 0.10 0.04 / 0.08 0.04 / 0.08 0.10 / 0.20 0.08 / 0.16 0.07 / 0.14 0.17 / 0.34 0.14 / 0.28 0.12 / 0.24 0.20 / 0.40 0.16 / 0.32 0.14 / 0.28 0.25 / 0.50 0.20 / 0.40 0.18 / 0.36 0.30 / 0.60 0.24 / 0.48 0.22 / 0.44 0.40 / 0.80 0.32 / 0.64 0.29 / 0.58 0.50 / 1.00 0.41 / 0.82 0.36 / 0.72 0.65 / 1.30 0.53 / 1.06 0.47 / 0.94 0.75 / 1.50 0.61 / 1.22 0.54 / 1.08 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 1.10 / 2.20 0.91 / 1.82 0.85 / 1.70 1.35 / 2.70 1.12 / 2.24 1.04 / 2.08 1.60 / 3.20 1.33 / 2.66 1.23 / 2.46 1.85 / 3.70 1.54 / 3.08 1.42 / 2.84 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 3.00 / 6.00 2.49 / 4.98 2.31 / 4.62 4.00 / 8.00 3.32 / 6.64 3.08 / 6.16 5.00 / 10.0 4.15 / 8.30 3.85 / 7.70 6.00 / 12.0 4.98 / 9.96 4.62 / 9.24 7.00 / 14.0 5.81 / 11.6 5.39 / 10.7 8.00 / 16.0 6.64 / 13.2 6.16 / 12.3 9.00 / 18.0 7.47 / 14.9 6.93 / 12.7 11.0 / 22.1 9.40 / 18.4 8.80 / 17.6 60 ºC 0.03 / 0.07 0.06 / 0.12 0.11 / 0.22 0.13 / 0.26 0.16 / 0.32 0.19 / 0.38 0.25 / 0.50 0.32 / 0.64 0.41 / 0.82 0.47 / 0.94 0.57 / 1.14 0.57 / 1.14 0.75 / 1.50 0.92 / 1.84 1.09 / 2.18 1.26 / 2.52 1.70 / 3.40 1.70 / 3.40 2.04 / 4.08 2.72 / 5.44 3.40 / 6.80 4.08 / 8.16 4.76 / 9.52 5.44 / 10.8 6.12 / 12.2 7.80 / 15.6 70 ºC 0.03 / 0.07 0.05 / 0.10 0.09 / 0.18 0.11 / 0.22 0.14 / 0.28 0.16 / 0.32 0.22 / 0.44 0.27 / 0.54 0.35 / 0.70 0.41 / 0.82 0.49 / 0.98 0.49 / 0.98 0.67 / 1.34 0.82 / 1.64 0.98 / 1.96 1.13 / 2.26 1.53 / 3.06 1.53 / 3.06 1.83 / 3.66 2.44 / 4.88 3.05 / 6.10 3.66 / 7.32 4.27 / 9.44 4.88 / 9.76 5.49 / 10.9 6.90 / 13.8 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 85 ºC 0.02 / 0.05 0.04 / 0.08 0.07 / 0.14 0.08 / 0.16 0.10 / 0.20 0.12 / 0.24 0.16 / 0.32 0.20 / 0.40 0.26 / 0.52 0.30 / 0.60 0.36 / 0.72 0.36 / 0.72 0.57 / 1.14 0.70 / 1.40 0.83 / 1.66 0.96 / 1.92 1.30 / 2.60 1.30 / 2.60 1.56 / 3.12 2.08 / 4.16 2.60 / 5.20 3.12 / 6.24 3.64 / 7.28 4.16 / 8.32 4.68 / 9.36 5.20 / 10.4 MF-R Series - PTC Resettable Fuses How to Order Typical Time to Trip at 23 ºC MF -R MF 005 -R0 10 MF -R0 MF 1 7 -R MF 020 -R MF 025 -R MF 030 -R MF 040 -R MF 050 -R MF 065 -R MF 075 -R0 90 MF - R 110 - 0 - 99 ® Time to trip (Seconds) 100 10 1 0.1 0.01 0.001 0.1 1 10 100 MF -0--R09 9 0 MF -R MF 110 -R MF 135 -R MF 160 -R MF 185 -R2 250 50, -0 MF -10 -R3 MF 00 -R MF 400 -R MF 500 -R MF 600 -R7 MF 00 -R MF 800 -R MF 900 -R1 100 Fault Current (Amps) Multifuse Product Designator Series R = Radial Leaded Component Hold Current, Ihold 005-1100 (0.05 Amps - 11.0 Amps) Packaging Options - __ = Bulk Packaging without part number suffix option - 0-99 = Bulk Packaging with part number suffix option -2= Tape and Reel without part number suffix option* - 2-99 = Tape and Reel with part number suffix option - AP = Ammo-Pak* - 0-14 = Kinked leads where straight leads are standard - 0-17 = Straight leads where kinked leads are standard Part Number Suffix Option - 99 = As of date code April 1, 2005 all MF-R models are RoHS compliant. The suffix “-99” can be used if a new part number is required to reference the RoHS compliance. Examples: MF-R110 ..................Bulk packaging MF-R110-0-99 .........Bulk packaging with part number suffix option MF-R110-2...............Tape and reel packaging MF-R110-2-99 .........Tape and reel packaging with part number suffix option MF-R090-0-9-99 ......Bulk packaging with part number suffix option MF-R250-0-10-99 ....Bulk packaging with part number suffix option *Packaged per EIA486-B Typical Part Marking: MF-R005 - R025 Time to trip (Seconds) 100 Represents total content. Layout may vary. PART IDENTIFICATION 10 025 MANUFACTURER'S TRADEMARK 1 0A DATE CODE: WEEK 1 OF 2000 = 0A (YEAR & WEEK) WEEK 27 OF 2000 = A0 (WEEK & YEAR) Typical Part Marking: MF-R030 - R1100 0.1 Represents total content. Layout may vary. PART IDENTIFICATION 0.01 0.001 1 10 Fault Current (Amps) 100 DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR) MANUFACTURER'S TRADEMARK R250 0180T LOT NO. (T = TAIWAN S = CHINA) MF-R SERIES, REV. AD, 08/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details. IEC Mark EIA Mark Carrier tape width W W Hold down tape width W0 W4 Dimension Description Hold down tape Dimensions Dimensions Tolerance 18 -0.5/+1.0 (.709) (-0.02/+.039) 11 min. (.433) No protrusion Top distance between tape edges W2 W6 Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 Overall width w/o lead protrusion (kinked lead) C2 3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold-down tape I2 I2 Not specified Sprocket hole pitch P0 P0 12.7 (0.5) Pitch tolerance 20 consecutive max. -0.5/+0.75 (-0.02/+0.03) ±0.2 (±.0078) ±3.0 (±.118) ±0.5 (±.02) max. max. max. max. max. max. max. max. ±0.3 (±.012) ±1 (±.039) Device pitch: MF-R005–MF-R160, MF-R/90, MF-RX110/72–MF-RX185/72 12.7 (0.5) ±0.3 (±.012) Device pitch: MF-R185–MF-R400, MF-RX110–MF-RX375 MF-R/600, MF-RX250/72–MF-RX375/72 25.4 (1.0) ±0.6 (±.024) 0.9 (.035) max. Tape thickness t t Tape thickness with splice: MF-R010–MF-R160, MF-RX110/72–MF-RX185/72 t1 1.5 (.059) max. Tape thickness with splice: MF-R250–MF-R1100, MF-RX110–MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 t1 2.3 (.091) max. Splice sprocket hole alignment 0 Body lateral deviation Δh Δh 0 Body tape plane deviation Δp Δp 0 ±0.3 (±.012) ±1.0 (±.039) ±1.3 (±.051) DIMENSIONS: Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. MM (INCHES) MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications IEC Mark EIA Mark Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 F F Lead spacing: MF-RX/250 F F Reel width w W2 Reel diameter d a W1 h Arbor hole diameter f c Core diameter: MF-R, MF-RX, MF-R/90 h n Core diameter: MF-RX/250, MF-R/600 h n Dimension Description Space between flanges less device Box: MF-R, MF-RX, MF-R/90 Box: MF-RX/250 Box: MF-R/600 Dimensions Dimensions Tolerance 5.08 ±0.2 (0.2) (±0.008) 5.08 -0.5/+0.6 (0.2) (-.020/+.024) 56.0 max. (2.205) 370.0 max. (14.57) 4.75 ±3.25 (.187) (±.128) 26.0 ±12.0 (1.024) (±.472) 80 max. (3.15) 91 max. (3.58) 62 355 345 nom. (2.44) (14.0) (13.6) 67 372 362 max. (2.64) (14.6) (14.25) 64 372 362 max. (2.52) (14.6) (14.25) Consecutive missing places: MF-R, MF-RX, MF-R/90 3 Consecutive missing places: MF-RX/250, MF-R/600 none max. Empty places per reel: MF-R, MF-RX, MF-R/90 Not specified Empty places per reel: MF-RX/250, MF-R/600 0.1 % Taped Component Dimensions Figure 1 Δh Δp Δh Δp Reference plane P1 H1 A L I2 H1 F H H0 B W0 P0 I1 D0 W1 W User direction of feed Cross section A - B t Reel Dimensions - Figure 2 Reel h d User direction of feed Upper side Tape Lower side f h w DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.