IA NT Features ■ ■ Agency recognition: PL M CO oH S ■ ■ *R Applications Radial Leaded Devices Maximum 600 VAC interrupt fault rating Available in matched resistance “bins” Ability to withstand lightning surges RoHS compliant*, lead free ■ ■ Customer Premise Equipment (CPE): ■ Modems ■ Cable modems ■ Fax machines ■ POS equipment ■ Security equipment ■ Set top boxes MF-R/600 Series - Telecom PTC Resettable Fuses Electrical Characteristics Model MF-R015/600 MF-R015/600-A MF-R015/600-B MF-R015/600-F MF-R016/600 MF-R016/600-A MF-R016/600-1 Max. Operating Voltage 60 60 60 60 60 60 60 Max. Interrupt Ratings Volts Amps Max. Max. 600 600 600 600 600 600 600 3 3 3 3 3 3 3 Hold Current Trip Current Amps at 23 °C Amps at 23 °C 0.15 0.15 0.15 0.15 0.16 0.16 0.16 0.30 0.30 0.30 0.30 0.32 0.32 0.32 Initial Resistance One Hour Max. Time Tripped Post-Trip To Trip Power Resistance @1A Dissipation Ohms at 23 °C Ohms at 23 °C Ohms at 23 °C Min. Max. Max. 6.0 7.0 9.0 7.0 4.0 4.0 4.0 12.0 10.0 12.0 12.0 10.0 7.0 8.0 22.0 20.0 22.0 22.0 18.0 16.0 17.0 Seconds at 23 °C Watts at 23 °C Typ. 5.0 5.0 5.0 5.0 7.0 7.0 7.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Environmental Characteristics Operating/Storage Temperature ..............................-40 °C to +85 °C Maximum Device Surface Temperature in Tripped State......................................................125 °C Passive Aging ..........................................................+85 °C, 1000 hours ..........................................................±5 % typical resistance change +60 °C, 1000 hours ±5 % typical resistance change Humidity Aging ........................................................+85 °C, 85 % R.H. 500 hours ..........................................±5 % typical resistance change Thermal Shock ........................................................MIL-STD-202F, Method 107G, ........................................±10 % typical resistance change +125 °C to -55 °C,10 times ±15 % typical resistance change Solvent Resistance ..................................................MIL-STD-202, Method 215B............................................No change Lead Solerability ......................................................ANSI/J-STD-002 Flammability ............................................................IEC 695-2-2......................................................................No Flame for 60 secs. Vibration ..................................................................MIL-STD-883C, Method 2007.1, Condition A..................No change Test Procedures And Requirements For Model MF-R/600 Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................Verify dimensions and materials..................Per MF physical description Resistance ..........................................................In still air @ 23 °C ........................................Rmin ≤ R ≤ Rmax Time to Trip ........................................................5 times Ihold, Vmax, 23 °C..........................T ≤ max. time to trip (seconds) Hold Current ......................................................30 min. at Ihold............................................No trip Trip Cycle Life ....................................................Vmax, Imax, 100 cycles ..............................No arcing or burning Trip Endurance....................................................Vmax, 48 hours ..........................................No arcing or burning UL File Number ..................................................E 174545S CSA File Number ................................................CA 110338 Thermal Derating Chart - Ihold (Amps) Ambient Operating Temperature Model MF-R015/600 MF-R016/600 -40 °C 0.233 0.249 -20 °C 0.206 0.219 0 °C 0.178 0.190 Itrip is approximately two times Ihold. *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 23 °C 0.150 0.160 40 °C 0.124 0.132 50 °C 0.110 0.117 60 °C 0.096 0.103 70 °C 0.083 0.088 85 °C 0.062 0.066 Additional Features ■ Ability to withstand AC power cross conditions MF-R/600 Series - Telecom PTC Resettable Fuses Product Dimensions Model MF-R015/600 MF-R016/600 A Max. 13.5 (0.531) B Max. 12.6 (0.496) C Max. 6.0 (0.236) D Min. 4.7 (0.185) E Nom. 5.0 (0.197) 16.0 (0.629) 12.6 (0.496) 6.0 (0.236) 4.7 (0.185) 5.0 (0.197) Packaging options: BULK: 500 pcs. per bag. Longer lead lengths available upon request. A C PART IDENTIFICATION R015 DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; SECOND DIGIT = MONTH; NEXT THREE DIGITS = LOT CODE) 24001K MF - R 015/600 - A 05 - 2 Multifuse® Product Designator Series R = Radial Leaded Component MFG. LOCATION (K = KOREA S = CHINA) Hold Current, Ihold 015-016 (0.15 - 0.16 Amps) Max. Interrupt Voltage, V Resistance Range Narrow resistance ranges are available on all models as defined in Electrical Characteristics. Maximum Time to Trip at 23 ˚C 1000 Time to Trip (Seconds) MM (INCHES) How to Order MANUFACTURER'S TRADEMARK B Sn/Cu DIMENSIONS = Typical Part Marking E 0.65 (0.026) 1 TAPE & REEL: 600 pcs. per reel. Represents total content. Layout may vary. D Physical Characteristics Style Lead Dia. Material 0.65 1 Sn/Cu (0.026) Resistance Bins Narrow resistance ranges can be separated into packages where each device is within 0.5 ohms of each other. MF-R016/600 100 Packaging Options - 0 = Bulk Packaging - 2 = Tape and Reel* MF-R015/600 *Packaged per EIA486-B 10 1 0.10 0.00 0.50 1.00 1.50 2.00 2.50 3.00 Fault Current (Amps) Resistance Options Model MF-R015/600 MF-R015/600-A MF-R015/600-B MF-R015/600-F MF-R016/600 MF-R016/600-A MF-R016/600-1 Rmin. 6.0 7.0 9.0 7.0 4.0 4.0 4.0 Rmax. 12.0 10.0 12.0 12.0 10.0 7.0 8.0 R1Max. 22.0 20.0 22.0 22.0 18.0 16.0 17.0 Bin N/A 0.5 0.5 0.5 N/A 0.5 0.5 MF-R/600, REV. E, 11/04 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MF-R, MF-R/72, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details. Dimension Description IEC Mark EIA Mark Carrier tape width W W Hold down tape width: W0 W4 Hold down tape Top distance between tape edges Dimensions Dimensions Tolerance 18 (.709) 11 (.433) min. No protrusion W2 W6 Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 Overall width w/o lead protrusion (kinked lead) C2 3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold tape I2 I2 Not specified Sprocket hole pitch P0 P0 12.7 (0.5) Pitch tolerance Device pitch: MF-R005–MF-R160, MF-R/90, MF-RX110/72–MF-RX185/72, MF-R/72 Device pitch: MF-R185–MF-R400, MF-RX110–MF-RX375 MF-R/600, MF-RX250/72–MF-RX375/72 Tape thickness Tape thickness with splice: MF-R010–MF-R160, -0.5/+1.0 (-0.02/+.039) t MF-R/72, MF-RX110/72–MF-RX185/72, max. max. max. max. max. max. max. max. 20 consecutive ±0.3 (±.012) ±1 (±.039) 12.7 (0.5) ±0.3 (±.012) 25.4 (1.0) ±0.6 (±.024) t1 0.9 (.035) 1.5 (.059) max. t1 2.3 (.091) max. t Tape thickness with splice: MF-R250–MF-R1100 MF-RX110–MF-RX375, MF-R/90, MF-RX250/72–MF-RX375/72 max. -0.5/+0.75 (-0.02/+0.03) ±0.2 (±.0078) ±3.0 (±.118) ±0.5 (±.02) Splice sprocket hole alignment 0 Body lateral deviation ∆h ∆h Body tape plane deviation ∆p ∆p Lead spacing F F Reel width w W2 Reel diameter d a Space between flanges less device W1 h 0 0 5.08 (0.2) 56 (2.205) 370 (14.57) 4.75 (.187) max. ±0.3 (±.012) ±1.0 (±.039) ±1.3 (±.051) ±0.2 (±.008) max. max. ±3.25 (±.128) DIMENSIONS = Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MM (INCHES) MF-R, MF-R/72, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications IEC Mark Dimension Description EIA Mark Dimensions Dimensions Tolerance Arbor hole diameter f c 26 (1.024) ±12.0 (±.472) Core diameter: MF-R, MF-RX, MF-R/90 h n 80 (3.15) max. Core diameter: MF-RX/250, MF-R/600 h n 91 (3.58) max. 56 (2.2) 67 (2.64) 64 (2.52) Box: MF-R, MF-RX, MF-R/90 Box: MF-RX/250 Box: MF-R/600 372 (14.6) 372 (14.6) 372 (14.6) Consecutive missing places: MF-R, MF-RX, MF-R/90 3 Consecutive missing places: MF-RX/250, MF-R/600 none 372 (14.6) 362 (14.25) 362 (14.25) Empty places per reel: MF-R, MF-RX, MF-R/90 Not specified Empty places per reel: MF-RX/250, MF-R/600 0.1 % max. max. max. max. Taped Component Dimensions - Figure 1 ∆p ∆h ∆h ∆p Reference plane P1 H1 A L I2 H1 F H H0 B W0 I1 P0 D0 DIMENSIONS = MM (INCHES) W1 W User direction of feed Cross section A - B Reel Dimensions - Figure 2 t Reel h d User direction of feed Upper side Tape Lower side f h w Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.