mfr600

T
PL
IA
N
M
Features
Applications
■ Radial Leaded Devices
Customer Premise Equipment (CPE):
■ Modems
■ Cable modems
■ Fax machines
■ POS equipment
■ Security equipment
■ Set top boxes
*R
oH
S
CO
■ Maximum 600 VAC interrupt fault rating
■ Available in matched resistance “bins”
■ Ability to withstand lightning surges
■ RoHS compliant*
■ Agency recognition:
MF-R/600 Series - Telecom PTC Resettable Fuses
Electrical Characteristics
Model
Max.
Operating
Voltage
(VDC)
MF-R015/600
MF-R015/600-A
MF-R015/600-B
MF-R015/600-F
MF-R016/600
MF-R016/600-A
MF-R016/600-1
250
250
250
250
250
250
250
Max.
Interrupt
Ratings
Volts
Amps
Max.
600
600
600
600
600
600
600
Max.
3
3
3
3
3
3
3
Hold
Current
Trip
Current
Amps
at 23 °C
Amps
at 23 °C
0.15
0.15
0.15
0.15
0.16
0.16
0.16
0.30
0.30
0.30
0.30
0.32
0.32
0.32
Initial Resistance
Ohms
at 23 °C
Min.
6.0
7.0
9.0
7.0
4.0
4.0
4.0
Ohms
at 23 °C
Max.
12.0
10.0
12.0
12.0
10.0
7.0
8.0
One Hour Max. Time
Tripped
Post-Trip To Trip @
Power
Resistance
1A
Dissipation
Ohms
Seconds
Watts
at 23 °C
at 23 °C
at 23 °C
Max.
22.0
5.0
1.0
20.0
5.0
1.0
22.0
5.0
1.0
22.0
5.0
1.0
18.0
7.0
1.0
16.0
7.0
1.0
17.0
7.0
1.0
Environmental Characteristics
Operating/Storage Temperature ........................... -40 °C to +85 °C
Maximum Device Surface Temperature
in Tripped State ................................................. 125 °C
+60 °C, 1000 hours ............................................... ±5 % typical resistance change
Humidity Aging...................................................... +85 °C, 85 % R.H. 500 hours ............................... ±5 % typical resistance change
Thermal Shock ..................................................... MIL-STD-202F, Method 107G,
+125 °C to -55 °C,10 times ................................... ±15 % typical resistance change
Solvent Resistance ............................................... MIL-STD-202, Method 215B ................................. No change
Lead Solderability ................................................. ANSI/J-STD-002
Flammability ......................................................... IEC 695-2-2 .......................................................... No Flame for 60 secs.
Vibration ............................................................... MIL-STD-883C, Method 2007.1, Condition A ....... No change
Test Procedures And Requirements For Model MF-R/600 Series
Test
Test Conditions
Accept/Reject Criteria
Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description
Resistance ............................................................ In still air @ 23 °C ................................................. Rmin ≤ R ≤ Rmax
Time to Trip ........................................................... 1 A, Vmax, 23 °C .................................................. T ≤ max. time to trip (seconds)
Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip
Trip Cycle Life ....................................................... Vmax, Itrip, 100 cycles.......................................... No arcing or burning
Trip Endurance ..................................................... Vmax, 24 hours..................................................... No arcing or burning
UL File Number .................................................... E307915
TÜV File Number .................................................. R 50256529
Thermal Derating Chart - Ihold (Amps)
Model
Ambient Operating Temperature
-40 °C
-20 °C
0 °C
23 °C
40 °C
50 °C
60 °C
70 °C
85 °C
MF-R015/600
0.233
0.206
0.178
0.150
0.124
0.110
0.096
0.083
0.062
MF-R016/600
0.249
0.219
0.190
0.160
0.132
0.117
0.103
0.088
0.066
Itrip is approximately two times Ihold.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Additional Features
■ Ability to withstand AC power cross conditions
MF-R/600 Series - Telecom PTC Resettable Fuses
Product Dimensions
A
Max.
13.5
(0.531)
16.0
(0.629)
Model
MF-R015/600
MF-R016/600
B
Max.
12.6
(0.496)
12.6
(0.496)
Packaging options: BULK: 500 pcs. per bag.
Longer lead lengths available upon request.
A
C
Max.
6.0
(0.236)
6.0
(0.236)
D
Min.
4.7
(0.185)
4.7
(0.185)
Physical Characteristics
Style
Lead Dia.
Material
0.65
1
Sn/Cu
(0.026)
0.65
1
Sn/Cu
(0.026)
E
Nom.
5.0
(0.197)
5.0
(0.197)
TAPE & REEL: 600 pcs. per reel.
DIMENSIONS:
How to Order
Typical Part Marking
C
MM
(INCHES)
MF - R 015/600 - A 05 - 2
Represents total content. Layout may vary.
®
MANUFACTURER'S
TRADEMARK
PART
IDENTIFICATION
B
R015
DATE CODE
(FIRST DIGIT =
LAST DIGIT OF YEAR;
SECOND DIGIT =
MONTH;
NEXT THREE DIGITS =
LOT CODE)
E
D
24001K
MFG. LOCATION
(K = KOREA
S = CHINA
T = TAIWAN)
Typical Time to Trip at 23 ˚C
Time to Trip (Seconds)
1000
MF-R016/600
100
MF-R015/600
Multifuse
Product
Designator
Series
R = Radial Leaded
Component
Hold Current, Ihold
015-016 (0.15 - 0.16 Amps)
Max. Interrupt Voltage, V
Resistance Range
• Narrow resistance ranges are
available on all models as defined in
Electrical Characteristics.
• Blank = N/A
Resistance Bins
• Narrow resistance ranges can be
separated into packages where each
device is within 0.5 ohms of each other.
• Blank = N/A
Packaging Options
- 0 = Bulk Packaging
- 2 = Tape and Reel*
*Packaged per EIA486-B
10
1
0.10
0.00
0.50
1.00
1.50
2.00
2.50
3.00
Fault Current (Amps)
Resistance Options
Model
MF-R015/600
MF-R015/600-A
MF-R015/600-B
MF-R015/600-F
MF-R016/600
MF-R016/600-A
MF-R016/600-1
Rmin.
6.0
7.0
9.0
7.0
4.0
4.0
4.0
Rmax.
12.0
10.0
12.0
12.0
10.0
7.0
8.0
R1Max.
22.0
20.0
22.0
22.0
18.0
16.0
17.0
Bin
N/A
0.5
0.5
0.5
N/A
0.5
0.5
MF-R/600, REV. K, 09/15
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series
Tape and Reel Specifications
Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.
IEC
Mark
EIA
Mark
Carrier tape width
W
W
Hold down tape width
W0
W4
Dimension Description
Hold down tape
Dimensions
Dimensions
Tolerance
18
-0.5/+1.0
(.709)
(-0.02/+.039)
11
min.
(.433)
No protrusion
Top distance between tape edges
W2
W6
Sprocket hole position
W1
W5
Sprocket hole diameter
D0
D0
Abscissa to plane (straight lead)
H
H
Abscissa to plane (kinked lead)
H0
H0
Abscissa to top (straight lead)
H1
H1
Abscissa to top (kinked lead)
H1
H1
Overall width w/lead protrusion (straight lead)
C1
Overall width w/lead protrusion (kinked lead)
C1
Overall width w/o lead protrusion (straight lead)
C2
Overall width w/o lead protrusion (kinked lead)
C2
3
(.118)
9
(.354)
4
(.157)
18.5
(.728)
16
(.63)
38.0
(1.496)
32.2
(1.268)
55.0
(2.165)
43.2
(1.7)
54.0
(2.126)
42.5
(1.673)
1.0
(.039)
11
(.433)
Lead protrusion
I1
L1
Protrusion of cutout
L
L
Protrusion beyond hold-down tape
I2
I2
Not specified
Sprocket hole pitch
P0
P0
12.7
(0.5)
Pitch tolerance
20 consecutive
max.
-0.5/+0.75
(-0.02/+0.03)
±0.2
(±.0078)
±3.0
(±.118)
±0.5
(±.02)
max.
max.
max.
max.
max.
max.
max.
max.
±0.3
(±.012)
±1
(±.039)
Device pitch: MF-R005–MF-R160, MF-R/90,
MF-RX110/72–MF-RX185/72
12.7
(0.5)
±0.3
(±.012)
Device pitch: MF-R185–MF-R400, MF-RX110–MF-RX375
MF-R/600, MF-RX250/72–MF-RX375/72
25.4
(1.0)
±0.6
(±.024)
0.9
(.035)
max.
Tape thickness
t
t
Tape thickness with splice: MF-R010–MF-R160,
MF-RX110/72–MF-RX185/72
t1
1.5
(.059)
max.
Tape thickness with splice: MF-R250–MF-R1100,
MF-RX110–MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72
t1
2.3
(.091)
max.
Splice sprocket hole alignment
0
Body lateral deviation
Δh
Δh
0
Body tape plane deviation
Δp
Δp
0
±0.3
(±.012)
±1.0
(±.039)
±1.3
(±.051)
DIMENSIONS:
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
MM
(INCHES)
MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series
Tape and Reel Specifications
IEC
Mark
EIA
Mark
Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72
F
F
Reel width
w
W2
Reel diameter
d
a
W1
h
Arbor hole diameter
f
c
Core diameter: MF-R, MF-RX, MF-R/90
h
n
Core diameter: MF-R/600
h
n
Dimension Description
Space between flanges less device
Box: MF-R, MF-RX, MF-R/90
Box: MF-R/600
Dimensions
Dimensions
Tolerance
5.08
±0.2
(0.2)
(±0.008)
56.0
max.
(2.205)
370.0
max.
(14.57)
4.75
±3.25
(.187)
(±.128)
26.0
±12.0
(1.024)
(±.472)
80
max.
(3.15)
91
max.
(3.58)
62
355
345
nom.
(2.44) (14.0) (13.6)
64
372
362
max.
(2.52) (14.6) (14.25)
Consecutive missing places: MF-R, MF-RX, MF-R/90
3
Consecutive missing places: MF-R/600
none
Empty places per reel: MF-R, MF-RX, MF-R/90
Not specified
Empty places per reel: MF-R/600
0.1 %
Taped Component Dimensions Figure 1
p
h
h
max.
p
Reference plane
P1
H1
A
L
I2
H1
F
H
H0
B
W0
I1
P0
D0
W1
W
User direction of feed
Cross section A - B
Reel Dimensions - Figure 2
t
Reel
h
d
User
direction
of
feed
Upper side
Tape
Lower side
f
h
w
DIMENSIONS:
MM
(INCHES)
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.