RGP10A TH R U RGP10M R GLASS PASSIVATED FAST RECOVERY RECTIFIER Reverse Voltage: 50 to 1000 Volts Forward Current:1.0Ampere S E M I C O N D U C T O R DO-41 FEATURES Glass passivated junction Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique High temperature soldering guaranteed:260°C/10 seconds at terminals Component in accordance to RoHS 2011/65/EU 1.0(25.4) MIN 0.107(2.7) 0.080(2.0) DIA 0.205(5.20) 0.161(4.10) MECHANICAL DATA Case: JEDEC DO-41 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750,method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012ounce, 0.33 gram 1.0(25.4) MIN 0.034(0.85) 0.026(0.65) DIA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Dimensions in inches and (millimeters) (Rating at 25 C ambient temperature unless otherwise specified.Single phase ,half wave ,60HZ,resistive or inductive load. For capacitive load,derate current by 20%.) RGP RGP RGP RGP RGP RGP RGP Symbols 10D 10B 10A 10K 10M 10G 10J Units Volts Volts Volts Maximum DC Blocking Voltage VRRM VRMS VDC Maximum Average Forward Rectified Current 0.375"(9.5mm)lead length at TA=55°C I(AV) 1.0 Amps Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 30.0 Amps VF 1.3 Volts IR 30 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum Instantaneous Forward Voltage at 1.0 A 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 5.0 Ta=25°C Maximum DC Reverse Current Ta=125°C at rated DC blocking voltage Ta=150°C 50 trr CJ R JA Maximum reverse recovery time(Note1) Typical junction capacitance(Note2) Typical thermal resistance (Note 3) Operating junction and storage temperature range A 150 TJ TSTG 250 500 ns 15.0 pF 55.0 °C/W -65 to+175 °C Note: 1.Test conditions: IF=0.5A,IR=1.0A,IRR=0.25A. 2.Measured at 1MHZ and applied reverse voltage of 4.0 Volts D.C 3. Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. Mounted. JINAN JINGHENG ELECTRONICS CO., LTD. 2-1 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC CURVES RGP10A THRU RGP10M FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.0 50 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.8 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT (A) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 0.6 0.4 SINGIE PHASE HAIF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 0.2 0 0 25 50 75 100 125 150 175 40 30 20 10 0 AMBIENT TEMPERATURE (°C) 1 2 4 6 8 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT(MICROAMPERES) INSTANTANEOUS FORWARD CURRENT( AMPERES) 100 10 3 1 0.3 0.1 TJ=25°C Pulse Width=300µs 0.03 1% Duty Cycle 10 1 =125°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 =150°C 1.8 0.1 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC JUNCTION CAPACITANCE(pF) FIG.5-TYPICAL JUNCTION CAPACITANCE 200 100 50W 10W NONINDUCTIVE NONINDUCTIVE trr +0.5A 60 40 (+) D.U.T. PULSE GENERATOR (NOTE2) 50Vdc 20 (-) 10 TJ=25°C 6 0 -0.25A (ADJUSTABLE) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE1) 4 NOTES:1.Rise Time=7ns max. input lmpedance=1 megohm 22pF 2.Rise Time=10ns max. source lmpedance =50 ohms 2 1 0.1 0.2 0.4 1 2 4 10 20 40 100 -1.0A 1cm SET TIME BASE FOR 50/100 ns/cm REVERSE VOLTAGE. (V) JINAN JINGHENG ELECTRONICS CO., LTD. 2-2 HTTP://WWW.JINGHENGGROUP.COM