ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type NNC Halogen-Free Metric Wiring Duct • Material: Halogen-free modified polyphenylene oxide (mPPO) material as verified with IEC 60754-2 test method (test on gases evolved during combustion of electric cables) • UL recognized continuous use temperature: 203°F (95°C) • UL 94 flammability rating of V-0 • Conforms with NFPA 79-2007 section 13.3.1 requirement for flame retardant material • Provided with DIN 43 659 mounting holes • Metric sizing and finger progression • Duct and cover packaged together in two meter lengths B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties W H .98 TYP [25.0] .39 TYP [10.0] Duct Size (W x H)* Slot Width Base and Replacement Cover Cover Replacement Ctn. Ctn. Cover Qty. Qty. Part Number (m) (m) NC25LG2 20 20 NC25LG2 20 20 NC25LG2 20 20 NC25LG2 20 20 NC37LG2 20 20 Base and Cover Part Number NNC25X25LG2 NNC25X37LG2 NNC25X50LG2 NNC25X75LG2 NNC37X37LG2 mm 24.6 x 23.6 24.6 x 35.8 24.6 x 47.8 24.6 x 72.4 37.1 x 35.8 In. .97 x .93 .97 x 1.41 .97 x 1.88 .97 x 2.85 1.46 x 1.41 In. .39 .39 .39 .39 .39 mm 10.0 10.0 10.0 10.0 10.0 NNC37X50LG2 NNC37X75LG2 NNC50X50LG2 NNC50X75LG2 NNC50X100LG2 NNC75X75LG2 37.1 37.1 49.5 49.5 49.5 74.7 1.46 1.46 1.95 1.95 1.95 2.94 1.88 2.85 1.88 2.85 3.85 2.85 .39 .39 .39 .39 .39 .39 10.0 10.0 10.0 10.0 10.0 10.0 NC37LG2 NC37LG2 NC50LG2 NC50LG2 NC50LG2 NC75LG2 20 20 20 10 10 10 20 20 20 20 20 20 NNC100X50LG2 NNC100X75LG2 NNC100X100LG2 99.6 x 47.8 99.6 x 72.4 99.6 x 97.8 3.92 x 1.88 3.92 x 2.85 3.92 x 3.85 .39 .39 .39 10.0 10.0 10.0 NC100LG2 NC100LG2 NC100LG2 10 10 10 20 20 20 x x x x x x 47.8 72.4 47.8 72.4 97.8 72.4 x x x x x x C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors Available in LG (Light Gray) and WH (White). Do not allow cutting, tapping, or cleaning fluids that contain hydrocarbons to come in contact with type NNC wiring duct as it will cause stress cracking. See page C1.49 for a list of chemicals to avoid. *"H" dimension includes duct and cover. D3. Grounding Connectors Multiple slot restrictors present with 75mm and greater duct wall height. E1. Labeling Systems Panduct Type NNC Divider Wall ® • NNC solid divider wall can be mounted inside NNC and NE wiring duct to create multiple channels • Material: Halogen-free modified polyphenylene oxide (mPPO) • Simply install the divider wall base when mounting the duct and snap the divider wall onto mounting base, DB-C Part Number NNC50DWH2 Length (m) 2 For Nominal Duct Height (mm) 50 NNC75DWH2 2 75 E2. Labels Std. Pkg. Qty. 2 Std. Ctn. Qty. (m) 40 E3. Pre-Printed & Write-On Markers 2 40 E4. Permanent Identification Available in WH (White) color only. NOTE: Must be used with mounting base DB-C (see page C1.26), which is sold separately. Install mounting bases to the duct channel, locate within 2" of each divider wall end and at least every 12" along the length. E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)