QuickNet Small Diameter Trunk Assemblies (OFNP/LSZH): FBSP74-WW-ENG

QuickNet™ Small Diameter Trunk Cable
Assemblies OFNP and LSZH
S P E C I F I C AT I O N S H E E T
technical information
Small Diameter Trunk Cable Assemblies allow for rapid deployment of high-density permanent links
in a single assembly for data center applications requiring quick infrastructure deployment, such as
main, horizontal, and zone distribution areas. These trunk cable assemblies optimize cable routing
requirements to ensure efficient use of pathway space and significantly reduce installation time and
cost. QuickNet™ Small Diameter Trunk Cable Assemblies are built with modular MPO connectivity
and provide compatibility, flexibility and system performance in all permanent link applications. All
small diameter trunk cable assemblies are factory terminated and tested to deliver verified optical
performance and reliability for improved network integrity. 10Gig versions provide 10 Gb/s network
performance up to 300 meters for OM3 and up to 550 meters for OM4 per IEEE 802.3ae 10 GbE
standard while maintaining compatibility with legacy systems.
application
Allows system designers to tailor configuration, reach and breakout construction to application requirements; to minimize waste, optimize cable
management, speed deployment, improve flexibility and manageability for lower installation costs. Small diameter trunk cable assemblies use
30 – 40% less space which is ideal for high cable density applications.
construction
physical properties
Cable type:
Indoor Small Diameter Trunk
Cable
jacket ratings:
Plenum (OFNP) NFPA 262
Low Smoke Zero Halogen (LSZH)
IEC 60332-1 and IEC 60332-3C
Cable outside
diameter (OD):
12-fiber:
24-fiber:
Cable weight
(kg/km) (lb/kft):
Fiber types:
Singlemode:
Multimode:
12-fiber LSZH: 22.2kg/km (14.9 lb/kft)
24-fiber LSZH: 29.7kg/km (19.9 lb/kft)
12-fiber Plenum: 23.6kg/km (15.9 lb/kft)
24-fiber Plenum: 31.7kg/km (21.3lb/kft)
Minimum bend radius:
Under load: 20 x Cable OD
Static:
10 x Cable OD
OS1/OS2 9/125µm
OM3 50/125µm
OM4 50/125µm
4.5mm
5.4mm
Connector
types end ‘A’:
MPO Female or MPO Male,
LC Duplex (12F only)
Cable tensile strength:
440N
Connector
types end ‘B’:
MPO Female or MPO Male,
LC Duplex (12F only)
Cable compressive load:
10 N/mm
Fiber count:
12 and 24
Connector
cable retention:
50N
Jacket color:
OS1/OS2
OM3
OM4
Connector durability:
500 mating cycles*
Breakout
outside diameter:
3.0mm
Transition
outside diameter:
12-fiber:
24-fiber:
10mm
10mm
Pulling eye diameter:
12-fiber:
24-fiber:
19mm
23mm
Breakout length:
1m
Yellow
Aqua
Aqua
*With proper cleaning and inspecting.
optical properties
environmental properties
Maximum cable
attenuation:
Operating temperature:
-20°C to + 70°C
(-4°F to 158°F)
Storage and
shipping temperature:
-40°C to +70°C
(-40°F to 158°F)
Installation temperature:
-10°C to + 60°C
(14°F to 140°F)
Singlemode:
Multimode:
Maximum
connector
insertion loss:
Minimum
connector
return loss:
0.4dB/km at 1310nm
0.3dB/km at 1550nm
3.0dB/km at 850nm
1.5dB/km at 1300nm
Standard Singlemode MPO:
Standard Multimode MPO:
Optimized Multimode MPO:
0.75dB
0.50dB
0.35dB
Standard Singlemode LC:
Standard Multimode LC:
Optimized Multimode LC:
0.35dB
0.25dB
0.15dB
Singlemode:
Multimode:
www.panduit.com
55dB
MPO 30dB
LC 26dB
standards
Meets or exceeds: ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-5
(FOCIS-5), TIC/EIA-568-C.1, GR-409-CORE,
ICEA S-83-596 RoHS Complaint
QuickNet™ Small Diameter Trunk Cable Assemblies OFNP and LSZH
part number
Example: FXUYP5E5EAAM030 = OM3, 24-fiber, indoor small diameter trunk cable, plenum, MPO female to MPO female, polarity A, pulling eye,
30 meters.
CHARACTER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
EXAMPLE
F
X
U
Y
P
5
E
5
E
A
A
M
0
3
0
1 – Fiber
F = Fiber
2 – Fiber Type
9 = OS1/OS2 9/125µm
X = OM3 50/125µm
Z = OM4 50/125µm
3 – Fiber Count
T = 12 fiber
U = 24 fiber
4 – Cable Type
Y = Indoor small diameter
trunk cable
5 – Jacket Type
P = Plenum (OFNP)
L = Low Smoke Zero Halogen (LSZH)
6 – Connector Type (end A)
5 = MPO female connector
6 = MPO male connector
L = LC duplex (12F only)
11 – Other
A = Pulling eye end A
N = No pulling eye (lengths less than
20 meters/60 feet only)
12 – Unit of Length
M = Meters
F = Feet
13, 14, 15 – Cable Assembly Length
M = 005 – 100
F = 016 – 300
7 – Connector Variant
E = (MPO) 2 = 2mm upjacket (LC)
2 = 2.0mm upjacket (LC)
8 – Connector Type (end B)
5 = MPO female connector
6 = MPO male connector
L = LC Duplex (12F only)
9 – Connector Variant
E = 1m breakout (MPO)
2 = 2.0mm upjacket (LC)
10 – Construction/Performance
A = Polarity Method A, Standard IL
(MPO to MPO)
B = Polarity Method B, Standard IL
(MPO to MPO)
O = Optimized Performance/Std.
Polarity (MPO to LC or LC to LC)
S = Std. Performance/Std. Polarity
(MPO to LC or LC to LC)
X = Polarity Method A, Optimized IL
(MPO to MPO)
Y = Polarity Method B, Optimized IL
(MPO to MPO)
small diameter trunk cable assembly detaIl
Overall length – Between connector end faces
1 Meter
1 Meter
12-Fiber Female MPO Connector
12-Fiber Female MPO Connector
White dot on connector side
identifies location of
fiber position 1
Please contact Panduit customer service for information on additional part number options.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
© 2014 Panduit Corp.
ALL RIGHTS RESERVED.
FBSP74--WW-ENG
10/2014