5190

SHD324311
SHD324311P
SHD324311N
SHD324311D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 5190, REV. A
HERMETIC ULTRAFAST RECTIFIER
SINGLE / DUAL - COM. CATHODE / COM. ANODE / DOUBLER
DESCRIPTION: 200 VOLT, 20 AMP, 35 NANOSECOND HERMETIC RECTIFIERS IN A TO-258 PACKAGE.
Ceramic Seal Option – For ceramic seals use part number prefix SHDC
MAX RATINGS / ELECTRICAL CHARACTERISTIC
ALL RATINGS ARE AT TA = 250 C UNLESS OTHERWISE SPECIFIED
RATING
PEAK INVERSE VOLTAGE (PER LEG)
SYMBOL
MAX.
UNITS
PIV
200
Volts
MAXIMUM FORWARD VOLTAGE DROP (PER LEG) (If = 20 A)
1.1
(Single)
(P)
Vf
1.1
(N)
1.2
(D)
1.2
Volts
MAXIMUM FORWARD VOLTAGE DROP @ TA = 125C (PER LEG) (If = 20 A)
(Single)
Vf
1.0
(P)
1.0
(N)
1.1
(D)
O
MAXIMUM DC OUTPUT CURRENT (TC = 100 C)
Volts
1.1
IO
20
Amps
IFSM
250
Amps
MAXIMUM REVERSE RECOVERY TIME (PER LEG) @ IF = 0.5A, IR = 1.0A,
IRR = 0.25A
trr
35
nsec
MAXIMUM REVERSE CURRENT IRM @ PIV (PER LEG) @ TA = 25C
IRM
20
A
MAXIMUM REVERSE CURRENT IRM @ PIV (PER LEG) @ TA = 125C
IRM
1.0
mA
MAXIMUM THERMAL RESISTANCE (PER LEG)
RJC
2.0
C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
Top/stg
-55 to
+150
C
PEAK SINGLE CYCLE SURGE CURRENT (PER LEG)
tp = 8.3 msec
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SHD324311
SHD324311P
SHD324311N
SHD324311D
SENSITRON
TECHNICAL DATA
DATA SHEET 5190, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.165 (4.19
Dia.
.155 3.94)
.270 (6.86
.240 6.10)
.695 (17.65
.685 17.40)
.045 (1.14
.035 0.89)
.835 (21.21
.815 20.70)
.707 (17.96
.697 17.70)
1.302 (33.07
1.202 30.53)
1
2
.065 (1.65
.055 1.40)
3 Places
.550 (13.97
.530 13.46)
3
.200(5.08) BSC
2 Places
.140(3.56) BSC
TO-258
PINOUT TABLE
DEVICE TYPE
SINGLE RECTIFIER
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/ CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of
users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2013 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]