REEL TAPING SPECIFICATIONS FOR SS DEVICES P0 d P1 E F B W P A 3 MAX. A 3 MAX. D2 D1 T C D ITEM Carrier width Carrier length SYMBOL A B SPECIFICATIONS (mm) 1.85+0.1 W1 SPECIFICATIONS (inch) 0.073+0.004 3.94+0.1 0.155+0.004 0.062+0.004 Carrier depth C 1.57+0.1 Sprocket hole d 1.5+0.1 0.059+0.004 Reel outside diameter D 178+2.0 7.000+0.079 Reel inner diameter D1 80.0 3.150 Feed hole diameter D2 0.512+0.020 Strocket hole position Punch hole position E F 13.0+0.5 1.75+0.1 3.5+0.1 Punch hole pitch P 4.0+0.1 0.157+0.004 Sprocket hole pitch P0 4.0+0.1 0.157+0.004 Embossment center Overall tape thickness P1 2.0+0.05 T 0.2+0.1 0.079+0.002 0.008+0.004 Tape width W 8.0+0.3 0.315+0.012 Reel width W1 13.0+1.0 0.512+0.039 NOTES: 1. All dimensions above are in millimeters(inches). 2. Devices are packed in accordance with EIA standard RS-481-A and specification shown above. 0.069+0.004 0.138+0.004