PSC04 Series 1 U U LT R A C O M PA C T - T E L E C O M R E C T I F I E R FEATURES • • • • • • • • • • 1000W - 4000W Configurable Battery Charging System 1U 19" Rack Mounting Network Monitoring N+1 Operation System Monitoring Load & Battery MCBs Battery LVD Customized shelf configurations available Fully Featured Telecom Grade Rectifier SPECIFICATIONS INPUT MONITORING & CONTROL AC input 240V AC (90-300V) Single phase Frequency range 45-66 Hz Power factor >0.99 full load Display Communications OUTPUT Nominal voltage 24Vdc, 48Vdc, 60Vdc Output power 4kW @ 48Vdc 2kW @ 24Vdc LED Indicators Polarity Positive earth, (negative earth option available) Audible Controls DC DISTRIBUTION Load Battery Breaker fail detection DC Terminals Low voltage disconnect Standard Shelf configuration. (Customized configuration available)* Standard Shelf configuration (Customized configuration available)* Electronic fail detection on both load and battery breakers Rear connected tunnel terminals PSC04 V1, load and battery 10mm² PSC04 V2 load and battery 6mm² See Shelf configuration System ENVIRONMENTAL Ambient Temperature -20ºC to +70ºC (maximum output power is derated above +50ºC) Storage Temperature -30ºC to +85ºC Humidity 5-95% RH (non-condensing) Altitude <2,500m at full power Signal Inputs Alarms Alarm Contacts Logging Capacity Connections Breaker Fail Detection Multi-lingual alpha numeric backlit display Serial: 1x USB port on front panel for PC interface TCP/IP: Ethernet interface for communication using SNMP protocol and internal web based configurator* Modbus: Supported via TCP/IP* Green: Power on/monitor OK Yellow: Non urgent alarm Red: Urgent alarm 90dBA buzzer mappable to user defined conditions 3x push buttons for parameter setting or viewing on front panel Serial bus for rectifier control and interface to peripheral modules, 6x digital inputs, 2x temperature sensors (one fitted by default) 6x alarm relays, 5x of which can be mapped for customised alarm settings 0.3A 100V volts free changeover contacts Periodic log, 16,384 records (dependant on number of parameters logged) Event log, 16,384 records (dependant on number of parameters logged) Relay outputs, mini combicon to accept 1.5mm² wire USB port, USB mini B Electronic fail detection *TCP/IP and modbus options only available with SM36 supervisory module. MECHANICAL Input AC Termination PSC04 V1: 1 phase, LNE 10mm², tunnel terminals PSC04 V2: 1 phase, LNE 6mm², tunnel terminals Output DC Termination PSC04 V1: 10mm², rear connect tunnel terminals PSC04 V2: 6mm², rear connect tunnel terminals STANDARDS Safety EN60950 Electrostatic Discharge CISPR24 Radiated Radio Frequency CISPR22 Dimensions 482.6mm (standard 19" module), 44.45mm (1U), 350mm, W,H,D AC Harmonics EN61000-3-2 Weight 5kg (excluding rectifier modules) AC Flicker and Fluctuations EN61000-3-3 Shipping Dimensions 540.0mm, 95.0mm, 400.0mm, W,H,D Other Shipping Weight 6.0kg (excluding rectifier modules) CE & RoHS compliant www.powerbox.com.au - 1800 251 380 www.powerbox.co.nz - 0800 104 480 Doc. No. PSC04 Rev.C 18-02-16 PSC04 Series 1 U U LT R A C O M PA C T - T E L E C O M R E C T I F I E R SPECIFICATIONS CONFIGURATION AND OPTIONS Rectifiers RM2048XE: 2.0kW modular rectifier, 230V AC input, 48V DC output, 41.7A maximum output RM2048HE: 2.0kW modular rectifier, 230V AC input, 48V DC output, 41.7A maximum output RM2048/24: 2.0kW modular rectifier, 230V AC input, 48 or 24V DC output, 41.7A maximum output RM1860/48: 1.8kW modular rectifier, 230V AC input, 60 or 48V DC output, 30.0A maximum output Supervisory Modules SM35: standard monitor featuring full temperature compensation, automated and manual battery testing/equalisation SM36: enhanced monitor featuring full temperature compensation, automated and manual battery testing/equalisation with TCP/IP ARBP-1M Metal rectifier blanking panel ASM-ABM24(-24-48-60) Battery condition monitor for 24, 48 or 60V battery strings ASM-AC3P AC mains monitor SELECTION TABLE PART NUMBER MODULAR RECTIFIERS MAX SHELF POWER SUPERVISORY MODULE STANDARD DC DISTRIBUTION SM36 1 x load circuit breaker (6-63A) 1 x battery circuit breaker (max 63A) 80A Magnetically latching battery LVD SM36 3 x load circuit breaker (2-30A) 2 x battery circuit breaker (max 30A) 80A Magnetically latching battery LVD PSC04 V1 2 24, 48 or 60VDC 4.0kW Positive or negative earth PSC04 V2 2 24, 48 or 60VDC 4.0kW Positive or negative earth Note: *System part numbers are dependent on configuration options. For final system part numbers consult our sales staff for configuration advice. TECHNICAL ILLUSTRATIONS www.powerbox.com.au - 1800 251 380 www.powerbox.co.nz - 0800 104 480 Doc. No. PSC04 Rev.C 18-02-16