PSC06 Series 1 0 0 0 - 6 0 0 0 W AT T S 2 U U LT R A C O M PA C T B AT T E R Y C H A R G E R S FEATURES • • • • • • 1000W - 6000W Configurable Battery Charging System 2U 19" Rack Mounting Network Monitoring N+1 Operation Fully Featured Telecom Grade Rectifier SPECIFICATIONS MONITORING & CONTROL INPUT AC input 240V AC (90-300V) Single phase or 415V AC Three phase (shelf type dependant)* Frequency range 45-66 Hz Power factor >0.99 full load Termination Single phase, 6 - 10mm² L, N, E tunnel terminals* Three phase, 6 - 10 mm² L1,L2,L3,N,E terminals * (Single phase by linking line terminals) DC OUTPUTT Nominal voltage 48V (+48V or +24V optional)* Rated system output power 6-8k Watts @ -48V (refer to table) 3-4k Watts @ 24V Positive earth, (negative earth option available)* Polarity Display Multi-lingual alpha numeric backlit display Communications Serial: 1x USB port on front panel for local PC interface TCP/IP: Ethernet interface for communication using SNMP protocol and internal web based configurator* Modbus: Supported via TCP/IP* LED Indicators Green: Power on/monitor OK Yellow: Non urgent alarm Red: Urgent alarm Audible 90dBA buzzer mappable to user defined conditions Controls 3x push buttons for parameter setting or viewing on front panel Signal Inputs Serial bus for rectifier control and interface to peripheral modules 6x digital inputs 2x temperature sensors (one fitted by default) Alarms 6x alarm relays, 5x of which can be mapped for customised alarm settings Alarm Contacts 0.3A 100V volts free changeover contacts Logging Capacity Periodic log, 16,384 records (dependant on number of parameters logged) Event log, 16,384 records (dependant on number of parameters logged) Connections Relay outputs, mini combicon to accept 1.5mm² wire USB port, USB mini B DC DISTRIBUTION Load Battery Standard Shelf configuration. (Customized configuration available)* Standard Shelf configuration (Customized configuration available)* Breaker fail detection Electronic fail detection on both load and battery breakers DC terminals Rear Connect DIN Rail Load Tunnel terminals 6 mm² to 16mm²* Battery Tunnel terminals 35mm²* Low voltage disconnect See Standard Shelf configuration. ENVIRONMENTAL REQUIREMENTS Ambient Temperature -20ºC to +70ºC Storage Temperature -30ºC to +85ºC Humidity 5-95% RH (non-condensing) Altitude <2,500m at full power *TCP/IP and modbus options only available with SM36 supervisory module. CONFIGURATION AND OPTIONS Rectifiers RM2048XE: 2.0kW modular rectifier, 230V AC input, 48V DC output, 41.7A maximum output RM2048HE: 2.0kW modular rectifier, 230V AC input, 48V DC output, 41.7A maximum output RM2048/24: 2.0kW modular rectifier, 230V AC input, 48 or 24V DC output, 41.7A maximum output RM1860/48: 1.8kW modular rectifier, 230V AC input, 60 or 48V DC output, 30.0A maximum output Supervisory Modules SM35: standard monitor featuring full temperature compensation, automated and manual battery testing/equalisation SM36: enhanced monitor featuring full temperature compensation, automated and manual battery testing/equalisation with TCP/IP ARBP-1M Metal rectifier blanking panel ASM-ABM24(-24-48-60) Battery condition monitor for 24, 48 or 60V battery strings ASM-AC3P AC mains monitor MECHANICAL Dimensions W, H, D 482.6mm (19” mount), 89.0mm (2U), 390.0mm Weight 9kg (excluding rectifier modules) Shipping Dimensions W, H, D 540.0mm, 150.0mm, 435.0mm Shipping Weight 10.5kg (excluding rectifier modules) Doc. No. PSC06 Series Rev.C 28-9-15 1 Powering Progress PSC06 Series 1 0 0 0 - 6 0 0 0 W AT T S 2 U U LT R A C O M PA C T B AT T E R Y C H A R G E R S SELECTION TABLE MODEL NUMBER MAX RECTIFIERS MAX SHELF POWER DC DISTRIBUTION PSC06 V1 3 24, 48 or 60VDC 6.0kW Positive or Negative Earth 6 x load circuit breakers (6-63A) 2 x battery circuit breakers (max 63A) 125A magnetically latching battery LVD PSC06 V2 3 24, 48 or 60VDC 6.0kW Positive or Negative Earth 16 x load circuit breakers (2-30A) 2 x battery circuit breakers (max 100A) 125A magnetically latching battery LVD *System part numbers are dependent on configuration options. For final system part numbers consult our sales staff for configuration advice. TECHNICAL ILLUSTRATIONS Doc. No. PSC06 Series Rev.C 28-9-15 www.powerbox.com.au www.powerbox.co.nz 1800 251 380 09 4158 320 2