NEC Express5800/R120g-2M System Configuration Guide Introduction This document contains product and configuration information that will enable you to configure your system. The guide will ensure fast and proper configuration of your NEC Express5800 server. May 17, 2016 Revision 1.1 NEC Corporation SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Contents TECHNICAL SPECIFICATION ........................................................................................ 3 Key Features .......................................................................................................................................... 3 Specification .......................................................................................................................................... 3 EXTERNAL VIEWS ....................................................................................................... 10 Front and Rear Views ......................................................................................................................... 10 Dimensions (mm) ................................................................................................................................ 12 CONFIGURATION DIAGRAM ....................................................................................... 13 Expansion Slots .................................................................................................................................. 14 SERVER CONFIGURATION ......................................................................................... 15 1 2 3 Base Models ................................................................................................................................. 15 Processors and Heat Sink .......................................................................................................... 15 Memory ......................................................................................................................................... 17 3.1 Memory Configuration........................................................................................................ 17 4 Internal Hard Disk Drives ............................................................................................................ 20 4.1 RAID Configuration ............................................................................................................ 20 4.2 Required Components for RAID Configuration ................................................................. 21 4.3 Supported HDD/SDD ......................................................................................................... 23 5 2.5-inch PCIe SSD ........................................................................................................................ 25 5.1 2.5-inch PCIeSSD Installation Kit ...................................................................................... 25 5.2 PCIe SSD ........................................................................................................................... 26 6 Optical Drive ................................................................................................................................. 26 7 Internal RDX Drive ....................................................................................................................... 26 7.1 RDX Configuration ............................................................................................................. 26 8 PCI Riser Card / PCI Card ........................................................................................................... 27 8.1 PCI Riser Card ................................................................................................................... 27 8.2 Full Length PCI Card installation Kit .................................................................................. 27 8.3 Graphics Card Installation Kit ............................................................................................ 27 8.4 Network Interface Controller .............................................................................................. 28 8.5 InfiniBand ........................................................................................................................... 30 8.6 External Storage Controller ............................................................................................... 31 8.7 Serial Port Adapter ............................................................................................................. 31 9 Other Add-in Components .......................................................................................................... 32 9.1 Power Supply Module ........................................................................................................ 32 9.2 Redundant Fan Kit ............................................................................................................. 32 9.3 Trusted Platform Module Kit .............................................................................................. 32 9.4 Internal Flash Memory ....................................................................................................... 32 9.5 High Temperature Support Option ..................................................................................... 33 9.6 Flash FDD .......................................................................................................................... 33 10 Add-on Components .................................................................................................................. 34 10.1 17-inch LCD Console Drawer ............................................................................................ 34 10.2 KVM Switch ........................................................................................................................ 34 10.3 Cable Management Arm .................................................................................................... 35 10.4 Server Management License ............................................................................................. 35 10.5 Medium and Cartridge ....................................................................................................... 35 REFERENCES............................................................................................................... 36 Boot Mode Setting .............................................................................................................................. 36 NEC Corporation Revision 1.1 – May, 2016 2 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Server Management ............................................................................................................................ 37 Endurance of SSD ............................................................................................................................... 38 OS Support Matrix for PCI Cards and Embedded Controllers ....................................................... 39 Supported PCI Cards and Installable Slots ...................................................................................... 40 Copyright Notice and Liability Disclaimer ........................................................................................ 48 REVISION HISTORY ..................................................................................................... 49 Technical Specification Key Features High performance with the latest Intel® Xeon® processor E5-2600 v4 product family Up to 1.5 TB of high speed DDR4 memory High energy efficiency with power capping feature and 80 PLUS® Platinum power supply Full manageability by integrated EXPRESSSCOPE Engine 3 Specification (1 / 4) Model Part Number Processor R120g-2M Type Clock speed Number of Processors Cache Cores and Threads Chipset Memory Type Standard Capacity Maximum Capacity Memory protection Internal Storage Standard Capacity Maximum Capacity Disk Controller RAID Hot Plug Optical Disk Drive Optical Drive Bays 3.5-inch Media Bays Disk Drive Bays NEC Corporation N8100-2420F, N8100-2421F, N8100-2422F, N8100-2423F Intel® Xeon® Intel® Xeon® Intel® Xeon® Intel® Xeon® processor processor processor processor E5-2603 V4 E5-2620 V4 E5-2623 v4 E5-2630 v4 1.70 GHz 2.10 GHz 2.60 GHz 2.20 GHz 1 to 2 15 MB 20 MB 10 MB 25 MB 6C-12T 8C-16T 4C-8T 10C-20T Intel® C612 Chipset DDR4-2400 Registered DIMM (4/8/16/32GB) DDR4-2400 TSV Registered DIMM (64GB) 0 GB 1.5 TB (24 x 64 GB) ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory Sparing 0 GB SAS HDD : 28.8 TB (16 x 1.8 TB) SATA HDD : 32 TB (16 x 2 TB) SAS SSD : 6.4 TB ( 16 x 400 GB) SATA SSD : 25.6 TB ( 16 x 1.6 TB) SATA : 6Gb/s (Integrated) SAS: 12 Gb/s (Optional) SATA : RAID 0/1/5/6/10/50/60 (Optional) SAS : RAID 0/1/5/6/10/50/60 (Optional) Supported Optional 1 1 1 16 Revision 1.1 – May, 2016 3 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Model R120g-2M Expansion Slots Standard Video Controller (VRAM) Resolution / Color Interfaces Server Management Redundant Fan Redundant Power Supply Power Supply Power Consumption (Max. Config, Idling) (Max. Config, Operating) Acoustical Noise Max. Config, Idling (Sound Pressure Max. Config, Operating 5 Level) Dimensions (W x D x H ) Weight (Minimum / Maximum) Temperature, Relative Humidity (non-condensing) Regulatory and Safety Operating Systems 1 2 3 4 5 6 Total: 8 slots available 2 PCIe 3.0 x8 (x8 connector) 2 4 PCIe 3.0 x8 (x8 connector) 1 PCIe 3.0 x8 (x8 connector) flexible LOM slot 1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot * The slot mix changes by installing an optional riser card. Integrated in Server Management Controller (32MB) 3 1600 x 1200 / 16.7M 2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2rear) 5 x USB3.0 (2 x front, 2 x rear, 1 x internal) 3 x USB2.0 (2 x rear, 1 x internal) 1 x Flexible Integrated NIC (4x 1000BASE-T, 2x 10GBASE-T, or 2x 1000BASE-T + 2x 10GBASE-SFP+) 1 x Management LAN connector (1000BASE-T, RJ-45, 1 x rear) EXPRESSSCOPE Engine 3 4 Standard (N+1) , Optional kit for N+N redundancy, hot plug Optional, hot plug 1 to 2 x 460 Watt or 800 Watt or 1000 Watt 80 PLUS® Platinum certified hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz, or 800 Watt 80 PLUS® Titanium certified hot plug PSU 200-240 VAC ± 10% 50 / 60 Hz ± 3 Hz 335 VA / 336 VA / 332 VA / 355 VA / 333 Watt 334 Watt 330 Watt 352 Watt 710 VA / 738 VA / 790 VA / 831 VA / 705 Watt 733 Watt 785 Watt 825 Watt 49.6dB 54.0dB 448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U) 19.7 kg / 32.3 kg, 43.43 lbs. / 71.21 lbs. Operating: 5° to 40° C / 41° to 104° F (Standard) or 5° to 45° C / 41° to 113° F (Optional), 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% FCC, UL, CB, CE, BSMI, UL(Mexico), KC, CCC, RCM, BIS, RoHS, WEEE Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 6 Red Hat Enterprise Linux 6.7 or later (x86_64) 6 Red Hat Enterprise Linux 7.2 or later VMware ESXi™ 5.5 Update 3 VMware ESXi™ 6.0 Update 1 An optional drive cage is required to install more than 8 hard drives. Available only when the second processor is configured. Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Redundant at ambient temperatures up to 35° C. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html NEC Corporation Revision 1.1 – May, 2016 4 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M (2 / 4) Model Part Number Processor R120g-2M Type Clock speed Number of Processors Cache Cores and Threads Chipset Memory Type Standard Capacity Maximum Capacity Memory protection Internal Storage Standard Capacity Maximum Capacity Disk Controller RAID Expansion Slots Video Hot Plug Optical Disk Drive Optical Drive Bays 3.5-inch Media Bays Disk Drive Bays Standard Controller (VRAM) Resolution / Color Interfaces Server Management Redundant Fan Redundant Power Supply Power Supply NEC Corporation N8100-2420F, N8100-2421F, N8100-2422F, N8100-2423F Intel® Xeon® Intel® Xeon® Intel® Xeon® Intel® Xeon® processor processor processor processor E5-2637 V4 E5-2640 V4 E5-2643 v4 E5-2650 v4 3.50 GHz 2.40 GHz 3.40 GHz 2.20 GHz 1 to 2 15 MB 25 MB 20 MB 30 MB 4C-8T 10C-20T 6C-12T 12C-24T Intel® C612 Chipset DDR4-2400 Registered DIMM (4/8/16/32GB) DDR4-2400 TSV Registered DIMM (64GB) 0 GB 1.5 TB (24 x 64 GB) ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory Sparing 0 GB SAS HDD : 28.8 TB (16 x 1.8 TB) SATA HDD : 32 TB (16 x 2 TB) SAS SSD : 6.4 TB ( 16 x 400 GB) SATA SSD : 25.6 TB ( 16 x 1.6 TB) SATA : 6Gb/s (Integrated) SAS: 12 Gb/s (Optional) SATA : RAID 0/1/5/6/10/50/60 (Optional) SAS : RAID 0/1/5/6/10/50/60 (Optional) Supported Optional 1 1 1 16 Total: 8 slots available 2 PCIe 3.0 x8 (x8 connector) 2 4 PCIe 3.0 x8 (x8 connector) 1 PCIe 3.0 x8 (x8 connector) flexible LOM slot 1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot * The slot mix changes by installing an optional riser card. Integrated in Server Management Controller (32MB) 3 1600 x 1200 / 16.7M 2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2rear) 5 x USB3.0 (2 x front, 2 x rear, 1 x internal) 3 x USB2.0 (2 x rear, 1 x internal) 1 x Flexible Integrated NIC (4x 1000BASE-T, 2x 10GBASE-T, or 2x 1000BASE-T + 2x 10GBASE-SFP+) 1 x Management LAN connector (1000BASE-T, RJ-45, 1 x rear) EXPRESSSCOPE Engine 3 4 Standard (N+1) , Optional kit for N+N redundancy, hot plug Optional, hot plug 1 to 2 x 460 Watt or 800 Watt or 1000 Watt 80 PLUS® Platinum certified hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz, or 800 Watt 80 PLUS® Titanium certified hot plug PSU 200-240 VAC ± 10% 50 / 60 Hz ± 3 Hz Revision 1.1 – May, 2016 5 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Model Power Consumption R120g-2M (Max. Config, Idling) (Max. Config, Operating) Acoustical Noise Max. Config, Idling (Sound Pressure Max. Config, Operating 5 Level) Dimensions (W x D x H ) Weight (Minimum / Maximum) Temperature, Relative Humidity (non-condensing) Regulatory and Safety Operating Systems 1 2 3 4 5 6 365 VA / 362 Watt 876 VA / 870 Watt 49.6dB 57.7dB 333 VA / 330 Watt 809 VA / 803 Watt 49.6dB 54.4dB 364 VA / 361 Watt 988 VA / 981 Watt 49.6dB 57.7dB 332 VA / 330 Watt 876 VA / 870 Watt 49.6dB 55.6dB 448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U) 19.7 kg / 32.3 kg, 43.43 lbs. / 71.21 lbs. Operating: 5° to 40° C / 41° to 104° F (Standard) or 5° to 45° C / 41° to 113° F (Optional), 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% FCC, UL, CB, CE, BSMI, UL(Mexico), KC, CCC, RCM, BIS, RoHS, WEEE Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 6 Red Hat Enterprise Linux 6.7 or later (x86_64) 6 Red Hat Enterprise Linux 7.2 or later VMware ESXi™ 5.5 Update 3 VMware ESXi™ 6.0 Update 1 An optional drive cage is required to install more than 8 hard drives. Available only when the second processor is configured. Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Redundant at ambient temperatures up to 35° C. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html (3 / 4) Model Part Number Processor R120g-2M Type Clock speed Number of Processors Cache Cores and Threads Chipset Memory Type Standard Capacity Maximum Capacity Memory protection Internal Storage NEC Corporation Standard Capacity Maximum Capacity N8100-2420F, N8100-2421F, N8100-2422F, N8100-2423F Intel® Xeon® Intel® Xeon® Intel® Xeon® Intel® Xeon® processor processor processor processor E5-2667 V4 E5-2680 V4 E5-2690 v4 E5-2697 v4 3.20 GHz 2.40 GHz 2.60 GHz 2.30 GHz 1 to 2 25 MB 35 MB 45 MB 8C-16T 14C-28T 18C-36T Intel® C612 Chipset DDR4-2400 Registered DIMM (4/8/16/32GB) DDR4-2400 TSV Registered DIMM (64GB) 0 GB 1.5 TB (24 x 64 GB) ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory Sparing 0 GB SAS HDD : 28.8 TB (16 x 1.8 TB) SATA HDD : 32 TB (16 x 2 TB) SAS SSD : 6.4 TB ( 16 x 400 GB) SATA SSD : 25.6 TB ( 16 x 1.6 TB) Revision 1.1 – May, 2016 6 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Model Internal Storage (cont’d) R120g-2M Disk Controller RAID Expansion Slots Video Hot Plug Optical Disk Drive Optical Drive Bays 3.5-inch Media Bays Disk Drive Bays Standard Controller (VRAM) Resolution / Color Interfaces Server Management Redundant Fan Redundant Power Supply Power Supply Power Consumption (Max. Config, Idling) (Max. Config, Operating) Acoustical Noise Max. Config, Idling (Sound Pressure Max. Config, Operating 5 Level) Dimensions (W x D x H ) Weight (Minimum / Maximum) Temperature, Relative Humidity (non-condensing) Regulatory and Safety Operating Systems 1 2 SATA : 6Gb/s (Integrated) SAS: 12 Gb/s (Optional) SATA : RAID 0/1/5/6/10/50/60 (Optional) SAS : RAID 0/1/5/6/10/50/60 (Optional) Supported Optional 1 1 1 16 Total: 8 slots available 2 PCIe 3.0 x8 (x8 connector) 2 4 PCIe 3.0 x8 (x8 connector) 1 PCIe 3.0 x8 (x8 connector) flexible LOM slot 1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot * The slot mix changes by installing an optional riser card. Integrated in Server Management Controller (32MB) 3 1600 x 1200 / 16.7M 2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2rear) 5 x USB3.0 (2 x front, 2 x rear, 1 x internal) 3 x USB2.0 (2 x rear, 1 x internal) 1 x Flexible Integrated NIC (4x 1000BASE-T, 2x 10GBASE-T, or 2x 1000BASE-T + 2x 10GBASE-SFP+) 1 x Management LAN connector (1000BASE-T, RJ-45, 1 x rear) EXPRESSSCOPE Engine 3 4 Standard (N+1) , Optional kit for N+N redundancy, hot plug Optional, hot plug 1 to 2 x 460 Watt or 800 Watt or 1000 Watt 80 PLUS® Platinum certified hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz, or 800 Watt 80 PLUS® Titanium certified hot plug PSU 200-240 VAC ± 10% 50 / 60 Hz ± 3 Hz 362 VA / 336 VA / 362 VA / 368 VA / 360 Watt 334 Watt 360 Watt 365 Watt 984 VA / 963 VA / 987 VA / 994 VA / 977 Watt 957 Watt 980 Watt 987 Watt 49.6dB 49.6dB 49.6dB 49.6dB 57.7dB 56.6dB 57.7dB 58.3dB 448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U) 19.7 kg / 32.3 kg, 43.43 lbs. / 71.21 lbs. Operating: 5° to 40° C / 41° to 104° F (Standard) or 5° to 45° C / 41° to 113° F (Optional), 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% FCC, UL, CB, CE, BSMI, UL(Mexico), KC, CCC, RCM, BIS, RoHS, WEEE Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 6 Red Hat Enterprise Linux 6.7 or later (x86_64) 6 Red Hat Enterprise Linux 7.2 or later VMware ESXi™ 5.5 Update 3 VMware ESXi™ 6.0 Update 1 An optional drive cage is required to install more than 8 hard drives. Available only when the second processor is configured. NEC Corporation Revision 1.1 – May, 2016 7 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 3 4 5 6 Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Redundant at ambient temperatures up to 35° C. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html (4 / 4) Model R120g-2M Part Number Processor N8100-2420F, N8100-2421F, N8100-2422F, N8100-2423F Intel® Xeon® Intel® Xeon® Intel® Xeon® processor processor E5-2698 processor E5-2699 E5-2697A V4 V4 v4 2.60 GHz 2.20 GHz 2.20 GHz 1 to 2 40 MB 50 MB 55 MB 16C-32T 20C-40T 22C-44T Intel® C612 Chipset DDR4-2400 Registered DIMM (4/8/16/32GB) DDR4-2400 TSV Registered DIMM (64GB) 0 GB 1.5 TB (24 x 64 GB) ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory Sparing 0 GB SAS HDD : 28.8 TB (16 x 1.8 TB) SATA HDD : 32 TB (16 x 2 TB) SAS SSD : 6.4 TB ( 16 x 400 GB) SATA SSD : 25.6 TB ( 16 x 1.6 TB) SATA : 6Gb/s (Integrated) SAS: 12 Gb/s (Optional) SATA : RAID 0/1/5/6/10/50/60 (Optional) SAS : RAID 0/1/5/6/10/50/60 (Optional) Supported Optional 1 1 1 16 Total: 8 slots available 2 PCIe 3.0 x8 (x8 connector) 2 4 PCIe 3.0 x8 (x8 connector) 1 PCIe 3.0 x8 (x8 connector) flexible LOM slot 1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot * The slot mix changes by installing an optional riser card. Integrated in Server Management Controller (32MB) 3 1600 x 1200 / 16.7M 2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear) 1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2rear) 5 x USB3.0 (2 x front, 2 x rear, 1 x internal) 3 x USB2.0 (2 x rear, 1 x internal) 1 x Flexible Integrated NIC (4x 1000BASE-T, 2x 10GBASE-T, or 2x 1000BASE-T + 2x 10GBASE-SFP+) 1 x Management LAN connector (1000BASE-T, RJ-45, 1 x rear) EXPRESSSCOPE Engine 3 4 Standard (N+1) , Optional kit for N+N redundancy, hot plug Optional, hot plug Type Clock speed Number of Processors Cache Cores and Threads Chipset Memory Type Standard Capacity Maximum Capacity Memory protection Internal Storage Standard Capacity Maximum Capacity Disk Controller RAID Expansion Slots Video Hot Plug Optical Disk Drive Optical Drive Bays 3.5-inch Media Bays Disk Drive Bays Standard Controller (VRAM) Resolution / Color Interfaces Server Management Redundant Fan Redundant Power Supply NEC Corporation Revision 1.1 – May, 2016 8 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Model R120g-2M Power Supply 1 to 2 x 460 Watt or 800 Watt or 1000 Watt 80 PLUS® Platinum certified hot plug PSU 100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz, or 800 Watt 80 PLUS® Titanium certified hot plug PSU 200-240 VAC ± 10% 50 / 60 Hz ± 3 Hz 364 VA / 364 VA / 364 VA / 362 Watt 362 Watt 362 Watt 996 VA / 996 VA / 996 VA / 989 Watt 989 Watt 989 Watt 49.6dB 49.6dB 49.6dB 58.3dB 57.7dB 58.3dB Power Consumption (Max. Config, Idling) (Max. Config, Operating) Acoustical Noise Max. Config, Idling (Sound Pressure Max. Config, Operating 5 Level) Dimensions (W x D x H ) Weight (Minimum / Maximum) Temperature, Relative Humidity (non-condensing) Regulatory and Safety Operating Systems 1 2 3 4 5 6 448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U) 19.7 kg / 32.3 kg, 43.43 lbs. / 71.21 lbs. Operating: 5° to 40° C / 41° to 104° F (Standard) or 5° to 45° C / 41° to 113° F (Optional), 20 to 80% Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80% FCC, UL, CB, CE, BSMI, UL(Mexico), KC, CCC, RCM, BIS, RoHS, WEEE Microsoft® Windows Server® 2008 R2 Standard Microsoft® Windows Server® 2008 R2 Enterprise Microsoft® Windows Server® 2012 Standard Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 R2 Standard Microsoft® Windows Server® 2012 R2 Datacenter 6 Red Hat Enterprise Linux 6.7 or later (x86_64) 6 Red Hat Enterprise Linux 7.2 or later VMware ESXi™ 5.5 Update 3 VMware ESXi™ 6.0 Update 1 An optional drive cage is required to install more than 8 hard drives. Available only when the second processor is configured. Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors. Redundant at ambient temperatures up to 35° C. Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating environment. For Linux support, contact our sales representative or go to the NEC website at: http://www.nec.com/global/prod/express/linux/index.html NEC Corporation Revision 1.1 – May, 2016 9 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M External Views Front and Rear Views Front View C D E A F H I J K MN O P B G Q L R S Legend A. B. C. D. E. F. G. H. I. J. 2.5-inch Drive Bays 2.5-inch Drive Cage Bay Power Button / Power LED UID LED Button System Reset Button Dump (NMI) Button USB Connectors BMC Reset Button System Status LED 1 System Status LED 2 NEC Corporation K. L. M. N. O. P. Q. R. S. Power Capping LED VGA Connector Data LAN 1 Activity LED Data LAN 2 Activity LED Data LAN 3 Activity LED Data LAN 4 Activity LED Media Bay Optical Drive Bay Pull-out Tab Revision 1.1 – May, 2016 10 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Rear View B A C D E F G H I J K L Legend A. B. C. D. E. F. PCI Slots (Full-Height) PCI Slots (Low-Profile) Power Supply AC Inlet AC Power LED USB Connectors NEC Corporation G. H. I. J. K. L. UID Button/LED Serial Port Connector VGA Connector Management LAN Connector LOM Card Slot Additional Power Supply Slot Revision 1.1 – May, 2016 11 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Dimensions (mm) Without Cable Arm 87.4 32.7 829.0 88.3 735.8 87.2 482.0 448.0 482.6 With Cable Arm 948.4 867.0 NEC Corporation Revision 1.1 – May, 2016 12 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Configuration Diagram NEC Corporation CPU 2 Standard Components PSU 2 LOM #1D #1C PCIe 3.0 RAID Slot 6x DIMM Slots Hot Plug Power Supply 1 PSU 1 Cooling Fan (CPU2) PCI Riser #2C 6x DIMM Slots PCIe 3.0 #3D #2D 2xDIMM 6x DIMM Slots LOM Card #3C Cooling Fan Optical Drive Bay Media Bay Legend: Redundant Cooling Fan 8x 2.5-inch Drives Optical Driver Bay / Media Bay CPU 1 4x Flash Backup Unit Slots 8x 2.5-inch Drives 2.5-inch Hot Plug Drive Cage 2.5-inch Hot Plug Drive Cage Hot Plug Power Supply 2 6x DIMM Slots Mandatory components Revision 1.1 – May, 2016 13 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Expansion Slots Slot #1A Slot #3C Slot #3D Slot #2C Slot #2D Slot #1C Slot #1D Slot #1B Legend Standard Remarks #1A #1B #1C #2C #3C N8116-34/-34A PCIe x16 Riser Card Kit N8116-45 PCIe x4/x16 FH Riser Card Kit #1D #2D #3D #1A #1B #1C #2C #1D #2D #3D #1A #1B #1C #2C #3C N8116-49 PCIe x4/x16 FH/LP Riser Card Kit or N8116-45 PCIe x4/x16 FH Riser Card Kit and N8116-46 PCIe x4/x16 LP Riser Card Kit #1D #2D #3D #1A #1B #1C #2C #3C #1D #2D #3D PCIe 3.0 x8, x8 connector, for a dedicated RAID controller PCIe 3.0 x8, x8 connector, for a dedicated LOM Card PCIe 3.0 x8, x8 connector, Full-height, up to 220 mm length PCIe 3.0 x8, x8 connector, Full-height, up to 220/312 mm length PCIe 3.0 x8, x8 connector, Full-height, up to 220/312 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, for a dedicated RAID controller PCIe 3.0 x8, x8 connector, for a dedicated LOM Card PCIe 3.0 x8, x16 connector, Full-height, up to 220 mm length PCIe 3.0 x16, x16 connector, Full-height, up to 220/312 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, for a dedicated RAID controller PCIe 3.0 x8, x8 connector, for a dedicated LOM Card PCIe 3.0 x4, x8 connector, Full-height, up to 220 mm length PCIe 3.0 x4, x8 connector, Full-height, up to 220/312 mm length PCIe 3.0 x16, x16 connector, Full-height, up to 312 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x8, x8 connector, for a dedicated RAID controller PCIe 3.0 x8, x8 connector, for a dedicated LOM Card PCIe 3.0 x4, x8 connector, Full-height, up to 220 mm length PCIe 3.0 x4, x8 connector, Full-height, up to 220/312 mm length PCIe 3.0 x16, x16 connector, Full-height, up to 312 mm length PCIe 3.0 x4, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x4, x8 connector, Low-profile, up to 220 mm length PCIe 3.0 x16, x16 connector, Low-profile, up to 220 mm length 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required 2CPU required NOTE: Up to 312 mm length card can be installed into slot #2C when N8116-37 Full Length PCI Card installation Kit is installed. The slot #3C is not available when using N8116-34/34A PCIe x16 Riser Card Kit. NEC Corporation Revision 1.1 – May, 2016 14 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Server Configuration 1 Base Models Product Name / Description Part Number NEC Express5800/R120g-2M Server no processor, no RAM, no HDD, no ODD, no LOM Card Including : 1 x 460 Watt 80 PLUS® Platinum Power Supply Unit, Front Bezel, 2.5-inch Drive Cage NEC Express5800/R120g-2M Server no processor, no RAM, no HDD, no ODD, no LOM Card Including : 1 x 800 Watt 80 PLUS® Platinum Power Supply Unit, Front Bezel, 2.5-inch Drive Cage NEC Express5800/R120g-2M Server no processor, no RAM, no HDD, no ODD, no LOM Card Including : 1 x 800 Watt 80 PLUS® Titanium Power Supply Unit, Front Bezel, 2.5-inch Drive Cage NEC Express5800/R120g-2M Server no processor, no RAM, no HDD, no ODD, no LOM Card Including : 1 x 1000 Watt 80 PLUS® Platinum Power Supply Unit, Front Bezel, 2.5-inch Drive Cage N8100-2420F N8100-2421F N8100-2422F N8100-2423F NOTE: The base model must be ordered with a processor kit, a memory kit, and LOM card. Use the NEC Power Supply Selector to select appropriate size for power units. For details, please visit the NEC website at: http://www.nec.com/en/global/prod/express/collateral/tools/PowerSelector_G01.xls 2 Processors and Heat Sink Available sockets: 2 Product Name / Description Part Number Processors 1 Processor Required N8101-1029F NEC Corporation Xeon E5-2603 v4 Processor Kit Intel® Xeon ® Processor E5-2603v4 (1.70 GHz, 6C/6T, 15 MB) Xeon E5-2620 v4 Processor Kit Intel® Xeon ® Processor E5-2620 v4 (2.10 GHz, 8C/16T, 20 MB) Xeon E5-2623 v4 Processor Kit Intel® Xeon ® Processor E5-2623 v4 (2.60 GHz, 4C/8T, 10 MB) Xeon E5-2630 v4 Processor Kit Intel® Xeon ® Processor E5-2630 v4 (2.20 GHz, 10C/20T, 25 MB) Xeon E5-2637 v4 Processor Kit Intel® Xeon ® Processor E5-2637 v4 (3.50 GHz, 4C/8T, 15 MB) Xeon E5-2640 v4 Processor Kit Intel® Xeon ® Processor E5-2640 v4 (2.40 GHz, 10C/20T, 25 MB) Xeon E5-2643 v4 Processor Kit Intel® Xeon ® Processor E5-2643 v4 (3.40 GHz, 6C/12T, 20 MB) Xeon E5-2650 v4 Processor Kit Intel® Xeon ® Processor E5-2650 v4 (2.20 GHz, 12C/24T, 30 MB) Xeon E5-2667 v4 Processor Kit Intel® Xeon ® Processor E5-2667 v4 (3.20 GHz, 8C/16T, 25 MB) Xeon E5-2680 v4 Processor Kit Intel® Xeon ® Processor E5-2680 v4 (2.40 GHz, 14C/28T, 35 MB) Xeon E5-2690 v4 Processor Kit Intel® Xeon ® Processor E5-2690 v4 (2.60 GHz, 14C/28T, 35 MB) Xeon E5-2697 v4 Processor Kit Intel® Xeon ® Processor E5-2697 v4 (2.30 GHz, 18C/36T, 45 MB) Revision 1.1 – May, 2016 N8101-1030F N8101-1031F N8101-1032F N8101-1033F N8101-1034F N8101-1035F N8101-1036F N8101-1038F N8101-1039F N8101-1040F N8101-1041F 15 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Heat Sink 1st 2nd Xeon E5-2697A v4 Processor Kit Intel® Xeon ® Processor E5-2697A v4(2.60 GHz,16C/32T, 40 MB) Xeon E5-2698 v4 Processor Kit Intel® Xeon ® Processor E5-2698 v4 (2.20 GHz, 20C/40T, 50 MB) Xeon E5-2699 v4 Processor Kit Intel® Xeon ® Processor E5-2699 v4 (2.20 GHz, 22C/44T, 55 MB) Processor Heat Sink st For 1 Processor Processor Heat Sink nd For 2 Processor, including cooling fan kit N8101-1042F N8101-1043F N8101-1044F (Standard) N8101-781F NOTE: Minimum one processor kit from above must be installed. The processors must be the same to configure dual processor system. The maximum number of logical processors supported by OS See the table below for the maximum number of logical processors that you can actually use on your system. Number of Logical Processors Supported by Operating Systems Microsoft Windows Server 2008 R2 Standard (x64) Microsoft Windows Server 2008 R2 Enterprise (x64) Microsoft Windows Server 2012 Standard Microsoft Windows Server 2012 Datacenter Microsoft Windows Server 2012 R2 Standard Microsoft Windows Server 2012 R2 Datacenter Red Hat Enterprise Linux 6 (x86_64) Red Hat Enterprise Linux 7 VMware ESXi 5.5 VMware ESXi 6.0 1 Maximum Available Number of logical Processors 256 1 88 640 1 88 240 88 320 480 88 88 The maximum numbers of logical processors when using Hyper-V are below - Windows Server 2008 R2 : 64 - Windows Server 2012, Windows Server 2012 R2 : 320 NEC Corporation Revision 1.1 – May, 2016 16 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 3 Memory 3.1 Memory Configuration Refer to the section in accordance with your operating system and memory configuration: Independent Channel: Refer to 3.1.1 Memory Sparing Configuration: Refer to 3.1.2 Memory Mirroring / Memory Lockstep Configuration: Refer to 3.1.3 Memory Configuration Feature Comparison See the table below for feature comparisons of memory configurations supported. Independent Channel Memory Sparing Memory Lockstep Memory Mirroring Performance Data Protection Best No Better Multiple single bit error protection Better No Redundancy Data Correction Available Memory No ECC, x4 SDDC Full physical memory 4 Partly ECC, x4 SDDC 5/6 physical memory No ECC, x8 SDDC Full physical memory 4 Good Multiple single bit and multi bit error protection Fully ECC, x4 SDDC Half physical memory 4 - All DIMMs in the system must be identical. Paired DIMMs must be identical. Paired DIMMs must be identical. Available Memory Channels Notes 3.1.1 4 Independent Channel Configuration Available slots: 12 per processor Category Product Name / Description Part Number Registered DIMM (RDIMM) 8GB DDR4-2400 REG Memory Kit (2x4GB) 2 x 4GB Registered ECC DIMM, DDR4-2400(PC4-2400) 16GB DDR4-2400 REG Memory Kit (2x8GB) 2 x 8GB Registered ECC DIMM, DDR4-2400(PC4-2400) 32GB DDR4-2400 REG Memory Kit (2x16GB) 2 x 16GB Registered ECC DIMM, DDR4-2400(PC4-2400) 64GB DDR4-2400 REG Memory Kit (2x32GB) 2 x 32GB Registered ECC DIMM, DDR4-2400(PC4-2400) 128GB DDR4-2400 TSV REG Memory Kit (2x64GB) 2 x 64GB Registered ECC DIMM, DDR4-2400(PC4-2400) N8102-663F N8102-664F N8102-665F N8102-666F N8102-667F NOTE: Minimum one memory kit per processor must be installed. It is recommended to install memory kits in multiples of two (four identical DIMMs) for quad-channel symmetric memory configurations to increase memory transfer speed. When two processors are installed, balance the DIMMs across the two processors. Mix configurations of 128GB memory kit and 8GB/16GB/32GB/64GB memory kit are not supported. NEC Corporation Revision 1.1 – May, 2016 17 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 3.1.2 Memory Sparing Configuration Available slots: 12 per processor Product Name / Description Part Number 24GB DDR4-2400 REG Memory Kit (3x8GB) 3 x 8GB Registered ECC DIMM, DDR4-2400(PC4-2400) 48GB DDR4-2400 REG Memory Kit (3x16GB) 3 x 16GB Registered ECC DIMM, DDR4-2400(PC4-2400) N8102-672 N8102-673 NOTE: Minimum one memory kit per processor must be installed. The configured memories must be identical. When two processors are installed, balance the DIMMs across the two processors. The logical memory capacity at the time of memory sparing becomes five-sixthes of physical capacity with configurations less than DIMM The maximum memory speed is 1866 MHz. 3.1.3 Memory Mirroring / Memory Lockstep Configuration Available slots: 12 per processor Product Name / Description Part Number 16GB DDR4-2400 REG Memory Kit (2x8GB) 2 x 8GB Registered ECC DIMM, DDR4-2400(PC4-2400) 32GB DDR4-2400 REG Memory Kit (2x16GB) 2 x 16GB Registered ECC DIMM, DDR4-2400(PC4-2400) N8102-669 N8102-670 NOTE: Minimum one memory kit per processor must be installed. NEC Corporation Revision 1.1 – May, 2016 18 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Maximum Memory Speed See the table below for the actual maximum memory transfer speed in Independent Channel / Memory Sparing Configuration. DDR4 memory speed depends on the type of DIMMs, the native memory bus speed of the memory controller and memory configuration. All memory buses operate at the clock frequency of the DIMM with the lowest frequency. The maximum memory speed is 1866 MHz with Memory Sparing Configuration. Processor Type E5-2603 v4 E5-2620 v4 E5-2623 v4 E5-2630 v4 E5-2640 v4 E5-2637 v4 E5-2643 v4 E5-2650 v4 E5-2667 v4 E5-2680 v4 E5-2690 v4 E5-2697 v4 E5-2697A v4 E5-2698 v4 E5-2699 v4 Populated DIMMs # of DIMMs per processor DIMM Speed RDIMM: 4, 8, 16, 32, 64GB - 1866 MHz Memory Sparing RDIMM: 4, 8, 16, 32, 64GB Up to 8 DIMMs 10 or more DIMMs - 1866 MHz 2133 MHz 1866 MHz 1866 MHz Up to 8 DIMMs 10 or more DIMMs - 2400 MHz 1866 MHz 1866 MHz Memory Sparing RDIMM: 4, 8, 16, 32, 64GB Memory Sparing Maximum Available Memory See the table below for the maximum memory size that you can actually use on your system. Maximum Memory Size Supported by Operating Systems 1 Microsoft Windows Server 2008 R2 Standard 1 Microsoft Windows Server 2008 R2 Enterprise 1 Microsoft Windows Server 2012 Standard 1 Microsoft Windows Server 2012 Datacenter 1 Microsoft Windows Server 2012 R2 Standard 1 Microsoft Windows Server 2012 R2 Datacenter Red Hat Enterprise Linux 6 (x86_64) Red Hat Enterprise Linux 7 2 VMware ESXi 5.5 3 VMware ESXi 6.0 1 2 3 Maximum Available Memory 32 GB 2 TB 4 TB 32 GB 1.5 TB 1.5 TB 6TB 1.5 TB 4 TB 6 TB 1.5 TB 1.5 TB The maximum available memory size of Hyper-V systems are below: - Windows Server 2008 R2 Standard : 32 GB - Windows Server 2008 R2 Enterprise : 1TB - Windows Server 2012, Windows Server 2012 R2:4 TB Up to 1TB of main memory is available to each virtual machine. Up to 4TB of main memory is available to each virtual machine. NEC Corporation Revision 1.1 – May, 2016 19 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 4 Internal Hard Disk Drives 4.1 RAID Configuration Refer to the section in accordance with your OS and RAID configuration. For example, when you would like to configure RAID 0/1/10 1GB cache with Windows Server 2012 R2, refer to the section 4.2.2 for the required components and then refer to the section 4.3.2 for the hard drives. Operating System Supported RAID configuration RAID and Cache Section Supported HDD/SSD Windows Server 2008 R2 VMware ESXi 5.5u3 VMware ESXi 6.0u1 KVM in Red Hat Enterprise Linux 6 (x86_64) Non-RAID (Embedded SATA) RAID 0/1/10 1GB Cache 4.2.1 4.3.1 4.2.2 4.3.2 RAID 5/6/50/60 RAID 5/6/50/60 1GB Cache 2GB Cache 4.2.3 Windows Server 2012 Windows Server 2012 R2 Red Hat Enterprise Linux 6 (x86_64) without KVM feature Red Hat Enterprise Linux 7 Non-RAID (Embedde SATA) RAID 0/1/10 1GB Cache 4.2.1 4.3.1 4.2.2 4.3.3 RAID 5/6/50/60 RAID 5/6/50/60 4.2.3 1GB Cache 2GB Cache 4.2.4 4.2.4 NOTE: Up to four hard drives can be installed in the Embedded SATA configuration. All drives within a RAID array should be of the same type, capacity and rotation speed. Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SAS SSDs, SATA SSDs (ME) and SATA SSDs (VE) can be mixed in each drive cage. It is recommended to set RAID array configuration drives less than eight per disk group in order to minimize the risk of becoming multiple hard drives failure. To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process. NEC Corporation Revision 1.1 – May, 2016 20 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 4.2 Required Components for RAID Configuration 4.2.1 Up to four Drives with Embedded SATA Controller Category Product Name / Description Part Number Storage Controller Embedded SATA Controller 4 x 6Gb/s SATA Internal SATA Cable 1 x mini-SAS HD to 1 x mini-SAS HD 2.5-inch Drive Cage 8 x 2.5-inch Hot-plug hard drive bays (Standard) Cable Drive Cage (Standard) (Standard) NOTE: Up to 4 SATA drives are supported. For supported HDD/SSD, refer to 4.3.1 Hot plug insertion/removal are not supported in the configuration. 4.2.2 RAID 0/1 Controller with 1 GB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1) LSI MegaRAID SAS 9362-8i RAID 0/1/10, 1GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA 6Gb/s Flash Backup Unit for LSI MegaRAID SAS 9362-8i 650mm Cable for Flash Backup Unit included Internal SAS/SATA Cable 1 x Mini SAS HD to 1 x Mini SAS HD, 2 sets 2.5-inch Drive Cage 8 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage 8 x 2.5-inch hot plug drive bays Including six sets of 1 x Mini SAS HD to 1 x Mini SAS HD cable, SAS expander card N8103-176 Flash Backup Recommended Cable Drive Cage Optional Drive Cage (Required when more than 8 drives) N8103-181 (Standard) (Standard) N8154-69 NOTE: For Supported HDD/SSD, refer to 4.3.2 for Windows Server 2008R2, Red Hat Enterprise Linux 6(x86_64) with KVM feature, or VMware. Refet to 4.3.3 for Windows Server 2012/2012R2, Red Hat Enterprise Linux 6(x86_64) without KVM feature, or Red Hat Enterprise Linux 7. All drives within a RAID array should be of the same type, capacity and rotation speed. Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SAS SSDs, SATA SSDs (ME) and SATA SSDs (VE) can be mixed in each drive cage. NEC Corporation Revision 1.1 – May, 2016 21 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 4.2.3 RAID 5/6 Controller with 1 GB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (1GB, RAID 0/1/5/6) LSI MegaRAID SAS 9362-8i RAID0/1/5/6/10/50/60, 1GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA 6Gb/s Flash Backup Unit for LSI MegaRAID SAS 9362-8i 650mm Cable for Flash Backup Unit included Internal SAS/SATA Cable 1 x Mini SAS HD to 1 x Mini SAS HD, 2 sets 2.5-inch Drive Cage 8 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage 8 x 2.5-inch hot plug drive bays Including six sets of 1 x Mini SAS HD to 1 x Mini SAS HD cable, SAS expander card N8103-177 Flash Backup Recommended Cable Drive Cage Optional Drive Cage (Required when more than 8 drives) N8103-181 (Standard) (Standard) N8154-69 NOTE: For Supported HDD/SSD, refer to 4.3.2 for Windows Server 2008R2, Red Hat Enterprise Linux 6(x86_64) with KVM feature, or VMware. Refet to 4.3.3 for Windows Server 2012/2012R2, Red Hat Enterprise Linux 6(x86_64) without KVM feature, or Red Hat Enterprise Linux 7. All drives within a RAID array should be of the same type, capacity and rotation speed. Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SAS SSDs, SATA SSDs (ME) and SATA SSDs (VE) can be mixed in each drive cage. 4.2.4 RAID 5/6 Controller with 2 GB Cache Category Product Name / Description Part Number Storage Controller Required RAID Controller (2GB, RAID 0/1/5/6) LSI MegaRAID SAS 9362-8i RAID0/1/5/6/10/50/60, 2GB, Int. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA 6Gb/s Flash Backup Unit for LSI MegaRAID SAS 9362-8i 650mm Cable for Flash Backup Unit included Internal SAS/SATA Cable 1 x Mini SAS HD to 1 x Mini SAS HD, 2 sets 2.5-inch Drive Cage 8 x 2.5-inch hot plug drive bays 2.5-inch Drive Cage 8 x 2.5-inch hot plug drive bays Including six sets of 1 x Mini SAS HD to 1 x Mini SAS HD cable, SAS expander card N8103-178 Flash Backup Recommended Cable Drive Cage Optional Drive Cage (Required when more than 8 drives) N8103-181 (Standard) (Standard) N8154-69 NOTE: For Supported HDD/SSD, refer to 4.3.2 for Windows Server 2008R2, Red Hat Enterprise Linux 6(x86_64) with KVM feature, or VMware. Refet to 4.3.3 for Windows Server 2012/2012R2, Red Hat Enterprise Linux 6(x86_64) without KVM feature, or Red Hat Enterprise Linux 7. All drives within a RAID array should be of the same type, capacity and rotation speed. Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SAS SSDs, SATA SSDs (ME) and SATA SSDs (VE) can be mixed in each drive cage. NEC Corporation Revision 1.1 – May, 2016 22 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 4.3 Supported HDD/SDD 4.3.1 For Embedded SATA Controller Category Drive 4 slots available 4.3.2 SATA HDD (512n) Product Name / Description Part Number 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 2TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 2 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector N8150-488 N8150-489 N8150-527 For RAID Controller Configuration (1) For Windows Server 2008R2, KVM in Red Hat Enterprise Linux 6(x86_64), or VMware Category Drive Standard : 8 slots available Max : 16 slots available SAS HDD (512n) SATA HDD (512n) SAS SSD (ME) NEC Corporation Product Name / Description Part Number 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1 x 1.2TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 2TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 2 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 200GB Hot Plug 2.5-inch SAS SSD 1 x 200 GB SAS SSD, eMLC, 2.5-inch, 12Gb/s, 512n sector 400GB Hot Plug 2.5-inch SAS SSD 1 x 400 GB SAS SSD, eMLC, 2.5-inch, 12Gb/s, 512n sector N8150-479 Revision 1.1 – May, 2016 N8150-480 N8150-481 N8150-482 N8150-483 N8150-485 N8150-486 N8150-518 N8150-488 N8150-489 N8150-527 N8150-721 N8150-722 23 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M SATA SSD (ME) SATA SSD (VE) 200GB Hot Plug 2.5-inch SATA SSD 1 x 200 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME 400GB Hot Plug 2.5-inch SATA SSD 1 x 400 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME 800GB Hot Plug 2.5-inch SATA SSD 1 x 800 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME 200GB Hot Plug 2.5-inch SATA SSD 1 x 200 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE 400GB Hot Plug 2.5-inch SATA SSD 1 x 400 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE 800GB Hot Plug 2.5-inch SATA SSD 1 x 800 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE 1.6TB Hot Plug 2.5-inch SATA SSD 1 x 1.6 TB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE N8150-725 N8150-726 N8150-727 N8150-732 N8150-733 N8150-734 N8150-735 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SAS SSDs, SATA SSDs (ME) and SATA SSDs (VE) can be mixed in each drive cage. For monitoring SATA SSD life on VMware, NEC ESMPRO Manager Ver.6.05 or later is required. Please download the latest version on the NEC web site. The 2.5-inch SAS/SATA SSDs have limited lifetime. Refer to Endurance of SSD for details. 4.3.3 For RAID Controller Configuration (2) For Windows Server 2012/2012R2, Red Hat Enterprise Linux 6(x86_64) without KVM, or Red Hat Enterprise Linux 7 Category Drive Standard : 8 slots available Max : 16 slots available SAS HDD (512n) SAS HDD (4Kn) SATA HDD (512n) NEC Corporation Product Name / Description Part Number 300GB 10K Hot Plug 2.5-inch SAS HDD 1 x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 450GB 10K Hot Plug 2.5-inch SAS HDD 1 x 450 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 600GB 10K Hot Plug 2.5-inch SAS HDD 1 x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 900GB 10K Hot Plug 2.5-inch SAS HDD 1x 900 GB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 1.2TB 10K Hot Plug 2.5-inch SAS HDD 1 x 1.2TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 512n sector 300GB 15K Hot Plug 2.5-inch SAS HDD 1x 300 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector 450GB 15K Hot Plug 2.5-inch SAS HDD 1x 450 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector 600GB 15K Hot Plug 2.5-inch SAS HDD 1x 600 GB SAS HDD, 2.5-inch, 12Gb/s, 15,000 rpm, 512n sector 1.8TB 10K Hot Plug 2.5-inch SAS HDD 1x 1.8TB SAS HDD, 2.5-inch, 12Gb/s, 10,000 rpm, 4Kn sector N8150-479 500GB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector N8150-488 Revision 1.1 – May, 2016 N8150-480 N8150-481 N8150-482 N8150-483 N8150-485 N8150-486 N8150-518 N8150-490 24 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M SAS SSD (ME) SATA SSD (ME) SATA SSD (VE) 1TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 2TB 7.2K Hot Plug 2.5-inch SATA HDD 1 x 2 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm, 512n sector 200GB Hot Plug 2.5-inch SAS SSD 1 x 200 GB SAS SSD, eMLC, 2.5-inch, 12Gb/s, 512n sector 400GB Hot Plug 2.5-inch SAS SSD 1 x 400 GB SAS SSD, eMLC, 2.5-inch, 12Gb/s, 512n sector 200GB Hot Plug 2.5-inch SATA SSD 1 x 200 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME 400GB Hot Plug 2.5-inch SATA SSD 1 x 400 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME 800GB Hot Plug 2.5-inch SATA SSD 1 x 800 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, ME 200GB Hot Plug 2.5-inch SATA SSD 1 x 200 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE 400GB Hot Plug 2.5-inch SATA SSD 1 x 400 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE 800GB Hot Plug 2.5-inch SATA SSD 1 x 800 GB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE 1.6TB Hot Plug 2.5-inch SATA SSD 1 x 1.6 TB SATA SSD, MLC, 2.5-inch, 6b/s, 512n sector, VE N8150-489 N8150-527 N8150-721 N8150-722 N8150-725 N8150-726 N8150-727 N8150-732 N8150-733 N8150-734 N8150-735 NOTE: All drives within a RAID array should be of the same type, capacity and rotation speed. Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs, SAS SSDs, SATA SSDs (ME) and SATA SSDs (VE) can be mixed in each drive cage. The 4Kn sector drives are make-to-order products. Please consult your sales representative in regard to production lead time. When you select 4Kn sector HDD, confirm whether your applications support hard drives with 4Kn sector size. For more information, visit the NEC website at: http://www.nec.com/en/global/prod/express/svropt/hdd/collateral/4KHDD_Precautions_EN.pdf 512n sector HDD and 4Kn sector HDD cannot be mixed. The 2.5-inch SAS/SATA SSDs have limited lifetime. Refer to Endurance of SSD for details. 5 2.5-inch PCIe SSD 5.1 2.5-inch PCIeSSD Installation Kit Product Name / Description Part Number 2.5-inch PCIeSSD Installation Kit 2.5-inch Drive Cage for 4 x SDDs, PCIe SSD switch card, and PCIe cable N8118-301 NOTE: One PCIe slot is required to install the PCIe SSD switch card. 2.5-inch Additional HDD Cage Bay is used to install 2.5-inch PCIeSSDs. Therefore, the 2.5-inch Drive Cage N8154-69 cannot be installed at the same time. Four PCIe SSDs can be installed The PCIe SSD slots do not support hot-plug. RAID configuration of PCIe SSDs is not supported. Operating system cannot be installed on any PCIe SSD. NEC Corporation Revision 1.1 – May, 2016 25 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 5.2 PCIe SSD Category Product Name / Description Part Number PCIe SSD 4 slots available 800GB Non-Hot Plug 2.5-inch PCIe SSD - 1x 800 GB PCIe SSD, 2.5-inch N8118-500 NOTE: 2.5-inch PCIeSSD Installation Kit is required to install this product. Warranty period is 3 years (36 months) or until the total bytes of written value (TBW) exceeds the limit value, whichever occurs first. It is recommended to check the TBW periodically. Operating system cannot be installed on any PCIe SSD. 6 Optical Drive Category Product Name / Description Part Number Internal 1 slot available Internal Slim DVD-ROM drive Slim DVD-ROM drive DVD read speed: 8x (DVD-ROM / DVD-R / DVD-RW) CD read speed: 24x (CD-ROM / CD-R/RW) Internal DVD Super Multi Drive Slim DVD Super Multi drive, not including writing software DVD Read speed: 8x (DVD-R / DVD-RW / DVD-R DL / DVD+R / DVD+RW / DVD+R DL / DVD-ROM) DVD-RAM read speed: 5x CD read speed: 24x (CD-ROM / CD-R/RW) External DVD Super MULTI Drive USB, Slim DVD Super Multi drive, not including writing software DVD Read speed: 8x (DVD-R / DVD-RW / DVD-R DL / DVD+R / DVD+RW / DVD+R DL / DVD-ROM) DVD-RAM read speed: 5x CD read speed: 24x (CD-ROM / CD-R/RW) N8151-134 External N8151-135F N8160-97F NOTE: Up to 1 optical drive can be connected. 7 Internal RDX Drive 7.1 RDX Configuration Category Product Name / Description Part Number Controller Internal USB Controller 1 x USB port Internal USB cable 1 x Internal USB to 1 x USB device, USB 3.0 (Standard) Internal RDX (USB) N8151-125 Cable Drive 1 bay available NEC Corporation Revision 1.1 – May, 2016 K410-275(00) 26 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 8 PCI Riser Card / PCI Card Please refer to Supported PCI Cards and Installable Slots with regard to the position of PCI slot which can mount PCI card supported. 8.1 PCI Riser Card Product Name / Description Part Number PCIe Riser Card Kit 8 x PCIe 3.0 x8 PCIe x16 Riser Card Kit 1 x PCIe 3.0 x16, 6x PCIe 3.0 x8, auxiliary power connector (8pin) PCIe x16 Riser Card Kit 1 x PCIe 3.0 x16, 6x PCIe 3.0 x8, auxiliary power connector (8+6pin) PCIe x4/x16 FH Riser Card Kit set 1x PCIe 3.0 x16, 5x PCIe 3.0 x8, 2x PCIe 3.0 x4 For PCI Slot C PCIe x4/x16 LP Riser Card Kit set 2x PCIe 3.0 x16, 2x PCIe 3.0 x8, 4x PCIe 3.0 x4 For PCI Slot D NOTE: - N8116-45 is required to use this option. PCIe x4/x16 FH/LP Riser Card Kit set - 2x PCIe 3.0 x16, 2x PCIe 3.0 x8, 4x PCIe 3.0 x4 For PCI Slot C, Slot D (Standard) N8116-34 N8116-34A N8116-45 N8116-46 N8116-49 NOTE: PCI Slot #2C, #3C, #2D, #3D are support in dual processor configurations only. PCI Slot #3C is not available when N8116-34/-34A Riser Card(PCIex16) is installed. PCI Slot #3C, #3D of N8116-49 are support in dual processor configurations only. N8116-45 and N8116-46 will be available in June, 2016. 8.2 Full Length PCI Card installation Kit For a full-length PCI card (D=312mm/12.28 in) installation in PCI Slot #2C Product Name / Description Part Number Full Length PCI Card installation Kit For a full-length installation, contains special heat sinks N8116-37 NOTE: Since this product is make-to-order manufacturing, the support is provided individually. Contact your sales representative for details. 8.3 Graphics Card Installation Kit For GPU card installation Product Name / Description Part Number Graphics Card Installation Kit Power cables for video card (6+2pin) , a retainer to secure the graphics board NOTE: - N8116-34, N8116-37, and two processors are required to use this option. N8116-38 Graphics Card Installation Kit Power cables for video card (6+2pin, 6pin) , two retainers to secure the graphics board NOTE: - N8116-34A, N8116-37, and two processors are required to use this option. N8116-38A NEC Corporation Revision 1.1 – May, 2016 27 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Graphics Card Installation Kit Power cables for video card (8pin), a retainer to secure the graphics board, heat sink and air duct included NOTE: - This option is applicable to N8100-2423F (1000W power supply model) only. - N8116-34/34A, two processors, and N8181-125 are required to use this option. N8116-47 NOTE: Since this product is make-to-order manufacturing, the support is provided individually. Contact your sales representative for details. This product does not support/guarantee installation of general video cards on R120g-2M. Please consult with your sales representative for the tested GPU cards. 8.4 Network Interface Controller Category LOM card Required 1GbE 10GbE Adapter 1GbE 10GbE NEC Corporation Product Name / Description Part Number Quad Port 1000BASE-T LOM Card Broadcom® BCM5719 PCIe 2.0 x4 Dual Port 10GBASE-T LOM Card Intel® Ethernet Controller X540 PCIe 2.0 x8 Dual Port 10GBASE-T LOM Card Intel Ethernet Controller X550 PCIe 3.0(x8) NOTE: - Available in June, 2016 Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card Qlogic NetXtreme II BCM57800S PCIe 2.0 x8 NOTE: - N8104-129 SFP+ Module is required to connect with an optical cable. - Up to two SFP+ Modules can be installed. N8104-154F 1000BASE-T Adapter Broadcom ® BCM5718 Gigabit Ethernet Controller PCIe 2.0 x1 Dual Port 1000BASE-T Adapter Broadcom ® BCM5718 Gigabit Ethernet Controller PCIe 2.0 x1 Dual Port 1000BASE-T Adapter Intel® 82580 Gigabit Ethernet Controller PCIe 2.0 x4 NOTE: - PXE boot is not supported on UEFI environment. Quad Port 1000BASE-T Adapter Broadcom ® BCM5719 Gigabit Ethernet Controller PCIe 2.0 x4 NOTE: - Network cables with RJ-45 plug covers cannot be used. N8104-150 Dual Port 10GBASE SFP+ Adapter (SFP+/2ch) Intel® 82599ES 10 Gigabit Ethernet Controller PCIe 2.0 x8, Low Profile / Full Height NOTE: - N8104-129 SFP+ Module is required to connect with an optical cable. - Up to 2 SFP+ Modules can be installed. N8104-148 Revision 1.1 – May, 2016 N8104-155F N8104-160F N8104-156F N8104-151 N8104-145 N8104-152 28 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M SPF+ Module 10GBASE SFP+ Adapter (SFP+/2ch) Qlogic NetXtreme II BCM57810S PCIe 2.0 x8, Low Profile / Full Height NOTE: - N8104-129 SFP+ Module is required to connect with an optical cable. Dual Port 10GBASE-T Adapter Intel® Ethernet Controller X540 PCIe 2.0(x8) , Low Profile / Full Height Dual Port 10GBASE-T Adapter Intel® Ethernet Controller X550 PCIe 3.0 x4, Low Profile / Full Height SFP+ Module (10G-SR) 1 x SFP+ Module for N8104-148, N8104-149, and N8104-156F N8104-149 N8104-153 N8104-157 N8104-129 NOTE: Supports up to three 10GbE network adapters in a single-processor configuration, and up to five in a dual-processor configuration. Network performance may be reduced depending on the applications and memory performance when three or more 10Gb Network Adapters are installed. For VMware ESXi 5.5 and ESXi 6.0, there are some limitations concerning the number of installable PCI cards. Refer to Supported PCI Cards and Installable Slots for details. NIC Teaming feature – NIC Teaming and bonding features See the table below for supported network interfaces and OS combinations. Windows Server 2008 R2 supports BASP (Broadcom Advanced Server Program) or Intel PROSet teaming while Windows Server 2012 (and later) and Linux support teaming with bonding function supported by OS. Network Interface Team Operating Systems 1GbE NIC N8104-150/-151/-152/-154F/-156F Up to four ports per one team 1GbE NIC N8104-145 10GbE NIC N8104-149/-156F Up to four ports per one team Windows Server 2008 R2 Windows Server 2012 Windows Server 2012 R2 Red Hat Enterprise Linux Windows Server 2008 R2 10GbE NIC N8104-148 10GbE NIC N8104-153/-155F/-157/-160F Up to four ports per one team Up to four ports per one team Up to four ports per one team Windows Server 2008 R2 Windows Server 2012 Windows Server 2012 R2 Red Hat Enterprise Linux Red Hat Enterprise Linux 7.2 or later Windows Server 2012 Windows Server 2012 R2 Red Hat Enterprise Linux NOTE: NIC Teaming feature is not supported on iSCSI interfaces. The network interfaces for each teaming must be the same. When 10GbE and 1GbE NIC teams are mixed, the maximum number of teams must be as follows: - Windows Server 2008 R2 : up to four per one system - Windows Server 2012, Windows Server 2012 R2 : up to five per one system - Red Hat Enterprise Linux : up to five per one system NEC Corporation Revision 1.1 – May, 2016 29 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Using iSCSI See the table below for supported network interfaces and operating system combinations. Category Network Interface Operating Systems 1GbE N8104-150/-151/-152/-154F/-156F 10GbE N8104-145 N8104-149/-156F Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Red Hat Enterprise Linux, VMware Windows Server 2008 R2, VMware Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Red Hat Enterprise Linux, VMware Red Hat Enterprise Linux 7.2 or later Windows Server 2012, Windows Server 2012 R2 Red Hat Enterprise Linux, VMware Windows Server 2012, Windows Server 2012 R2 Red Hat Enterprise Linux N8104-148 N8104-153/-155F N8104-157 NOTE: NIC Teaming feature is not supported on iSCSI interfaces. 8.5 InfiniBand Category Product Name / Description Part Number Controller Single Port InfiniBand Adapter Mellanox ConnectX-3 VPI, MCX353A-FCBT, FDR, PCIe 3.0(x8) Dual Port InfiniBand Adapter Mellanox ConnectX-3 VPI, MCX354A-FCBT, FDR, PCIe 3.0(x8) InfiniBand Cable 2m/FRD Copper InfiniBand Cable 3m/FDR Copper InfiniBand Switch 36 ports/FDR Mellanox MSX6036F-1SFR 36 ports, FDR, One power supply module included, no power cord Redundant Power Supply Unit Power supply module for 36 ports InfiniBand switch, no power cord N8104-146 Cable Switch Unit Power Supply N8104-147 K410-304(02) K410-304(03) NE3707-061 NE3707-063 NOTE: Up to two InfiniBand adapters can be installed into the system and two adapters should be of the same type. The InfiniBand adapters and other options are make-to-order products. Please consult your sales representative in regards to production lead time. NEC Corporation Revision 1.1 – May, 2016 30 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 8.6 External Storage Controller 8.6.1 RAID Controller Category Product Name / Description Part Number Controller RAID Controller (2GB, RAID0/1/5/6) LSI MegaRAID SAS 9380-8e RAID0/1/5/6/10/50/60, 2GB, Ext. 8, PCIe 3.0 x8, SAS 12Gb/s, SATA 6Gb/s, Flash cache protection modules included N8103-179 NOTE: To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process. It is recommended to set RAID array configuration drives less than eight in order to minimize the risk of becoming multiple hard drives failure. For VMware ESXi 5.5 and ESXi 6.0, there are some limitations concerning the number of installable PCI cards. Refer to Supported PCI Cards and Installable Slots for details. 8.6.2 Fibre Channel / SAS Controller Category Product Name / Description Part Number Fibre Channel Fibre Channel Controller (1ch) Emulex LightPulse LPe1250-F8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0 x8 Fibre Channel Controller (2ch) Emulex LightPulse LPe12002-M8 Host Bus Adapter 8Gb/s, Optical, PCIe 2.0 x8 Fibre Channel Controller (1ch) Emulex LightPulse LPe16000B-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0 x8 Fibre Channel Controller (2ch) Emulex LightPulse LPe16002B-M6 Host Bus Adapter 16Gb/s, Optical, PCIe 3.0 x8 SAS Controller LSI SAS9212-4i4e Host Bus Adapter 6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8 SAS Controller LSI SAS9300-8e Host Bus Adapter 12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0 x8 N8190-159 SAS N8190-160 N8190-157A N8190-158A N8103-142 N8103-184 NOTE: Up to four 16Gb/s Fiber Channel Controllers can be installed. However, up to two ports in a single processor configuration with Xeon E5-2603 v4, and up to six ports in a dual processor configuration with Xeon E5-2603 v4 Up to three SAS Controllers can be installed. For VMware ESXi 5.5 and ESXi 6.0, there are some limitations concerning the number of installable PCI cards. Refer to Supported PCI Cards and Installable Slots for details. 8.7 Serial Port Adapter Product Name / Description Part Number Serial Port Adapter Serial port fixed to PCI bracket N8117-01A NOTE: Up to one Serial Port Adapter can be installed. NEC Corporation Revision 1.1 – May, 2016 31 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 9 Other Add-in Components 9.1 Power Supply Module Product Name / Description Part Number 460W Hot Plug Power Supply 1 x 460 Watt 80 PLUS® Platinum 800W Hot Plug Power Supply 1 x 800 Watt 80 PLUS® Platinum 1000W Hot Plug Power Supply 1 x 1000 Watt 80 PLUS® Platinum 800W Hot Plug Power Supply 1 x 800 Watt 80 PLUS® Titanium - NOTE: 200 VAC input only supported N8181-121F N8181-122F N8181-123F N8181-118F NOTE: The power units must be the same to configure redundancy. 9.2 Redundant Fan Kit Product Name / Description Part Number Redundant Fan Kit 4(1CPU), 5(2CPU) hot plug redundant cooling fans for R120g-2M Redundant Fan Kit 5(1CPU), 10(2CPU) hot plug redundant cooling fans for R120g-2M (Standard) N8181-125 NOTE: In a 35 degrees C environment, the fans are N+1 redundant as standard, but CPU and/or memory throttling may occur when a fan is broken. For 40 degrees C environment or full redundancy, arrange N8181-125 redundant fan kit. 9.3 Trusted Platform Module Kit Product Name / Description Part Number Trusted Platform Module Kit TPM 2.0 module N8115-26 NOTE: The kit is not available in China. The kit is not removable after attachment. "TPM Support" in BIOS setup menu must be activated prior to use of this kit. To use Windows BitLocker drive encryption, be sure to keep the "recovery password" of BitLocker function. The recovery password is required to restore data for hardware replacement during a system error. 9.4 Internal Flash Memory Product Name / Description Part Number VMware ESXi support kit Internal USB flash memory to install VMware ESXi system N8106-009 NOTE: The kit does not include VMware ESXi installation media and license. NEC Corporation Revision 1.1 – May, 2016 32 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 9.5 High Temperature Support Option Product Name / Description Part Number High temperature resistant Kit Required for high temperature operation over 40°C (up to 45°C) NOTE: This option is not applicable to N8100-2420F (460 Watt power supply model). N8181-144F NOTE: To apply this option, there are some configuration limitations below. Required System Configuration: - Installed memory must be 6 DIMMs per processor or less. - Up to two Flash backup units for RAID controller can be installed. - Do not install N8102-667F 128GB DDR4-2400 REG Memory Kit (2x64GB) - Do not install N8181-125 Redundant Fan Kit - Do not install N8151-125 Internal RDX (USB) 9.6 Flash FDD Choose the Flash FDD if you need to prepare an alternative device for a floppy drive. Product Name / Description Part Number Flash FDD USB flash emulating USB floppy disk, Native capacity 1.44 MB N8160-96 NOTE: Up to one drive can be connected. NEC Corporation Revision 1.1 – May, 2016 33 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 10 Add-on Components 10.1 17-inch LCD Console Drawer Category Drawer Drawer w/ KVM Cable Drawer Drawer w/o KVM Keypad Product Name / Description Part Number 17-inch LCD Console Drawer (8port) 17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port KVM switch, 1U height Switch Unit Connection Cable Set (USB, 1.8m) 1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB, 3m) 3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB, 5m) 5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A 17inch LCD Console Unit 1U 17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height, 4-pin USB B to 4-pin USB A cable 2 m, PS/2 Y-splitter cable 2m, 15-pin mini D-sub VGA cable 2 m 17inch LCD Console Drawer (1port) 17-inch LCD, US 103-keys Keyboard with 10-key, Touch pad with 3-button, 1U height, 4-pin USB B to 4-pin USB A cable 1.8 m, Two PS/2 cable 1.8 m, 15-pin mini D-sub VGA cable 1.8 m Keyboard Unit (JP) JP 108-keys Keyboard with 10-key for N8143-108F 17inch LCD Console Drawer (1port) Keyboard Unit (UK) UK 104-keys Keyboard with 10-key, for N8143-108F 17inch LCD Console Drawer (1port) N8143-106F K410-118(1A) K410-118(03) K410-118(05) N8143-105F N8143-108F N8143-109 N8143-111 NOTE: There are two VGA connectors on R120g-2M, one on the front side and one on the rear side. However, the front side only works when both are connected at the same time. 10.2 KVM Switch Category Product Name / Description Part Number KVM Switch Server Switch Unit (8 server) 1U USB 8 port KVM switch N8191-14F Switch Unit Connection Cable Set (USB,1.8m) 1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,3m) 3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable Set (USB,3m) 5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin USB A Switch Unit Connection Cable 1.8 m 1.8 m, 1 x 15-pin mini D-sub - 1x 15-pin mini D-Sub / 2x PS/2 K410-118(1A) Cable KVM Cascading K410-118(03) K410-118(05) K410-119(1A) NOTE: There are two VGA connectors on R120g-2M, one on the front side and one on the rear side. However, the front side only works when both are connected at the same time. NEC Corporation Revision 1.1 – May, 2016 34 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M 10.3 Cable Management Arm Product Name / Description Part Number Cable Management Arm 2U Kit For R120g-2M N8143-95 10.4 Server Management License The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the standard management features. For more extensive remote KVM and remote media features, choose the following kit. Product Name / Description Part Number Remote KVM and Media License Kit N8115-04 License for one server. Remote KVM and remote media are enabled regardless of OS status. Remote KVM: Displays a graphics console on the web browser of the remote terminal (PC/server). Controls keyboard and mouse via the remote terminals' web browser Remote media: Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals (PC/server) as if accessing the local drives. NOTE: Remote KVM and remote media features are not available for virtual machines. 10.5 Medium and Cartridge Category Product Name Drive supported Part Number RDX RDX Cartridge (500GB) RDX Cartridge (1TB) RDX Cartridge (2TB) RDX Cartridge (3TB) N8151-125 N8151-125 N8151-125 N8151-125 N8153-02 N8153-03 N8153-09 N8153-10 NEC Corporation Revision 1.1 – May, 2016 35 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M References Boot Mode Setting The server supports Legacy mode and UEFI mode (default) as an OS Boot Mode. See the table below for the Boot Mode and X2APIC setting for each Operating System. As the default settings at the factory, UEFI mode is set as OS Boot mode and X2APIC is enabled. Refer to the User’s Guide and change the settings before installing an Operating System requiring Legacy Mode. Operating System Supported Boot Mode Supported X2APIC Setting Windows Server 2008 R2 (x64) Windows Server 2012 Windows Server 2012 R2 Red Hat Enterprise Linux 6(x86_64) Red Hat Enterprise Linux 7 VMware ESXi 5.5 Update3 VMware ESXi 6.0 Update1 Legacy UEFI UEFI UEFI UEFI Legacy Legacy Disabled Enabled Enabled Enabled Enabled Disabled Disabled NEC Corporation Revision 1.1 – May, 2016 36 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Server Management The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system management features listed in the table below. Standard Hardware monitoring Boot monitoring Alerting Remote KVM (via LAN) Remote control (via LAN) Maintenance Others 1 2 3 4 5 Temperature/voltage/power/RAID/ standard LAN/fan /degeneration (memory/hard drive) Hardware configuration information collection Hardware event log collection BIOS/POST stall, Booting, OS stall, shutdown HW error, Boot error , and OS panic (by SNMP, E-Mail) POST/BIOS setup, ROM utility Panic screen, Boot screen CUI-based screen (OS console) GUI-based screen (OS console) Remote console recording function Video recording Remote reset/power on-off/ dump Remote power capping BIOS/BMC FW update Remote BIOS setup(partial configuration only) OS shutdown Remote media (CD/DVD/FD/USB) CLP (Command Line Protocol) (DMTF compliant) Remote control via Web browser (multi user login at the same time) Scheduling (without UPS) BIOS setting by using XML file EXPRESSSCOPE® Profile key (Backup/restore BIOS/BMC setup information) Set automatic IP address via DNS/DHCP LDAP/Active Directory verification/user control Clock synchronization of main unit and the RTC Access log collection IPMI IPv6(Web console/CLP only) With Remote KVM and Media License kit 5 5 1 1 2, 3, 4 2, 4 1 2 1 1 1 2.0 2.0 The feature is not supported on VMware ESXi systems. The optional serial port is not available for the feature. Monitoring boot screens is not supported on VMware systems. In VMware systems, only the direct console user interface is supported. To obtain the information of N8104-156F Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card, the BMC firmware version must be 02.11 or later. NEC Corporation Revision 1.1 – May, 2016 37 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Endurance of SSD The 2.5-inch SAS/SATA SSDs have limited lifetime, which can only be written a limited number of times before it fails. The warranty period of SSD is the stated period of warranty or until the total bytes of written value (PBW) exceeds the limit value, whichever occurs first. It is recommended to check the total bytes of written value periodically. Refer to the table below for the write endurance (PBW and DWPD), warranty period and monitoring tool. SSD Lifetime Part Number Product Name PBW DWPD Period Monitoring Tool N8150-721 200GB Hot Plug 2.5-inch SAS SSD 3.6PBW 10 Times 3 Years N8150-722 400GB Hot Plug 2.5-inch SAS SSD 7.3PBW 10 Times 3 Years Universal RAID Utility, EXPRESSBUILDER (System Test and Diagnostics) SAS SSD SATA SSD (Middle Endurance) N8150-725 200GB Hot Plug 2.5-inch SATA SSD 3.6PBW 10 Times 3 Years N8150-726 400GB Hot Plug 2.5-inch SATA SSD 7.3PBW 10 Times 3 Years N8150-727 800GB Hot Plug 2.5-inch SATA SSD 14.6PBW 10 Times 3 Years SATA SSD (Value Endurance) N8150-732 200GB Hot Plug 2.5-inch SATA SSD 1.1PBW 3 Times 3 Years N8150-733 400GB Hot Plug 2.5-inch SATA SSD 3.0PBW 3 Times 3 Years N8150-734 800GB Hot Plug 2.5-inch SATA SSD 5.3PBW 3 Times 3 Years N8150-735 1.6TB Hot Plug 2.5-inch SATA SSD 10.7PBW 3 Times 3 Years PBW(Peta-Bytes Write): Total amount of data that can be written into the SSD. 1PB=1,000TB. DWPD(Drive Writes per Day): Rewrite capacity of the SSD per day. Check the lifetime of SSD by monitoring tool regularly. It is recommended to replace the SSD before it reaches its end of life. For repurchase, please contact your sales representative. For detailed operating methods of monitoring tool, refer to the User’s Guide. NEC Corporation Revision 1.1 – May, 2016 38 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M OS Support Matrix for PCI Cards and Embedded Controllers ESXi 5.5 ESXi 6.0 RHEL 6 x64 RHEL 7 WS 2008 R2 WS 2012 WS 2012 R2 Part number Product Name N8103-176 N8103-177 N8103-178 N8103-179 N8103-184 N8103-142 N8190-158A N8190-157A N8190-160 N8190-159 N8104-155F N8104-160F N8104-156F Embedded SATA non-RAID Controller RAID Controller (1GB, RAID 0/1) RAID Controller (1GB, RAID 0/1/5/6) RAID Controller (2GB, RAID 0/1/5/6) RAID Controller (2GB, RAID0/1/5/6) SAS Controller SAS Controller Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) Dual Port 10GBASE-T LOM Card Dual Port 10GBASE-T LOM Card Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card Quad Port 1000BASE-T LOM Card Dual Port 10GBASE-T Adapter Dual Port 10GBASE-T Adapter 10GBASE SFP+ Adapter (SFP+/2ch) Dual Port 10GBASE SFP+ Adapter (SFP+/2ch) Quad Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter 1000BASE-T Adapter Dual Port InfiniBand Adapter Single Port InfiniBand Adapter 2.5-inch PCIeSSD Installation Kit N8104-154F N8104-157 N8104-153 N8104-149 N8104-148 N8104-152 N8104-145 N8104-151 N8104-150 N8104-147 N8104-146 N8118-301 NEC Corporation Revision 1.1 – May, 2016 - - - - - - - - - - - - - - - - - - - - - - - - - - 39 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Supported PCI Cards and Installable Slots Standard Riser Card Slots Prio rity Part Number (1) (2) (3) N8104-155F N8104-160F N8104-156F (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) N8104-154F N8103-176 N8103-177 N8103-178 N8103-179 N8118-301 N8190-158A N8190-157A N8104-147 N8104-146 N8103-184 N8104-157 N8104-153 N8104-149 N8104-148 (19) (20) (21) (22) (23) (24) (25) (26) N8190-160 N8190-159 N8103-142 N8104-152 N8104-145 N8104-151 N8104-150 N8117-01A Product Name Dual Port 10GBASE-T LOM Card Dual Port 10GBASE-T LOM Card Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card Quad Port 1000BASE-T LOM Card RAID Controller (1GB, RAID 0/1) RAID Controller (1GB, RAID 0/1/5/6) RAID Controller (2GB, RAID 0/1/5/6) RAID Controller (2GB, RAID0/1/5/6) 2.5-inch PCIeSSD Installation Kit Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) Dual Port InfiniBand Adapter Single Port InfiniBand Adapter SAS Controller Dual Port 10GBASE-T Adapter Dual Port 10GBASE-T Adapter 10GBASE SFP+ Adapter (SFP+/2ch) Dual Port 10GBASE SFP+ Adapter (SFP+/2ch) Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) SAS Controller Quad Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter 1000BASE-T Adapter Serial Port Adapter #1A #1B #1C #2C #3C #1D #2D #3D - (1) (1) (1) - - - - - - (1) (1) (1) - (1) - (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) - - (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) - (4) (4) (4) (4) (4) (4) (4) - (2) (2) (2) (2) (2) (2) (2) (2) (5) (5) (5) (5) (5) (5) (5) (3) (6) (6) (6) (6) (6) (6) (6) (4) NOTE: The slot #2C, #3C, #2D, and #3D are available in a dual-processor configuration. Up to 312 mm / 12.28in length card can be installed into slot #2C when N8116-37 Full Length PCI Card installation Kit is installed. The number between parentheses shows the population priority (recommendation). For example, install N8104-155F (1) in the slot #1B, N8103-176 (5) in the slot #1A, N8104-153 (16) in the slot #1C and N8190-160 (19) in the slot #1D when you install those cards. For VMware ESXi 5.5, there are some limitations as follows: <With N8104-154F Quad Port 1000BASE-T LOM Card> - N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/2697Av4/2698v4/2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/2667v4/2680v4/2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed NEC Corporation Revision 1.1 – May, 2016 40 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-155F Dual Port 10GBASE-T LOM Card> - N8104-150/-151 and N8104-152 cannot be mixed. - Up to two cards of N8104-150/-151 can be installed. - Up to one card of N8104-152 can be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-156F Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card > - Up to two cards of N8104-150/-151 can be installed. - N8104-152 cannot be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to one card among N8104-151/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * Up to two cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to two cards among N8104-149/-153/-157 can be installed d) Up to five cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. For VMware ESXi 6.0, there are some limitations as follows: - With N8104-154F Quad Port 1000BASE-T LOM Card: N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed - With N8104-155F Dual Port 10GBASE-T LOM Card: N8104-150/-151 and N8104-152 cannot be mixed. Up to two cards of N8104-150/-151 can be installed. Up to one N8104-152 can be installed - With N8104-156F Dual Port 10GBASE-T LOM Card: Up to one of N8104-150/-151 can be installed. N8104-152 cannot be installed. For the configuration limitation for VMware ESXi, refer to the following documents. VMware ESXi5.5 https://www.vmware.com/pdf/vsphere5/r55/vsphere-55-configuration-maximums.pdf VMware ESXi6.0 https://www.vmware.com/pdf/vsphere6/r60/vsphere-60-configuration-maximums.pdf NEC Corporation Revision 1.1 – May, 2016 41 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M N8116-34/34A PCIe x16 Riser Card Kit Slots Prio rity Part Number (1) (2) (3) N8104-155F N8104-160F N8104-156F (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) N8104-154F N8103-176 N8103-177 N8103-178 N8103-179 N8118-301 N8190-158A N8190-157A N8104-147 N8104-146 N8103-184 N8104-157 N8104-153 N8104-149 N8104-148 (19) (20) (21) (22) (23) (24) (25) (26) N8190-160 N8190-159 N8103-142 N8104-152 N8104-145 N8104-151 N8104-150 N8117-01A Product Name Dual Port 10GBASE-T LOM Card Dual Port 10GBASE-T LOM Card Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card Quad Port 1000BASE-T LOM Card RAID Controller (1GB, RAID 0/1) RAID Controller (1GB, RAID 0/1/5/6) RAID Controller (2GB, RAID 0/1/5/6) RAID Controller (2GB, RAID0/1/5/6) 2.5-inch PCIeSSD Installation Kit Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) Dual Port InfiniBand Adapter Single Port InfiniBand Adapter SAS Controller Dual Port 10GBASE-T Adapter Dual Port 10GBASE-T Adapter 10GBASE SFP+ Adapter (SFP+/2ch) Dual Port 10GBASE SFP+ Adapter (SFP+/2ch) Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) SAS Controller Quad Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter 1000BASE-T Adapter Serial Port Adapter #1A #1B #1C #2C #1D #2D #3D - (1) (1) (1) - - - - - (1) (1) (1) - (1) - (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) - - (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) - (2) (2) (2) (2) (2) (2) (2) (2) (4) (4) (4) (4) (4) (4) (4) (3) (5) (5) (5) (5) (5) (5) (5) (3) NOTE: The slot #2C, #2D, and #3D are available in a dual-processor configuration. Up to 312 mm / 12.28in length card can be installed into slot #2C when N8116-37 Full Length PCI Card installation Kit is installed. The number between parentheses shows the population priority (recommendation). For example, install N8104-155F (1) in the slot #1B, N8103-176 (5) in the slot #1A, N8104-153 (16) in the slot #1C and N8190-160 (19) in the slot #1D when you install those cards. For VMware ESXi 5.5, there are some limitations as follows: <With N8104-154F Quad Port 1000BASE-T LOM Card> - N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/2697Av4/2698v4/2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/2667v4/2680v4/2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-155F Dual Port 10GBASE-T LOM Card> - N8104-150/-151 and N8104-152 cannot be mixed. NEC Corporation Revision 1.1 – May, 2016 42 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M - Up to two cards of N8104-150/-151 can be installed. - Up to one card of N8104-152 can be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-156F Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card > - Up to two cards of N8104-150/-151 can be installed. - N8104-152 cannot be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to one card among N8104-151/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * Up to two cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to two cards among N8104-149/-153/-157 can be installed d) Up to five cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. For VMware ESXi 6.0, there are some limitations as follows: - With N8104-154F Quad Port 1000BASE-T LOM Card: N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed - With N8104-155F Dual Port 10GBASE-T LOM Card: N8104-150/-151 and N8104-152 cannot be mixed. Up to two cards of N8104-150/-151 can be installed. Up to one N8104-152 can be installed - With N8104-156F Dual Port 10GBASE-T LOM Card: Up to one of N8104-150/-151 can be installed. N8104-152 cannot be installed. For the configuration limitation for VMware ESXi, refer to the following documents. VMware ESXi5.5 https://www.vmware.com/pdf/vsphere5/r55/vsphere-55-configuration-maximums.pdf VMware ESXi6.0 https://www.vmware.com/pdf/vsphere6/r60/vsphere-60-configuration-maximums.pdf NEC Corporation Revision 1.1 – May, 2016 43 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M N8116-45 PCIe x4/x16 FH Riser Card Kit Slots Prio rity Part Number (1) (2) (3) N8104-155F N8104-160F N8104-156F (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) N8104-154F N8103-176 N8103-177 N8103-178 N8103-179 N8118-301 N8190-158A N8190-157A N8104-147 N8104-146 N8103-184 N8104-157 N8104-153 N8104-149 N8104-148 (19) (20) (21) (22) (23) (24) (25) (26) N8190-160 N8190-159 N8103-142 N8104-152 N8104-145 N8104-151 N8104-150 N8117-01A Product Name Dual Port 10GBASE-T LOM Card Dual Port 10GBASE-T LOM Card Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card Quad Port 1000BASE-T LOM Card RAID Controller (1GB, RAID 0/1) RAID Controller (1GB, RAID 0/1/5/6) RAID Controller (2GB, RAID 0/1/5/6) RAID Controller (2GB, RAID0/1/5/6) 2.5-inch PCIeSSD Installation Kit Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) Dual Port InfiniBand Adapter Single Port InfiniBand Adapter SAS Controller Dual Port 10GBASE-T Adapter Dual Port 10GBASE-T Adapter 10GBASE SFP+ Adapter (SFP+/2ch) Dual Port 10GBASE SFP+ Adapter (SFP+/2ch) Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) SAS Controller Quad Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter 1000BASE-T Adapter Serial Port Adapter #1A #1B #1C #2C #3C #1D #2D #3D - (1) (1) (1) - - - - - - (1) (1) (1) - (1) - (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) - - (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) - (4) (4) (4) (4) (4) (4) (4) - (2) (2) (2) (2) (2) (2) (2) (2) (5) (5) (5) (5) (5) (5) (5) (3) (6) (6) (6) (6) (6) (6) (6) (4) NOTE: The slot #3C, #2D, and #3D are available in a dual-processor configuration. Up to 312 mm / 12.28in length card can be installed into slot #2C when N8116-37 Full Length PCI Card installation Kit is installed. The number between parentheses shows the population priority (recommendation). For example, install N8104-155F (1) in the slot #1B, N8103-176 (5) in the slot #1A, N8104-153 (16) in the slot #1C and N8190-160 (19) in the slot #1D when you install those cards. For VMware ESXi 5.5, there are some limitations as follows: <With N8104-154F Quad Port 1000BASE-T LOM Card> - N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/2697Av4/2698v4/2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/2667v4/2680v4/2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-155F Dual Port 10GBASE-T LOM Card> - N8104-150/-151 and N8104-152 cannot be mixed. NEC Corporation Revision 1.1 – May, 2016 44 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M - Up to two cards of N8104-150/-151 can be installed. - Up to one card of N8104-152 can be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-156F Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card > - Up to two cards of N8104-150/-151 can be installed. - N8104-152 cannot be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to one card among N8104-151/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * Up to two cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to two cards among N8104-149/-153/-157 can be installed d) Up to five cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. For VMware ESXi 6.0, there are some limitations as follows: - With N8104-154F Quad Port 1000BASE-T LOM Card: N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed - With N8104-155F Dual Port 10GBASE-T LOM Card: N8104-150/-151 and N8104-152 cannot be mixed. Up to two cards of N8104-150/-151 can be installed. Up to one N8104-152 can be installed - With N8104-156F Dual Port 10GBASE-T LOM Card: Up to one of N8104-150/-151 can be installed. N8104-152 cannot be installed. For the configuration limitation for VMware ESXi, refer to the following documents. VMware ESXi5.5 https://www.vmware.com/pdf/vsphere5/r55/vsphere-55-configuration-maximums.pdf VMware ESXi6.0 https://www.vmware.com/pdf/vsphere6/r60/vsphere-60-configuration-maximums.pdf NEC Corporation Revision 1.1 – May, 2016 45 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M N8116-49 PCIe x4/x16 FH/LP Riser Card Kit or N8116-45 PCIe x4/x16 FH Riser Card Kit plus N8116-46 PCIe x4/x16 LP Riser Card Kit Slots Prio rity Part Number (1) (2) (3) N8104-155F N8104-160F N8104-156F (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) N8104-154F N8103-176 N8103-177 N8103-178 N8103-179 N8118-301 N8190-158A N8190-157A N8104-147 N8104-146 N8103-184 N8104-157 N8104-153 N8104-149 N8104-148 (19) (20) (21) (22) (23) (24) (25) (26) N8190-160 N8190-159 N8103-142 N8104-152 N8104-145 N8104-151 N8104-150 N8117-01A Product Name Dual Port 10GBASE-T LOM Card Dual Port 10GBASE-T LOM Card Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card Quad Port 1000BASE-T LOM Card RAID Controller (1GB, RAID 0/1) RAID Controller (1GB, RAID 0/1/5/6) RAID Controller (2GB, RAID 0/1/5/6) RAID Controller (2GB, RAID0/1/5/6) 2.5-inch PCIeSSD Installation Kit Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) Dual Port InfiniBand Adapter Single Port InfiniBand Adapter SAS Controller Dual Port 10GBASE-T Adapter Dual Port 10GBASE-T Adapter 10GBASE SFP+ Adapter (SFP+/2ch) Dual Port 10GBASE SFP+ Adapter (SFP+/2ch) Fibre Channel Controller (2ch) Fibre Channel Controller (1ch) SAS Controller Quad Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter Dual Port 1000BASE-T Adapter 1000BASE-T Adapter Serial Port Adapter #1A #1B #1C #2C #3C #1D #2D #3D - (1) (1) (1) - - - - - - (1) (1) (1) - (1) - (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (3) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (4) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) - - (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (3) (3) (3) (3) - (4) (4) (4) (4) (4) (4) (4) - (2) (2) (2) (2) (2) (2) (2) (2) (5) (5) (5) (5) (5) (5) (5) (3) (6) (6) (6) (6) (6) (6) (6) (4) NOTE: The slot #3C and #3D are available in a dual-processor configuration. Up to 312 mm / 12.28in length card can be installed into slot #2C when N8116-37 Full Length PCI Card installation Kit is installed. The number between parentheses shows the population priority (recommendation). For example, install N8104-155F (1) in the slot #1B, N8103-176 (5) in the slot #1A, N8104-153 (16) in the slot #1C and N8190-160 (19) in the slot #1D when you install those cards. For VMware ESXi 5.5, there are some limitations as follows: <With N8104-154F Quad Port 1000BASE-T LOM Card> - N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/2697Av4/2698v4/2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/2667v4/2680v4/2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed NEC Corporation Revision 1.1 – May, 2016 46 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-155F Dual Port 10GBASE-T LOM Card> - N8104-150/-151 and N8104-152 cannot be mixed. - Up to two cards of N8104-150/-151 can be installed. - Up to one card of N8104-152 can be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to two cards among N8104-151/-152/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8190-160/N8190-158A/N8103-184 can be installed * Up to three cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to three cards among N8104-152/-149/-153/-157 can be installed d) Up to six cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. <With N8104-156F Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card > - Up to two cards of N8104-150/-151 can be installed. - N8104-152 cannot be installed. - Up to one card among N8103-176/-177/-178/-179 can be installed. - When configured with Xeon E5-2697v4/E5-2697Av4/E5-2698v4/E5-2699v4, a) Up to one card among N8104-151/-149/-153/-157 can be installed b) Up to two cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * Up to two cards when the above a) and b) are mixed - When configured with Xeon E5-2603v4/E5-2620Av4/E5-2623v4/E5-2630v4/E5-2637v4/E5-2640v4/ E5-2643v4/E5-2650v4/E5-2667v4/E5-2680v4/E5-2690v4, c) Up to two cards among N8104-149/-153/-157 can be installed d) Up to five cards among N8104-150/N8104-151/N8190-160/N8190-158A/N8103-184 can be installed * When the above c) and d) are mixed, up to four cards can be installed. For VMware ESXi 6.0, there are some limitations as follows: - With N8104-154F Quad Port 1000BASE-T LOM Card: N8104-149/-153/-157 and N8104-150/-151/-152 cannot be mixed - With N8104-155F Dual Port 10GBASE-T LOM Card: N8104-150/-151 and N8104-152 cannot be mixed. Up to two cards of N8104-150/-151 can be installed. Up to one N8104-152 can be installed - With N8104-156F Dual Port 10GBASE-T LOM Card: Up to one of N8104-150/-151 can be installed. N8104-152 cannot be installed. For the configuration limitation for VMware ESXi, refer to the following documents. VMware ESXi5.5 https://www.vmware.com/pdf/vsphere5/r55/vsphere-55-configuration-maximums.pdf VMware ESXi6.0 https://www.vmware.com/pdf/vsphere6/r60/vsphere-60-configuration-maximums.pdf NEC Corporation Revision 1.1 – May, 2016 47 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Copyright Notice and Liability Disclaimer The information contained herein is subject to change without notice. Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Linux is a trademark of Linus Torvalds. Red Hat is a registered trademark of Red Hat, Inc. in the U.S. All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders. NEC shall not be liable for technical or editorial errors or omissions contained herein. For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less. NEC Corporation Revision 1.1 – May, 2016 48 SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120g-2M Revision History Revision Date Description 1.1 May 17, 2016 1.0 April 25, 2016 Others: Added DVD read speed information Initial release NEC Corporation Revision 1.1 – May, 2016 49