- NEC Corporation

NEC Express5800/R120e-2M
System Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The
guide will ensure fast and proper configuration of your NEC Express5800 server.
February 18, 2015
Revision 6.1
NEC Corporation
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Contents
TECHNICAL SPECIFICATION ........................................................................................ 4
Key Features .......................................................................................................................................... 4
Specification .......................................................................................................................................... 4
EXTERNAL VIEWS ....................................................................................................... 11
Front and Rear Views ......................................................................................................................... 11
Dimensions (mm) ................................................................................................................................ 13
CONFIGURATION DIAGRAM ....................................................................................... 14
Expansion Slots .................................................................................................................................. 14
SERVER CONFIGURATION ......................................................................................... 15
1
2
3
4
5
6
7
8
9
Base Models ................................................................................................................................. 15
Processors and Heat Sink .......................................................................................................... 15
Memory ......................................................................................................................................... 16
3.1
Memory Configuration........................................................................................................ 16
3.2
Other OS than Windows Server 2008 Standard ................................................................ 16
3.3
Windows Server 2008 Standard ........................................................................................ 18
Internal Hard Disk Drives ............................................................................................................ 20
4.1
RAID Configuration ............................................................................................................ 20
4.2
Internal Drive Configuration ............................................................................................... 21
Optical Drive ................................................................................................................................. 29
Internal RDX Drive ....................................................................................................................... 29
6.1
RDX Configuration ............................................................................................................. 29
PCI Riser Card / PCI Card ........................................................................................................... 29
7.1
PCI Riser Card ................................................................................................................... 29
7.2
Full Length PCI Card installation Kit .................................................................................. 29
7.3
Graphics Card Installation Kit ............................................................................................ 30
7.4
Network Interface Controller .............................................................................................. 30
7.5
InfiniBand ........................................................................................................................... 33
7.6
External Storage Controller ............................................................................................... 34
7.7
Serial Port Adapter ............................................................................................................. 35
Other Add-in Components .......................................................................................................... 35
8.1
Power Supply Module ........................................................................................................ 35
8.2
Redundant Fan Kit ............................................................................................................. 35
8.3
Trusted Platform Module Kit .............................................................................................. 35
8.4
Internal Flash Memory ....................................................................................................... 36
8.5
Flash FDD .......................................................................................................................... 36
8.6
Front Bezel ......................................................................................................................... 36
Add-on Components ................................................................................................................... 36
9.1
17-inch LCD Console Drawer ............................................................................................ 36
9.2
KVM Switch ........................................................................................................................ 37
9.3
Cable Management Arm .................................................................................................... 37
9.4
Server Management License ............................................................................................. 37
9.5
Medium and Cartridge ....................................................................................................... 38
REFERENCES............................................................................................................... 39
Server Management ............................................................................................................................ 39
OS Support Matrix for PCI Cards and Embedded Controllers ....................................................... 40
Supported PCI Cards and Installable Slots ...................................................................................... 41
NEC Corporation
Revision 6.1 – February 18, 2015
2
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Copyright Notice and Liability Disclaimer ........................................................................................ 45
REVISION HISTORY ..................................................................................................... 46
NEC Corporation
Revision 6.1 – February 18, 2015
3
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Technical Specification
Key Features




High performance with the latest Intel® Xeon® processor E5-2600 v2 product family
Up to 1.5 TB of high speed DDR3 memory
High energy efficiency with power capping feature and 80 PLUS® Platinum power supply
Full manageability by integrated EXPRESSSCOPE Engine 3
Specification
(1 / 3)
Model
R120e-2M
Part Number
Processor
N8100-2072F
Intel® Xeon® Intel® Xeon® Intel® Xeon® Intel® Xeon®
processor
processor
processor
processor
E5-2609 V2
E5-2620 v2
E5-2630 v2
E5-2630L v2
2.50 GHz
2.10 GHz
2.60 GHz
2.40 GHz
1 to 2
10 MB
15 MB
4C-4T
6C-12T
Intel® C602-J Chipset
DDR3-1600 ECC Unbuffered Low Power DIMM,
DDR3-1600 ECC Registered Low Power DIMM,
DDR3-1600 ECC Load Reduced DIMM
DDR3-1333 ECC Load Reduced DIMM
0 GB
1.5 TB (24 x 64 GB)
ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory
Sparing
0 GB
SAS HDD : 19.2 TB (16 x 1.2 TB)
SATA HDD : 16 TB (16 x 1 TB)
SAS SSD : 6.4 TB ( 16 x 400 GB)
SATA : 3Gb/s and 6Gb/s (Integrated)
SAS: 6 Gb/s (Optional)
SATA : RAID 0/1/5/6/10/50/60 (Optional)
SAS : RAID 0/1/5/6/10/50/60 (Optional)
Supported
Optional
1
1
1
16
Total: 7 slots available
2 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2
1 PCIe 3.0 x8 (x16 connector)
1 PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Type
Clock speed
Number of Processors
Cache
Cores and Threads
Chipset
Memory
Type
Standard Capacity
Maximum Capacity
Memory protection
Internal Storage
Standard Capacity
Maximum Capacity
Disk Controller
RAID
Expansion Slots
Hot Plug
Optical Disk Drive
Optical Drive Bays
3.5-inch Media Bays
Disk Drive Bays
Standard
Optional Riser Card
(N8116-25)
NEC Corporation
Total: 6 slots available
1 PCIe 3.0 x16 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
1 PCIe 3.0 x8 (x16 connector) 2
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Revision 6.1 – February 18, 2015
4
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Model
Expansion Slots
(Cont.)
R120e-2M
Optional Riser Card
(N8116-26)
Optional Riser Card
(N8116-27)
Video
Controller (VRAM)
Resolution / Color
Interfaces
Server Management
Redundant Fan
Redundant Power Supply
Power Supply
Power
Consumption
(Max. Config, Idling)
(Max. Config,
Operating)
Acoustical Noise
Max. Config, Idling
(Sound Pressure
Max. Config, Operating
4
Level)
Dimensions (W x D x H )
Weight (Minimum / Maximum)
Temperature, Relative Humidity
(non-condensing)
Regulatory and Safety
Operating Systems
NEC Corporation
Total: 7 slots available
1 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2
1 PCIe 3.0 x8 (x16 connector)
1 64-bit/ 133 MHz PCI-X
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
2
1 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2 64-bit / 33 MHz 5V PCI
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Integrated in Server Management Controller (32MB)
3
1280 x 1024 / 16.7M
2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear)
1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2rear)
9 x USB2.0 (2 x front, 4 x rear, 3 x internal)
2 x 1000BASE-T LAN connector (RJ-45, 2 x rear)
1 x Management LAN connector (RJ-45, 1 x rear)
EXPRESSSCOPE Engine 3
Optional, hot plug
Optional, hot plug
1 to 2 x 450 Watt or 800 Watt or 1000 Watt 80 PLUS® Platinum
certified hot plug PSU, or 800 Watt 80 PLUS® Titanium certified
hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
360 VA /
364 VA /
367 VA /
356 VA /
358 Watt
361 Watt
365 Watt
354 Watt
631 VA /
670 VA /
751 VA /
691 VA /
627 Watt
665 Watt
746 Watt
686 Watt
53.6dB
53.6dB
56.3dB
55.6dB
5
5
448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U)
20.5 kg / 33 kg, 45.19 lbs. / 72.75 lbs.
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
FCC, RCM, CE, UL, CB, BSMI, KC, CCC, BIS, RoHS, WEEE
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 Datacenter
6
Microsoft® Windows Server® 2012 R2 Standard
6
Microsoft® Windows Server® 2012 R2 Datacenter
7
Red Hat Enterprise Linux 5.9 or later (x86)
7
Red Hat Enterprise Linux 5.9 or later (x86_64)
7
Red Hat Enterprise Linux 6.4 or later (x86)
7
Red Hat Enterprise Linux 6.4 or later (x86_64)
7
Red Hat Enterprise Linux 7.0 or later
VMware ESX™i 5.0 Update 2
VMware ESX™i 5.1 Update 1
VMware ESX™i 5.5
VMware ESX™i 5.5 Update 1
Revision 6.1 – February 18, 2015
5
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
1
2
3
4
5
6
7
An optional drive cage is required to install more than 8 hard drives.
Available only when the second processor is configured.
Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors.
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating
environment.
When mounting 1000 Watt power supply, the depth is 770 mm (30.31 in).
For Windows Server 2012 R2 installation, download the driver kit from the following website and install it after OS
installation
http://www.nec.com/en/global/prod/express/download/
For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
(2 / 3)
Model
Part Number
Processor
R120e-2M
Type
Clock speed
Number of Processors
Cache
Cores and Threads
Chipset
Memory
Type
Standard Capacity
Maximum Capacity
Memory protection
Internal Storage
Standard Capacity
Maximum Capacity
Disk Controller
RAID
Expansion Slots
NEC Corporation
Hot Plug
Optical Disk Drive
Optical Drive Bays
3.5-inch Media Bays
Disk Drive Bays
Standard
N8100-2072F
Intel® Xeon® Intel® Xeon® Intel® Xeon® Intel® Xeon®
processor
processor
processor
processor
E5-2637 v2
E5-2640 v2
E5-2650 v2
E5-2660 v2
3.50 GHz
2 GHz
2.60 GHz
2.20 GHz
1 to 2
15 MB
20 MB
25MB
4C-8T
8C-16T
10C-20T
Intel® C602-J Chipset
DDR3-1600 ECC Unbuffered Low Power DIMM,
DDR3-1600 ECC Registered Low Power DIMM,
1
DDR3-1866 ECC Registered DIMM ,
DDR3-1600 ECC Load Reduced DIMM
DDR3-1333 ECC Load Reduced DIMM
0 GB
1.5 TB (24 x 64 GB)
ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory
Sparing
0 GB
SAS HDD : 19.2 TB (16 x 1.2 TB)
SATA HDD : 16 TB (16 x 1 TB)
SAS SSD : 6.4 TB ( 16 x 400 GB)
SATA : 3Gb/s and 6Gb/s (Integrated)
SAS: 6 Gb/s (Optional)
SATA : RAID 0/1/5/6/10/50/60 (Optional)
SAS : RAID 0/1/5/6/10/50/60 (Optional)
Supported
Optional
1
1
2
16
Total: 7 slots available
2 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
1 PCIe 3.0 x8 (x16 connector) 3
1 PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Revision 6.1 – February 18, 2015
6
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Model
Expansion Slots
(Cont.)
R120e-2M
Optional Riser Card
(N8116-25)
Optional Riser Card
(N8116-26)
Optional Riser Card
(N8116-27)
Video
Controller (VRAM)
Resolution / Color
Interfaces
Server Management
Redundant Fan
Redundant Power Supply
Power Supply
Power
Consumption
(Max. Config, Idling)
(Max. Config,
Operating)
Acoustical Noise
Max. Config, Idling
(Sound Pressure
Max. Config, Operating
5
Level)
Dimensions (W x D x H )
Weight (Minimum / Maximum)
Temperature, Relative Humidity
(non-condensing)
Regulatory and Safety
Operating Systems
NEC Corporation
Total: 6 slots available
1 PCIe 3.0 x16 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
3
1 PCIe 3.0 x8 (x16 connector)
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
1 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
3
1 PCIe 3.0 x8 (x16 connector)
1 64-bit/ 133 MHz PCI-X
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
3
1 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2 64-bit / 33 MHz 5V PCI
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Integrated in Server Management Controller (32MB)
4
1280 x 1024 / 16.7M
2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear)
1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2rear)
9 x USB2.0 (2 x front, 4 x rear, 3 x internal)
2 x 1000BASE-T LAN connector (RJ-45, 2 x rear)
1 x Management LAN connector (RJ-45, 1 x rear)
EXPRESSSCOPE Engine 3
Optional, hot plug
Optional, hot plug
1 to 2 x 450 Watt or 800 Watt or 1000 Watt 80 PLUS® Platinum
certified hot plug PSU, or 800 Watt 80 PLUS® Titanium certified
hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
367 VA /
375 VA /
369 VA /
372 VA /
364 Watt
372 Watt
367 Watt
369 Watt
754 VA /
751 VA /
795 VA /
789 VA /
749 Watt
745 Watt
790 Watt
783 Watt
53.6dB
53.6dB
59.6dB
56.3dB
6
6
448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U)
20.5 kg / 33 kg, 45.19 lbs. / 72.75 lbs.
7
7
Operating: 10° to 40° C / 50° to 104° F , 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
FCC, RCM, CE, UL, CB, BSMI, KC, CCC, BIS, RoHS, WEEE
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 Datacenter
8
Microsoft® Windows Server® 2012 R2 Standard
8
Microsoft® Windows Server® 2012 R2 Datacenter
9
Red Hat Enterprise Linux 5.9 or later (x86)
9
Red Hat Enterprise Linux 5.9 or later (x86_64)
9
Red Hat Enterprise Linux 6.4 or later (x86)
9
Red Hat Enterprise Linux 6.4 or later (x86_64)
Revision 6.1 – February 18, 2015
7
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Model
R120e-2M
Operating Systems
(Cont.)
Red Hat Enterprise Linux 7.0 or later
VMware ESX™i 5.0 Update 2
VMware ESX™i 5.1 Update 1
VMware ESX™i 5.5
VMware ESX™i 5.5 Update 1
1
2
3
4
5
6
7
8
9
9
Not supported on Xeon® processor E5-2637 v2 systems
An optional drive cage is required to install more than 8 hard drives.
Available only when the second processor is configured.
Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors.
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating
environment.
When mounting 1000 Watt power supply, the depth is 770 mm (30.31 in).
Operable up to 35°C (95°F) when Xeon processor E5-2637 v2 is configured with an added optional drive cage.
For Windows Server 2012 R2 installation, download the driver kit from the following website and install it after OS
installation
http://www.nec.com/en/global/prod/express/download/
For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
(3 / 3)
Model
Part Number
Processor
R120e-2M
Type
Clock speed
Number of Processors
Cache
Cores and Threads
Chipset
Memory
Type
Standard Capacity
Maximum Capacity
Memory protection
Internal Storage
Standard Capacity
Maximum Capacity
Disk Controller
RAID
Hot Plug
Optical Disk Drive
Optical Drive Bays
3.5-inch Media Bays
Disk Drive Bays
NEC Corporation
N8100-2072F
Intel® Xeon® Intel® Xeon® Intel® Xeon® Intel® Xeon®
processor
processor
processor
processor
E5-2670 v2
E5-2690 v2
E5-2695 v2
E5-2697 v2
2.50 GHz
3 GHz
2.40 GHz
2.70 GHz
1 to 2
25 MB
30 MB
10C-20T
12C-24T
Intel® C602-J Chipset
DDR3-1600 ECC Unbuffered Low Power DIMM,
DDR3-1600 ECC Registered Low Power DIMM,
DDR3-1866 ECC Registered DIMM,
DDR3-1600 ECC Load Reduced DIMM
DDR3-1333 ECC Load Reduced DIMM
0 GB
1.5 TB (24 x 64 GB)
ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory
Sparing
0 GB
SAS HDD : 19.2 TB (16 x 1.2 TB)
SATA HDD : 16 TB (16 x 1 TB)
SAS SSD : 6.4 TB ( 16 x 400 GB)
SATA : 3Gb/s and 6Gb/s (Integrated)
SAS: 6 Gb/s (Optional)
SATA : RAID 0/1/5/6/10/50/60 (Optional)
SAS : RAID 0/1/5/6/10/50/60 (Optional)
Supported
Optional
1
1
1
16
Revision 6.1 – February 18, 2015
8
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Model
Expansion Slots
R120e-2M
Standard
Total: 7 slots available
2 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2
1 PCIe 3.0 x8 (x16 connector)
1 PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Optional Riser Card
(N8116-25)
Total: 6 slots available
1 PCIe 3.0 x16 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2
1 PCIe 3.0 x8 (x16 connector)
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
1 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2
1 PCIe 3.0 x8 (x16 connector)
1 64-bit/ 133 MHz PCI-X
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
2
1 PCIe 3.0 x8 (x16 connector)
2 PCIe 3.0 x4 (x8 connector)
2 64-bit / 33 MHz 5V PCI
1 PCIe 3.0 x8 (x8 connector) flexible integrated NIC slot
1 PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Integrated in Server Management Controller (32MB)
3
1280 x 1024 / 16.7M
2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear)
1 to 2 Serial (9-pin mini D-sub, RS232-C, 1 to 2rear)
9 x USB2.0 (2 x front, 4 x rear, 3 x internal)
2 x 1000BASE-T LAN connector (RJ-45, 2 x rear)
1 x Management LAN connector (RJ-45, 1 x rear)
EXPRESSSCOPE Engine 3
Optional, hot plug
Optional, hot plug
1 to 2 x 450 Watt or 800 Watt or 1000 Watt 80 PLUS® Platinum
certified hot plug PSU, or 800 Watt 80 PLUS® Titanium certified
hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
365 VA /
363 VA /
378 VA /
381 VA /
362 Watt
360 Watt
375 Watt
378 Watt
819 VA /
934 VA /
895 VA /
944 VA /
813 Watt
928 Watt
889 Watt
937 Watt
53.6dB
53.6dB
53.6dB
53.6dB
56.3dB
59.6dB
56.3dB
59.6dB
Optional Riser Card
(N8116-26)
Optional Riser Card
(N8116-27)
Video
Controller (VRAM)
Resolution / Color
Interfaces
Server Management
Redundant Fan
Redundant Power Supply
Power Supply
Power
Consumption
(Max. Config, Idling)
(Max. Config,
Operating)
Acoustical Noise
Max. Config, Idling
(Sound Pressure
Max. Config, Operating
4
Level)
Dimensions (W x D x H )
Weight (Minimum / Maximum)
Temperature, Relative Humidity
(non-condensing)
Regulatory and Safety
Operating Systems
NEC Corporation
5
5
448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U)
20.5 kg / 33 kg, 45.19 lbs. / 72.75 lbs.
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
FCC, RCM, CE, UL, CB, BSMI, KC, CCC, BIS, RoHS, WEEE
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 Datacenter
Revision 6.1 – February 18, 2015
9
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Model
R120e-2M
Operating Systems
Microsoft® Windows Server® 2012 R2 Standard
7
Microsoft® Windows Server® 2012 R2 Datacenter
8
Red Hat Enterprise Linux 5.9 or later (x86)
8
Red Hat Enterprise Linux 5.9 or later (x86_64)
8
Red Hat Enterprise Linux 6.4 or later (x86)
8
Red Hat Enterprise Linux 6.4 or later (x86_64)
8
Red Hat Enterprise Linux 7.0 or later
VMware ESX™i 5.0 Update 2
VMware ESX™i 5.1 Update 1
VMware ESX™i 5.5
VMware ESX™i 5.5 Update 1
1
2
3
4
5
6
7
8
7
An optional drive cage is required to install more than 8 hard drives.
Available only when the second processor is configured.
Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors.
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating
environment.
When mounting 1000 Watt power supply, the depth is 770 mm (30.31 in).
Operable up to 35°C (95°F) when Xeon processor E5-2690 v2 or E5-2697 v2 is configured with an added
optional drive cage.
For Windows Server 2012 R2 installation, download the driver kit from the following website and install it after OS
installation
http://www.nec.com/en/global/prod/express/download/
For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
NEC Corporation
Revision 6.1 – February 18, 2015
10
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
External Views
Front and Rear Views
Front View
C
A
D F H JK L M N
O
B
EG I
P
Q
R
Legend
A.
B.
C.
D.
E.
F.
G.
H.
I.
2.5-inch Drive Bays
2.5-inch Drive Cage Bay
USB Connectors
Data LAN 1 Activity LED
Data LAN 2 Activity LED
Data LAN 3 Activity LED
Data LAN 4 Activity LED
Hard Drive Activity LED
System Status LED
NEC Corporation
J.
K.
L.
M.
N.
O.
P.
Q.
R.
BMC Reset Button
Dump (NMI) Button
System Reset Button
UID LED Button
Power Button / Power LED
VGA Connector
Media Bay
Optical Drive Bay
Pull-out Tab
Revision 6.1 – February 18, 2015
11
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Rear View
A
C
D E
F
G
H
I
B
J
K LM
N
O
Legend
A.
B.
C.
D.
E.
F.
G.
H.
PCI Slots (Full-Height)
PCI Slots (Low-Profile)
Power Supply
AC Inlet
AC Power LED
USB Connectors
Data LAN Connectors
Management LAN Connector
NEC Corporation
I.
J.
K.
L.
M.
N.
O.
Serial Port Connector
VGA Connector
Dump (NMI) Switch
UID Button/LED
DC Power LED
PCI Slot (LAN Riser)
Additional Power Supply Slot
Revision 6.1 – February 18, 2015
12
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Dimensions (mm)
450 Watt or 800 Watt Power Supply Configuration
869.9
735.8
87.2
482.0
448.0
35.0
88.0
482.0
87.4
831.9 *
1000 Watt Power Supply Configuration
869.9
735.8
87.2
482.0
88.0
482.0
87.4
831.9 *
770.0
448.0
35.0
* Wthout back side parts of slide rails (in that case, cable arm cannot be attached)
NEC Corporation
Revision 6.1 – February 18, 2015
13
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Configuration Diagram
CHASSIS
REAR
2.5-inch
Drive Cage
LAN
Processor #1
6 DIMM
Slots
PCIe 3.0
PCI Riser
PCIe 3.0
RAID Slot
6 DIMM
Slots
Hot plug
Power Supply #1
Cooling
Fan
Processor #2
Minimum required components
Hot plug
Power
Supply #1
2 DIMM Slots
6 DIMM Slots
4 RAID BBU Slots
Cooling Fan
Optical Drive Bay
Media Bay
Optical
Drive Bay /
Media
Bay
Legend:
LAN Slot
Redundant Cooling Fan
8 2.5-inch
Drives
2.5-inch
Drive Cage
Hot plug
Power Supply #2
#3C
#2C
#1C
8 2.5-inch
Drives
6 DIMM
Slots
Hot plug
Power
Supply #2
CHASSIS
TOP
#2B
#1B
CHASSIS
FRONT
Standard components
Expansion Slots
#2B
#1B
#3C
#2C
#1C
#1D
#1A
Legend
Common
#1A
PCIe 3.0 x8, x8 connector, for a dedicated RAID controller
#1C
PCIe 3.0 x4, x8 connector, Low-profile, up to 220 mm length
#2C
PCIe 3.0 x4, x8 connector, Low-profile, up to 220 mm length
#3C
PCIe 3.0 x8, x16 connector, Full-height, up 220 mm length
#1D
PCIe 3.0 x8, x8 connector, for a flexible integrated NIC (LAN Riser)
#1B
PCIe 3.0 x8, x16 connector, Full-height, up to 220 mm length
#2B
PCIe 3.0 x8, x16 connector, Full-height, up to 312 mm length
PCIe x16
Riser Card
Kit
#1B
PCIe 3.0 x16, x16 connector, Full-height, up to 220 mm length
#2B
Not available
PCI-X Riser
Card Kit
#1B
PCIe 3.0 x8, x16 connector, Full-height, up to 220 mm length
#2B
64bit / 133 MHz / 3.3V PCI-X, Full-height, up to 312 mm length
PCI Riser
Card Kit
#1B
64bit / 33 MHz / 5V PCI, Full-height, up to 220 mm length
#2B
64bit / 33 MHz / 5V PCI, Full-height, up to 312 mm length
PCIe Riser
Card Kit
NOTE:

Up to 312 mm length card can be installed into slot #1B when N8116-28 Full Length PCI Card installation
Kit is installed.

The slot #3C is available in dual processor configuration.
NEC Corporation
Revision 6.1 – February 18, 2015
14
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Server Configuration
1 Base Models
Product Name / Description
Part Number
NEC Express5800/R120e-2M Server
no processor, no RAM, no HDD, no ODD, no PSU, no front bezel
Including:
2.5-inch Drive Cage, EXPRESSBUILDER DVD
N8100-2072F
NOTE:

The base model must be ordered with a processor kit.
2 Processors and Heat Sink
Available sockets: 2
Product Name / Description
Part Number
Processors
1 Processor
Required
Xeon E5-2609 v2 Processor Kit
Intel® Xeon ® Processor E5-2609 v2 (2.50 GHz, 4C/4T, 10 MB)
Xeon E5-2620 v2 Processor Kit
Intel® Xeon ® Processor E5-2620 v2 (2.10 GHz, 6C/12T, 15 MB)
Xeon E5-2630 v2 Processor Kit
Intel® Xeon ® Processor E5-2630 v2 (2.60 GHz, 6C/12T, 15 MB)
Xeon E5-2630L v2 Processor Kit
Intel® Xeon ® Processor E5-2630L v2 (2.40 GHz, 6C/12T, 15 MB)
Xeon E5-2637 v2 Processor Kit
Intel® Xeon ® Processor E5-2637 v2 (3.50 GHz, 4C/8T, 15 MB)
Xeon E5-2640 v2 Processor Kit
Intel® Xeon ® Processor E5-2640 v2 (2 GHz, 8C/16T, 20 MB)
Xeon E5-2650 v2 Processor Kit
Intel® Xeon ® Processor E5-2650 v2 (2.60 GHz, 8C/16T, 20 MB)
Xeon E5-2660 v2 Processor Kit
Intel® Xeon ® Processor E5-2660 v2 (2.20 GHz, 10C/20T, 25 MB)
Xeon E5-2670 v2 Processor Kit
Intel® Xeon ® Processor E5-2670 v2 (2.50 GHz, 10C/20T, 25 MB)
Xeon E5-2690 v2 Processor Kit
Intel® Xeon ® Processor E5-2690 v2 (3 GHz, 10C/20T, 25 MB)
Xeon E5-2695 v2 Processor Kit
Intel® Xeon ® Processor E5-2695 v2 (2.40 GHz, 12C/24T, 30 MB)
Xeon E5-2697 v2 Processor Kit
Intel® Xeon ® Processor E5-2697 v2 (2.70 GHz, 12C/24T, 30 MB)
Processor Heat Sink
st
For 1 Processor
N8101-675F
Processor Heat Sink
nd
For 2 Processor, including cooling fan kit
N8101-691F
Heat Sink
1st
2nd
N8101-676F
N8101-677F
N8101-678F
N8101-679F
N8101-680F
N8101-681F
N8101-682F
N8101-683F
N8101-684F
N8101-686F
N8101-685F
(Standard)
NOTE:

Minimum one processor kit from above must be installed.

The processors must be the same to configure dual processor system.

Do not disable Hyper-Threading technology when using processors with a small number of cores and
the system requires a lot of IO resources, in order to avoid performance down.
NEC Corporation
Revision 6.1 – February 18, 2015
15
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
The maximum number of logical processors supported by OS
See the table below for the maximum number of logical processors that you can actually use on your
system.
Number of Logical Processors Supported by Operating Systems
Microsoft Windows Server 2008 Standard
Microsoft Windows Server 2008 Enterprise
Microsoft Windows Server 2008 Standard (x64)
Microsoft Windows Server 2008 Enterprise (x64)
Microsoft Windows Server 2008 R2 Standard (x64)
Microsoft Windows Server 2008 R2 Enterprise (x64)
Microsoft Windows Server 2012 Standard
Microsoft Windows Server 2012 Datacenter
Microsoft Windows Server 2012 R2 Standard
Microsoft Windows Server 2012 R2 Datacenter
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
Red Hat Enterprise Linux 5 (EM64T)
Red Hat Enterprise Linux 6 (x86_64)
VMware ESXi 5.0 / 5.1
VMware ESXi 5.5
1
Maximum Available
Number of Logical
Processors
32
1
32
64
1
48
256
1
48
640
1
48
32
32
160
48
160
320
48
48
The maximum numbers of logical processors when using Hyper-V are below
- Windows Server 2008 : 24
- Windows Server 2008 R2 : 64
- Windows Server 2012, Windows Server 2012 R2 : 320
3 Memory
3.1
Memory Configuration
Refer to the section in accordance with your operating system and memory configuration:
Other OS than Windows Server 2008 Standard



Independent Channel: Refer to 3.2.1
Memory Sparing Configuration: Refer to 3.2.2
Memory Mirroring / Memory Lockstep Configuration: Refer to 3.2.3
Windows Server 2008 Standard


Independent Channel: Refer to 3.3.1
Memory Mirroring: Refer to 3.3.2
3.2
Other OS than Windows Server 2008 Standard
3.2.1
Independent Channel Configuration
Available slots: 12 per processor
Category
Product Name / Description
Part Number
Unbuffered DIMM
(UDIMM)
8GB DDR3-1600 UNB Memory Kit
2 x 4GB Unbuffered ECC DIMM, DDR3L-1600(PC3L-12800)
NOTE:
- Up to four sets (eight slots) per processor can be installed
- This DIMM does not support x4 SDDC.
N8102-534F
NEC Corporation
Revision 6.1 – February 18, 2015
16
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Registered
DIMM
(RDIMM)
1600
MHz
1866
MHz
Load Reduced DIMM
(LRDIMM)
8GB DDR3-1600 REG Memory Kit
2 x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
16GB DDR3-1600 REG Memory Kit
2 x 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
32GB DDR3-1600 REG Memory Kit
2 x 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
16GB DDR3-1866 REG Memory Kit
2 x 8GB Registered ECC DIMM, DDR3-1866(PC3-14900)
NOTE:
- Up to two sets (four slots) per processor can be installed
- Memory voltage is set to 1.5V automatically
- Not supported with the following processors: E5-2609 v2,
E5-2620 v2, E5-2630 v2, E5-2630L v2, and E5-2640 v2
N8102-537F
32GB DDR3-1866 REG Memory Kit
2 x 16GB Registered ECC DIMM, DDR3-1866(PC3-14900)
NOTE:
- Up to two sets (four slots) per processor can be installed
- Memory voltage is set to 1.5V automatically
- Not supported with the following processors: E5-2609 v2,
E5-2620 v2, E5-2630 v2, E5-2630L v2, and E5-2640 v2
N8102-546F
64GB DDR3-1600 LR Memory Kit
2 x 32GB Load Reduced ECC DIMM,
DDR3L-1600(PC3L-12800)
128GB DDR3-1333 LR Memory Kit
2 x 64GB Load Reduced ECC DIMM,
DDR3L-1333(PC3L-10600)
N8102-540F
N8102-538F
N8102-539F
N8102-545F
N8102-541F
NOTE:

Minimum one memory kit per processor must be installed.

It is recommended to install memory kits in multiples of two (four identical DIMMs) for quad-channel
symmetric memory configurations to increase memory transfer speed.

When two processors are installed, balance the DIMMs across the two processors.

Mix configurations of UDIMM/RDIMM(1600MHz)/RDIMM(1866MHz)/LRDIMM are not supported.
3.2.2
Memory Sparing Configuration
Available slots: 12 per processor
Product Name / Description
Part Number
12GB DDR3-1600 REG Memory Kit
3 x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
24GB DDR3-1600 REG Memory Kit
3 x 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
48GB DDR3-1600 REG Memory Kit
3 x 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-552
N8102-553
N8102-554
NOTE:




Minimum one memory kit per processor must be installed.
The configured memories must be identical.
When two processors are installed, balance the DIMMs across the two processors.
The logical memory capacity at the time of memory sparing becomes two-thirds of physical capacity
with configurations less than 8GB DIMM and five-sixth physical capacity with configurations more
than 16GB DIMM.
NEC Corporation
Revision 6.1 – February 18, 2015
17
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
3.2.3
Memory Mirroring / Memory Lockstep Configuration
Available slots: 12 per processor
Product Name / Description
Part Number
8GB DDR3-1600 REG Memory Kit
2 x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
16GB DDR3-1600 REG Memory Kit
2 x 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
32GB DDR3-1600 REG Memory Kit
2 x 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-548
N8102-549
N8102-550
NOTE:

Minimum one memory kit per processor must be installed.
3.3
Windows Server 2008 Standard
3.3.1
Independent Channel Configuration
Available slots: 1
Product Name / Description
Part Number
4GB DDR3-1600 REG Memory Kit
1 x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-582
NOTE:

Only one Memory Kit can be installed regardless of the number of processors.
3.3.2
Memory Mirroring Configuration
Available slots: 2
Product Name / Description
Part Number
8GB DDR3-1600 REG Memory Kit
2 x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-548
NOTE:

Only one Memory Kit (two DIMMs) can be installed regardless of the number of processors.
Memory Configuration Feature Comparison
See the table below for feature comparisons of memory configurations supported.
Independent
Channel
Memory
Sparing
Memory
Lockstep
Memory
Mirroring
Performance
Data Protection
Best
No
Better
Multiple single bit
error protection
Better
No
Redundancy
Data Correction
Available Memory
No
ECC, x4 SDDC
Full physical
memory
No
ECC, x8 SDDC
Full physical
memory
Available Memory
Channels
Notes
4
Partly
ECC, x4 SDDC
2/3 physical memory
(2, 4GB DIMM)
5/6 physical memory
(8, 16GB DIMM)
4
Good
Multiple single bit
and multi bit error
protection
Fully
ECC, x4 SDDC
Half physical
memory
4
4
All DIMMs in the
system must be
identical.
Paired DIMMs must
be identical.
Paired DIMMs must
be identical.
NEC Corporation
-
Revision 6.1 – February 18, 2015
18
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Maximum Memory Speed
See the table below for the actual maximum memory transfer speed in Independent Channel / Memory
Sparing Configuration.
DDR3 memory speed depends on the type of DIMMs, the native memory bus speed of the memory
controller and memory configuration. All memory buses operate at the clock frequency of the DIMM with
the lowest frequency.
Processor
Type
E5-2609 v2
# of DIMMs per
processor
Populated DIMMs
UDIMM: 4GB
1600 RDIMM: 4, 8, 16 GB
Up to 8 DIMMs
10 or more DIMMs
LRDIMM: 32GB
Up to 8 DIMMs
10 or more DIMMs
-
LRDIMM: 64GB
For Memory Sparing
E5-2620 v2
E5-2630 v2
E5-2630L v2
E5-2640 v2
UDIMM: 4GB
1600 RDIMM: 4, 8, 16 GB
Up to 8 DIMMs
10 or more DIMMs
LRDIMM: 32GB
Up to 8 DIMMs
10 or more DIMMs
-
LRDIMM: 64GB
For Memory Sparing
E5-2637 v2
E5-2650 v2
E5-2660 v2
E5-2670 v2
E5-2690 v2
E5-2695 v2
E5-2697 v2
UDIMM: 4GB
1600 RDIMM: 4, 8, 16 GB
Up to 8 DIMMs
10 or more DIMMs
1866 RDIMM: 8, 16 GB
LRDIMM: 32GB
Up to 8 DIMMs
10 or more DIMMs
-
LRDIMM: 64GB
For Memory Sparing
Memory Power
Setting
Low (1.35V)
Normal (1.5V)
Low (1.35V)
Normal (1.5V)
Low (1.35V)
Normal (1.5V)
Low (1.35V)
Normal (1.5V)
Low (1.35V)
Normal (1.5V)
Low (1.35V)
Normal (1.5V)
Low (1.35V)
Normal (1.5V)
Normal (1.5V)
Low (1.35V)
Normal (1.5V)
DIMM Speed
1333 MHz
1333 MHz
800 MHz
1066 MHz
1333 MHz
1066 MHz
1066 MHz
800 MHz
1066 MHz
1333 MHz
1600 MHz
1600 MHz
800 MHz
1066 MHz
1600 MHz
1066 MHz
1066 MHz
800 MHz
1066 MHz
1333 MHz
1600 MHz
1600 MHz
800 MHz
1066 MHz
1866MHz
1600 MHz
1066 MHz
1066 MHz
800 MHz
1066 MHz
NOTE:

Memory voltage is set to 1.5V automatically when installing DDR-1866 RDIMMs.
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
The maximum available memory is less than the maximum physical memory supported by your system
because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary
depending on the type and the number of PCI cards you are using.
Maximum Memory Size Supported by Operating Systems
Microsoft Windows Server 2008 Standard
1
Microsoft Windows Server 2008 Standard (x64)
NEC Corporation
4 GB
1
32 GB
Revision 6.1 – February 18, 2015
Maximum Available Memory
4 GB (HW-DEP enabled)
App. 2 GB(HW-DEP disabled)
32 GB
19
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
1
Microsoft Windows Server 2008 R2 Standard
1
Microsoft Windows Server 2008 Enterprise
1
Microsoft Windows Server 2008 Enterprise (x64)
1
Microsoft Windows Server 2008 R2 Enterprise
1
Microsoft Windows Server 2012 Standard
1
Microsoft Windows Server 2012 Datacenter
1
Microsoft Windows Server 2012 R2 Standard
1
Microsoft Windows Server 2012 R2 Datacenter
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
Red Hat Enterprise Linux 5 (EM64T)
Red Hat Enterprise Linux 6 (x86_64)
2
VMware ESXi 5.0 / 5.1
2
VMware ESXi 5.5
1
64 GB
2 TB
4 TB
16 GB
64 GB
1.5 TB
1.5 TB
16 GB
3 TB
1.5 TB
1 TB
3 TB
2 TB
4 TB
1 TB
1.5 TB
1.5 TB
1.5 TB
The maximum available memory size of Hyper-V systems are below:
- Windows Server 2008 Standard (x64) and Windows Server 2008 R2 Standard : 32 GB
- Windows Server 2008 Enterprise (x64) and Windows Server 2008 R2 Enterprise : 1TB
- Windows Server 2012, Windows Server 2012 R2:4 TB
Up to 1TB of main memory is available to each virtual machine.
2
4 Internal Hard Disk Drives
4.1
RAID Configuration
Refer to the section in accordance with your disk form factor and RAID configuration.
Up to eight 2.5-inch Drives
Available Interface
Non-RAID
Refer to 4.2.1
SATA
RAID 0/1/10
Refer to 4.2.2
SAS, SATA
512MB Cache
Refer to 4.2.3
SAS, SATA
1GB Cache /
Battery
Refer to 4.2.4
SAS, SATA
1GB Cache /
CacheVault
Refer to 4.2.5
SAS, SATA
RAID 5/6/50/60
Up to sixteen 2.5-inch Drives
Available Interface
Refer to 4.2.6
SAS, SATA
512MB Cache
Refer to 4.2.7
SAS, SATA
1GB Cache /
Battery
Refer to 4.2.8
SAS, SATA
1GB Cache /
CacheVault
Refer to 4.2.9
SAS, SATA
RAID 0/1/10
RAID 5/6
NOTE:
NEC Corporation
Revision 6.1 – February 18, 2015
20
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M






Up to four hard drives can be installed in the Embedded SATA configuration.
Hot plug insertion/removal are not supported in the Embedded SATA configuration.
All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed in each drive cage.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.
It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.
4.2
Internal Drive Configuration
4.2.1
Up to four Drives with Embedded SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4 x SATA ports
Internal SATA Cable
1 x mini-SAS to 1 x mini-SAS
2.5-inch Drive Cage
8 x 2.5-inch Hot-plug hard drive bays
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
(Standard)
Cable
Drive Cage
Drive
4 slots
available
SATA
HDD
(Standard)
(Standard)
N8150-356
N8150-357
N8150-358
NOTE:

Hot plug insertion/removal are not supported in the configuration.

The maximum transfer speed for Slot 2 and Slot 3 is 3 Gb/s.
4.2.2
Up to eight Drives with RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9272-8i
RAID 0/1/10, 512 MB, Int. 8, PCIe 3.0 x8, 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i/9272-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 2 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SASHDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
N8103-172
RAID BBU
Recommended
Cable
Drive Cage
Drive
8 slots
available
NEC Corporation
SAS
HDD
Revision 6.1 – February 18, 2015
N8103-153
(Standard)
(Standard)
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
21
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
SATA
HDD
SAS
SSD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
N8150-712
NOTE:

All drives within a RAID array should be of the same type, capacity and rotation speed.

Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed.
4.2.3
Up to eight Drives with RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 3.0 x8, 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i/9272-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 2 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SASHDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
N8103-173
RAID BBU
Recommended
Cable
Drive Cage
Drive
8 slots
available
SAS
HDD
SATA
HDD
SAS
NEC Corporation
Revision 6.1 – February 18, 2015
N8103-153
(Standard)
(Standard)
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
22
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8150-712
NOTE:

All drives within a RAID array should be of the same type, capacity and rotation speed.

Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.
4.2.4
Up to eight Drives with RAID 5/6 Controller with 1 GB Cache/Battery
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID 0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0 x8, 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i/9272-8i
MegaRAID CacheCade
for LSI MegaRAID SAS
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to
512 GB.
N8103-174
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 2 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SASHDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
(Standard)
RAID BBU
Recommended
SSD Caching
Recommended
Cable
Drive Cage
Drive
8 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
N8103-153
N8103-156
(Standard)
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
N8150-712
NOTE:
NEC Corporation
Revision 6.1 – February 18, 2015
23
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M



All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.
4.2.5
Up to eight Drives with RAID 5/6 Controller with 1 GB Cache/CacheVault
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9270CV-8i (with CV)
RAID0/1/5/6/10/50/60, 1GB Cahce, Int. 8ports, PCIe 3.0(x8),
6Gb/s, flash cache protection modules included
MegaRAID CacheCade
for LSI MegaRAID SAS
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to
512 GB.
N8103-168
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 2 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SASHDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
(Standard)
SSD Caching
Recommended
Cable
Required
Drive Cage
Drive
8 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
N8103-156
(Standard)
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
N8150-712
NOTE:

All drives within a RAID array should be of the same type, capacity and rotation speed.

Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.
NEC Corporation
Revision 6.1 – February 18, 2015
24
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
4.2.6
Up to sixteen Drives with RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9272-8i
RAID 0/1/10, 512MB, Int. 8, PCIe 3.0 x8, 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i/9272-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 6 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
2.5-Inch Hot Plug Drive Cage Kit
8 x 2.5-inch hot plug drive bays
Including six sets of 1 x mini-SAS to 1 x mini-SAS cable, SAS
expander card
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SASHDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8103-172
RAID BBU
Recommended
Cable
Drive Cage
Optional Drive Cage
Required
Drive
16 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
N8103-153
(Standard)
(Standard)
N8154-68
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
N8150-712
NOTE:

All drives within a RAID array should be of the same type, capacity and rotation speed.

Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed in each drive cage.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.
NEC Corporation
Revision 6.1 – February 18, 2015
25
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
4.2.7
Up to sixteen Drives with RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID0/1/5/6/10/50/60, 512MB, Int. 8, PCIe 3.0 x8, 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i/9272-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 6 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
2.5-Inch Hot Plug Drive Cage Kit
8 x 2.5-inch hot plug drive bays
Including six sets of 1 x mini-SAS to 1 x mini-SAS cable, SAS
expander card
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SASHDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
N8103-173
RAID BBU
Recommended
Cable
Drive Cage
Optional Drive Cage
Required
Drive
16 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
N8103-153
(Standard)
(Standard)
N8154-68
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
N8150-712
NOTE:

All drives within a RAID array should be of the same type, capacity and rotation speed.

Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed in each drive cage.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.
NEC Corporation
Revision 6.1 – February 18, 2015
26
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
4.2.8
Up to sixteen Drives with RAID 5/6 Controller with 1 GB Cache/Battery
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9272-8i
RAID 0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 3.0 x8, 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i/9272-8i
MegaRAID CacheCade
for LSI MegaRAID SAS
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to
512 GB.
N8103-174
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS,6 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
2.5-Inch Hot Plug Drive Cage Kit
8 x 2.5-inch hot plug drive bays
Including six sets of 1 x mini-SAS to 1 x mini-SAS cable, SAS
expander card
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SASHDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
(Standard)
RAID BBU
Recommended
SSD Caching
Recommended
Cable
Drive Cage
Optional Drive Cage
Required
Drive
16 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
N8103-153
N8103-156
(Standard)
N8154-68
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
N8150-712
NOTE:




All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs can be mixed in each
drive cage.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk of
becoming multiple hard drives failure during the RAID rebuilding process.
It is recommended to set RAID array configuration drives less than eight in order to minimize the risk of becoming multiple hard
drives failure.
NEC Corporation
Revision 6.1 – February 18, 2015
27
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
4.2.9
Up to sixteen Drives with RAID 5/6 Controller with 1 GB Cache/CacheVault
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9270CV-8i (with CV)
RAID0/1/5/6/10/50/60, 1GB Cache, Int. 8ports, PCIe 3.0(x8),
6Gb/s, flash cache protection modules included
MegaRAID CacheCade
for LSI MegaRAID SAS
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to
512 GB.
N8103-168
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS,6 sets
2.5-inch Drive Cage
8 x 2.5-inch hot plug drive bays
2.5-Inch Hot Plug Drive Cage Kit
8 x 2.5-inch hot plug drive bays
Including six sets of 1 x mini-SAS to 1 x mini-SAS cable, SAS
expander card
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
1.2TB HDD 10K Hot Plug 2.5-inch SAS HDD
1x 1.2TB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
450GB 15K Hot Plug 2.5-inch SAS HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
600GB 15K Hot Plug 2.5-inch SAS HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
(Standard)
SSD Caching
Recommended
Cable
Drive Cage
Optional Drive Cage
Required
Drive
16 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
N8103-156
(Standard)
N8154-68
N8150-301B
N8150-322B
N8150-304B
N8150-332B
N8150-408B
N8150-303B
N8150-331B
N8150-442
N8150-443
N8150-356
N8150-357
N8150-358
N8150-711
N8150-712
NOTE:

All drives within a RAID array should be of the same type, capacity and rotation speed.

Up to two kinds of drives selected from SAS 10K HDDs, SAS 15K HDDs, SATA HDDs and SAS SSDs
can be mixed in each drive cage.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.
NEC Corporation
Revision 6.1 – February 18, 2015
28
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
5 Optical Drive
Category
Product Name / Description
Part Number
Internal
1 slot available
Internal Slim DVD-ROM drive
Slim DVD-ROM drive
DVD read speed: 8x (DVD-ROM / DVD-R / DVD-RW)
CD read speed: 24x (CD-ROM / CD-R/RW)
Internal DVD Super Multi Drive
Slim DVD Super Multi drive, not including writing software
DVD Read speed: 8x (DVD-R / DVD-RW / DVD-R DL / DVD+R /
DVD+RW / DVD+R DL / DVD-ROM)
DVD-RAM read speed: 5x
CD read speed: 24x (CD-ROM / CD-R/RW)
External DVD-ROM drive
DVD-ROM drive, Bus powered, 1.2 A required
DVD Read speed: 4x (DVD-ROM / DVD-R / DVD-RW)
CD read speed: 12x (CD-ROM / CD-R/RW)
N8151-122
External
N8151-107F
N8160-91
NOTE:

Up to 1 optical drive can be connected.
6 Internal RDX Drive
6.1
RDX Configuration
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port
Internal USB cable
1 x Internal USB to 1 x USB device
(Standard)
Internal RDX (USB)
N8151-105
Cable
Drive
1 bay available
K410-264(00)
7 PCI Riser Card / PCI Card
Please refer to Supported PCI Cards and Installable Slots with regard to the position of PCI slot which
can mount PCI card supported.
7.1
PCI Riser Card
Product Name / Description
Part Number
PCIe Riser Card Kit
2 x PCIe 3.0 x8
PCIe x16 Riser Card Kit
1 x PCIe 3.0 x16
PCI-X Riser Card Kit
1 x 64-bit/133 MHz PCI-X, 1x PCIe 3.0 x8
PCI Riser Card Kit
2x 64-bit/33 MHz PCI (5V)
NOTE:
The riser card is make-to-order product. Please consult our sales representative in regard
to production lead time.
The card is not supported on VMware ESXi systems.
(Standard)
NEC Corporation
Revision 6.1 – February 18, 2015
N8116-25
N8116-26
N8116-27
29
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
7.2
Full Length PCI Card installation Kit
For a full-length PCI card (D=312mm/12.28 in) installation in PCI Slot #1B
Product Name / Description
Part Number
Full Length PCI Card installation Kit
For a full-length installation, contains special heat sinks
N8116-28
NOTE:

Obtain the graphics card installation kit in addition to this product when to install graphics board.

Since this product is make-to-order manufacturing, the support is provided individually. Contact our
sales representative for details.
7.3
Graphics Card Installation Kit
For an installation of the video card which is used for Microsoft RemoteFX
Product Name / Description
Part Number
Graphics Card Installation Kit
Power cables for video card (six-pin), a retainer to secure the graphics card
N8116-29
NOTE:

Since this product is make-to-order manufacturing, the support is provided individually. Contact your
sales representative for details.

This product does not support/guarantee installation of general video cards on R120e-2M.
7.4
Network Interface Controller
Category
Riser
1GbE
10GbE
Adapter
NEC Corporation
1GbE
Product Name / Description
Part Number
Dual Port 1000BASE-T Riser Card
Broadcom® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x8
Dual Port 10GBASE-T Riser Card
Broadcom® BCM57810 Converged Controller
PCIe 2.0 x8
NOTE:
- Jumbo frame is not supported on Redhat Enterprise Linux 6
(x86) operating systems.
Dual Port 10GBASE SFP+ Riser Card
Broadcom® BCM57810 Converged Controller
PCIe 3.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to two SFP+ Modules can be installed.
- Supports up to four adapters of 10Gb Network Adapter on any
supported operating systems, excluding 32 bit operating
system.
- Up to two 10Gb Network Adapter on Windows Server 2008(x86)
and Red Hat Enterprise Linux 5(x86), up to one 10G Network
Adapter on Red Hat Enterprise Linux 6(x86).
- Jumbo frame is not supported on Redhat Enterprise Linux 6
(x86) operating systems.
N8104-135
1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
N8104-138
Revision 6.1 – February 18, 2015
N8104-136
N8104-137
N8104-132
30
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
10GbE
SFP+
Module
Dual Port 1000BASE-T Adapter
Intel® 82580 Gigabit Ethernet Controller
PCIe 2.0 x4
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
- Up to two adapters only can be installed in a dual processor
configuration with Xeon E5-2609 v2.
N8104-145
10GBASE Adapter (SFP+/2ch)
Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port
Network Interface Card
PCIe 2.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to 2 SFP+ Modules can be installed.
- Supports up to four adapters of 10Gb Network Adapter on any
supported operating systems, excluding 32 bit operating
system.
- Up to two 10Gb Network Adapter on Windows Server 2008(x86)
and Red Hat Enterprise Linux 5(x86), up to one 10G Network
Adapter on Red Hat Enterprise Linux 6(x86).
10GBASE Adapter (SFP+/2ch)
Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port
Network Interface Card
PCIe 2.0 x8
NOTE:
- Not supported in a configuration with Xeon E5-2609 v2
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to 2 SFP+ Modules can be installed.
- Supports up to four adapters of 10Gb Network Adapter on any
supported operating systems, excluding 32 bit operating
system.
- Up to two 10Gb Network Adapter on Windows Server
2008(x86) and Red Hat Enterprise Linux 5(x86), up to one 10G
Network Adapter on Red Hat Enterprise Linux 6(x86).
Dual Port 10GBASE-T Adapter
Intel X540
PCIe 2.0(x8)
SFP+ Module (10G-SR)
1 x SFP+ Module for N8104-128/-137/-149
N8104-128
N8104-133
N8104-149
N8104-153
N8104-129
NOTE:

Supports up to two adapters of 10Gb Converged Network Adapter and 10Gb Network Adapter on
Windows Server 2008(x86) and Red Hat Enterprise Linux 5(x86), and up to one on Red Hat
Enterprise Linux 6(x86). For other operating systems, up to four 10Gb adapters can be installed.

Network performance may be reduced depending on the applications and memory performance when
three or more 10Gb Network Adapters are installed.
NEC Corporation
Revision 6.1 – February 18, 2015
31
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
NIC Teaming feature – NIC Teaming and bonding features
See the table below for supported network interfaces and OS combinations.
Windows Server 2008 supports BASP (Broadcom Advanced Server Program) or Intel PROSet teaming
while Windows Server 2012 and Linux support teaming with bonding function supported by OS.
Network Interface
Team
Operating Systems
1GbE NIC
Embedded 1GbE NIC and
N8104-135/-138/-132/-133
Up to four teams per one system
Up to four ports per one team
1GbE NIC
N8104-145
Up to four teams per one system
Up to four ports per one team
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux 5.9 or later
Red Hat Enterprise Linux 6.4 or later
Red Hat Enterprise Linux 7.0 or later
Windows Server 2008
Windows Server 2008 R2
10GbE NIC
N8104-128/137
Up to three teams per one system
Up to four ports per one team
10GbE NIC
N8104-149
10GbE NIC
N8104-136
Up to one teams per one system
Up to two ports per one team
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux 5.9 or later
Red Hat Enterprise Linux 6.4 or later
Red Hat Enterprise Linux 7.0 or later
Windows Server 2008(x86)
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux 6.5 or later
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux 5.9 or later
Red Hat Enterprise Linux 6.4 or later
Red Hat Enterprise Linux 7.0 or later
NOTE:

NIC Teaming feature is not supported on iSCSI interfaces.

The network interfaces for teaming must be the same.

When 10GbE and 1GbE NIC teaming are mixed, the teams must be up to four per one system.
Using iSCSI
See the table below for supported network interfaces and operating system combinations.
Category
Network Interface
Operating Systems
1GbE
Embedded 1GbE NIC
Windows Server 2008 R2, Windows Server 2012, Windows Server 2012
R2, Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
Windows Server 2008 R2, Windows Server 2012, Windows Server 2012
R2, Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
Windows Server 2008 R2, Windows Server 2012, Windows Server 2012
R2, Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
Windows Server 2008 R2, Windows Server 2012, Windows Server 2012
R2, Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
Windows Server 2008 R2, Windows Server 2012, Windows Server 2012
R2, Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
Windows Server 2008, Windows Server 2008 R2, Windows Server 2012,
Windows Server 2012 R2, Red Hat Enterprise Linux 5, Red Hat Enterprise
Linux 6, VMware
Windows Server 2008 R2, Windows Server 2012, Windows Server 2012
N8104-138
N8104-132
N8104-133
N8104-135
10GbE
N8104-128
N8104-137
NEC Corporation
Revision 6.1 – February 18, 2015
32
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
R2, Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6, VMware
Windows Server 2008 R2 / Windows Server 2012 / Windows Server 2012
R2 / Red Hat Enterprise Linux 6.5 or later / VMware
N8104-149
NOTE:

NIC Teaming feature is not supported on iSCSI interfaces.
7.5
InfiniBand
Category
Product Name / Description
Part Number
Controller
Single Port InfiniBand Adapter
Mellanox ConnectX-3 VPI, MCX353A-FCBT,
FDR, PCIe 3.0(x8)
NOTE:
- For using this product in Windows Server 2012 R2
environment, download the driver from the NEC website.
Dual Port InfiniBand Adapter
Mellanox ConnectX-3 VPI, MCX354A-FCBT,
FDR, PCIe 3.0(x8)
NOTE:
- For using this product in Windows Server 2012 R2
environment, download the driver from the NEC website.
N8104-146
InfiniBand Cable 2m/FRD
Copper
InfiniBand Cable 3m/FDR
Copper
InfiniBand Switch 36 ports/FDR
Mellanox MSX6036F-1SFR
36 ports, FDR, One power supply module included, no power
cord
Redundant Power Supply Unit
Power supply module for 36 ports InfiniBand switch, no power
cord
K410-304(02)
Cable
Switch
Unit
Power
Supply
N8104-147
K410-304(03)
NE3707-061
NE3707-063
NOTE:

Up to two InfiniBand adapters can be installed into the system and two adapters should be of the
same type.

The InfiniBand adapters and other options are make-to-order products. Please consult your sales
representative in regards to production lead time.
7.6
PCIe SSD Adapter
Category
Product Name / Description
Part Number
PCIe SSD
PCIe SSD Adapter 365GB
Fusion-io ioDrive2 365GB
PCIe 2.0(x4), Low Profile / Full Height
N8118-01
NOTE:

Server Core is not supported

Warranty period is the shorter of 3 years (37 months) or until the total bytes of written value (PBW)
exceeds 4 PB. Check the PBW periodically with the utility for the PCIe SSD adapter.

At least 8GB of memory per one PCIe SSD Adapter is required for adequate performance with this
product. Refer to the user's guide for details.

Operating system can not be installed in this product.
NEC Corporation
Revision 6.1 – February 18, 2015
33
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
7.7
External Storage Controller
7.7.1
RAID Controller
Category
Product Name / Description
Part Number
Controller
RAID Controller (1GB, RAID0/1/5/6)
LSI MegaRAID SAS 9286CV-8e
RAID0/1/5/6/10/50/60, 1GB, Ext. 8, PCIe 3.0 x8, SAS 6Gb/s,
SATA 6Gb/s, flash cache protection modules included
N8103-161
NOTE:

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.
Types and Number of Available RAID Controllers when Running with VMware ESXi
See the table below for the types and number of available RAID Controllers when running with VMware
ESXi.
The condition depends on interrupt processes managed by the operating system and insufficient interrupt
resources may lead to system failure.
Processor
Type
E5-2609 v2
E5-2620 v2
E5-2630 v2
E5-2630L v2
E5-2637 v2
E5-2640 v2
E5-2650 v2
E5-2660 v2
E5-2670 v2
E5-2690 v2
E5-2695 v2
E5-2697 v2
7.7.2
Number of
available
controllers
Controller Type
Total Number of
available
controllers
N8103-176 RAID Controller (1 GB, RAID 0/1)
N8103-177 RAID Controller (1 GB, RAID 0/1/5/6)
N8103-178 RAID Controller (2 GB,RAID 0/1/5/6)
N8103-179 RAID Controller (2 GB,RAID 0/1/5/6)
Up to one controller
Up to three controllers
N8103-172 RAID Controller (512MB, RAID 0/1)
N8103-173 RAID Controller (512MB, RAID 0/1/5/6)
N8103-174 RAID Controller (1GB, RAID 0/1/5/6)
N8103-168 RAID Controller (1GB, RAID 0/1/5/6)
N8103-161 RAID Controller (1GB, RAID 0/1/5/6)
N8103-172 RAID Controller (512MB, RAID 0/1)
N8103-173 RAID Controller (512MB, RAID 0/1/5/6)
N8103-174 RAID Controller (1GB, RAID 0/1/5/6)
N8103-168 RAID Controller (1GB, RAID 0/1/5/6)
N8103-161 RAID Controller (1GB, RAID 0/1/5/6)
Up to one controller
Up to two controllers
Up to one controller
Up to one controller
Up to one controller
Up to two controllers
Fibre Channel / SAS Controller
Category
Product Name / Description
Part Number
Fibre Channel
Fibre Channel Controller (1ch)
Emulex LightPulse LPe1250-F8 Host Bus Adapter
8Gb/s, Optical, PCIe 2.0 x8
Fibre Channel Controller (2ch)
Emulex LightPulse LPe12002-M8 Host Bus Adapter
8Gb/s, Optical, PCIe 2.0 x8
Fibre Channel Controller (1ch)
Emulex LightPulse LPe16000B-M6 Host Bus Adapter
16Gb/s, Optical, PCIe 3.0 x8
Fibre Channel Controller (2ch)
Emulex LightPulse LPe16002B-M6 Host Bus Adapter
16Gb/s, Optical, PCIe 3.0 x8
NOTE:
N8190-153
NEC Corporation
Revision 6.1 – February 18, 2015
N8190-154
N8190-157
N8190-158A
34
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
- Not supported in a single processor configuration with Xeon
E5-2403 v2/-2407 v2
SAS
SAS Controller
LSI SAS9212-4i4e Host Bus Adapter
6Gb/s SAS, Int. 4(7-pin SATA ) / ext. 4(SFF-8088), PCIe
2.0(x8), Low Profile / Full Height
NOTE:
- For using this product in Windows Server 2012 R2
environment, download the driver from the NEC website.
SAS Controller
LSI SAS9300-8e Host Bus Adapter
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0 x8
N8103-142
N8103-184
NOTE:

Up to two 16Gb/s Fiber Channel Controller can be installed.

Up to three SAS Controller can be installed.
7.8
Serial Port Adapter
Product Name / Description
Part Number
Serial Port Adapter
Serial port fixed to PCI bracket
N8117-01A
NOTE:

Up to one Serial Port Adapter can be installed.
8 Other Add-in Components
8.1
Power Supply Module
Product Name / Description
Part Number
450W Hot Plug Power Supply
1 x 450 Watt 80 PLUS® Platinum
800W Hot Plug Power Supply
1 x 800 Watt 80 PLUS® Platinum
800W Hot Plug Power Supply
1 x 800 Watt 80 PLUS® Titanium
NOTE:
- The power supply only supports 200-240VAC input.
N8181-86F
1000W Hot Plug Power Supply
1 x 1000 Watt 80 PLUS® Platinum
N8181-88F
N8181-87F
N8181-118F
NOTE:

The power units must be the same to configure redundancy.

Use the NEC Power Supply Selector to select appropriate size for power units. For details, please
visit the NEC website at:
http://www.nec.com/en/global/prod/express/collateral/tools/PowerSelector_G01.xls
8.2
Redundant Fan Kit
Product Name / Description
Part Number
Redundant Fan Kit
5 hot plug redundant cooling fans for R120e-2M
N8181-119
8.3
Trusted Platform Module Kit
Product Name / Description
Part Number
Trusted Platform Module Kit
TPM 1.2 module
N8115-19
NOTE:
NEC Corporation
Revision 6.1 – February 18, 2015
35
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M




The kit is not available in China.
The kit is not removable after attachment.
"TPM Support" in BIOS setup menu must be activated prior to use of this kit.
To use Windows BitLocker drive encryption, be sure to keep the "recovery password" of BitLocker
function. The recovery password is required to restore data for hardware replacement during a
system error.
8.4
Internal Flash Memory
Available socket: 1
Product Name / Description
Part Number
Internal Flash Memory
Internal flash memory to enable software and tools in the EXPRESSBUILDER DVD
without DVD media
NOTE:
Before use, software and tools must be copied from the EXPRESSBUILDER DVD to the
flash memory.
The following operations can be performed with the flash memory:
- Installation of Windows server with express setup
- Installation of Starter Pack—the package of NEC qualified drivers and system setting
tools
- Installation of NEC ESMPRO Agent and Universal RAID Utility
- Performance of the Test and Diagnosis Tool
N8115-07
8.5
Flash FDD
Choose the Flash FDD if you need to prepare an alternative device for a floppy drive.
Product Name / Description
Part Number
Flash FDD
USB flash emulating USB floppy disk, Native capacity 1.44 MB
N8160-96
NOTE:

Up to one drive can be connected.
8.6
Front Bezel
Product Name / Description
Part Number
Front Bezel
Front bezel for R120e-2M
N8146-46F
9 Add-on Components
9.1
17-inch LCD Console Drawer
Category
Drawer
w/ KVM
Drawer
Cable
NEC Corporation
Product Name / Description
Part Number
17-inch LCD Console Drawer (8port)
17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port
KVM switch, 1U height
Switch Unit Connection Cable Set (USB, 1.8m)
1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB, 3m)
3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB, 5m)
5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
N8143-77F
Revision 6.1 – February 18, 2015
K410-118(1A)
K410-118(03)
K410-118(05)
36
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Drawer
Drawer
w/o KVM
Keypad
17inch LCD Console Unit 1U
17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height,
4-pin USB B to 4-pin USB A cable 2 m, PS/2 Y-splitter cable
2m, 15-pin mini D-sub VGA cable 2 m
17inch LCD Console Drawer (1port)
17-inch LCD, US 103-keys Keyboard with 10-key, Touch pad
with 3-button, 1U height, 4-pin USB B to 4-pin USB A cable 1.8
m, Two PS/2 cable 1.8 m, 15-pin mini D-sub VGA cable 1.8 m
Keyboard Unit (JP)
JP 108-keys Keyboard with 10-key for N8143-84F 17inch LCD
Console Drawer (1port)
Keyboard Unit (UK)
UK 104-keys Keyboard with 10-key, for N8143-84F 17inch LCD
Console Drawer (1port)
N8143-76F
N8143-84F
N8143-85
N8143-87
NOTE:

There are two VGA connectors on R120e-2M, one on the front side and one on the rear side.
However, the front side only works when both are connected at the same time.
9.2
KVM Switch
Category
Product Name / Description
Part Number
KVM Switch
Server Switch Unit (8 server)
1U USB 8 port KVM switch
N8191-12F
Switch Unit Connection Cable Set (USB,1.8m)
1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB,3m)
3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB,3m)
5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable 1.8 m
1.8 m, 1 x 15-pin mini D-sub - 1x 15-pin mini D-Sub / 2x PS/2
K410-118(1A)
Cable
KVM
Cascading
K410-118(03)
K410-118(05)
K410-119(1A)
NOTE:

There are two VGA connectors on R120e-2M, one on the front side and one on the rear side.
However, the front side only works when both are connected at the same time.
9.3
Cable Management Arm
Product Name / Description
Part Number
Cable Management Arm 2U Kit
For R120e-2M
N8143-95
9.4
Server Management License
The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the
standard management features. For more extensive remote KVM and remote media features, choose the
following kit.
Product Name / Description
Part Number
Remote KVM and Media License Kit
N8115-04
License for one server.
Remote KVM and remote media are enabled regardless of OS status.
Remote KVM:
Displays a graphics console on the web browser of the remote terminal
(PC/server).
Controls keyboard and mouse via the remote terminals' web browser
NEC Corporation
Revision 6.1 – February 18, 2015
37
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Remote media:
Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals
(PC/server) as if accessing the local drives.
NOTE: Remote KVM and remote media features are not available for virtual machines.
9.5
Medium and Cartridge
Category
RDX
HDD
SSD
NEC Corporation
Product Name
Drive supported
Part Number
RDX Cartridge (320GB)
RDX Cartridge (500GB)
RDX Cartridge (1TB)
RDX Cartridge (2TB)
RDX Cartridge (SSD/128GB)
RDX Cartridge (SSD/256GB)
N8151-105
N8151-105
N8151-105
N8151-105
N8151-105
N8151-105
N8153-01
N8153-02
N8153-03
N8153-08
N8153-06
N8153-07
Revision 6.1 – February 18, 2015
38
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
References
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
Hardware
monitoring
Boot monitoring
Alerting
Remote KVM
(via LAN)
Remote control
(via LAN)
Others
Remote wakeup
Centralized
management
Industry standard
1
2
3
4
Temperature/voltage/power/standard
LAN/fan/degeneration (memory/hard
drive)
Hardware event log collection
With Remote KVM
and Media License
kit




Booting, BIOS/POST stall, OS stall,
shutdown
HW error, Boot error and OS panic
(by SNMP, E-Mail)
POST/BIOS setup, DOS utility
Panic screen, Boot screen
Text-based screen (OS console)
GUI-based screen (OS console)
Remote console recording
Remote reset/power on-off/ dump
OS shutdown
Remote media (CD/DVD/FD)
Server Management Command Line
Protocol (DMTF compliant)
Remote control via Web browser
(without dedicated app)
Remote batch
Scheduling (without UPS)
Set automatic IP address via DNS/DHCP
Wake On LAN, Wake On Ring
Monitoring and control of multiple servers




 



 



IPMI
2.0
2.0
2
 
2
 
2
 

1
 







1
 






1
1
The feature is not supported on VMware ESXi systems.
The optional serial port is not available for the feature.
Monitoring boot screens is not supported on VMware systems.
In VMware systems, only the direct console user interface is supported.
NEC Corporation
Revision 6.1 – February 18, 2015
39
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
OS Support Matrix for PCI Cards and Embedded Controllers
Product Name
N8103-172
N8103-173
N8103-174
N8103-168
N8103-161
N8103-142
N8103-184
N8190-153
N8190-154
N8190-157
N8190-158
N8104-135
N8104-138
N8104-132
N8104-133
N8104-145
N8104-136
N8104-137
N8104-128
N8104-149
N8104-153
N8104-146
N8104-147
N8118-01
Embedded SATA non-RAID Controller
Embedded 1GbE NIC
RAID Controller (512 MB, RAID 0/1)
RAID Controller (512 MB, RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
SAS Controller
SAS Controller
Fibre Channel Controller
Fibre Channel Controller (2ch)
Fibre Channel Controller
Fibre Channel Controller (2ch)
Dual Port 1000BASE-T Riser Card
1000BASE-T adapter
Dual Port 1000BASE-T Adapter
Quad Port 1000BASE-T Adapter
Dual Port 1000BASE-T Adapter
Dual Port 10GBASE-T Riser Card
Dual Port 10GBASE SFP+ Riser Card
10GBASE adapter (SFP+/2ch)
10GBASE adapter (SFP+/2ch)
Dual Port 10GBASE-T Adapter
Single Port InfiniBand Adapter
Dual Port InfiniBand Adapter
PCIe SSD Adapter 365GB
NEC Corporation
ESXi 5.0
ESXi 5.1
ESXi 5.5
RHEL 5 x64
RHEL 5
RHEL 6 x64
RHEL 6
RHEL 7
WS 2008 x64
WS 2008
WS 2008 R2
WS 2012
WS 2012 R2
Part number







- - 
- - - - - - - - - - 
- 
- - - - - - - - - - - - - - 



- 



- - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - -
Revision 6.1 – February 18, 2015
40
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Supported PCI Cards and Installable Slots
Standard Riser Card
Slots
Part Number
Product Name
#1A
#1B
#2B
#1C
#2C
#3C 1 #1D
















-






-
3
 










-


3
 


















2
N8103-172
N8103-173
N8103-174
N8103-168
N8103-161
N8103-142
N8103-184
N8190-153
N8190-154
N8190-157
N8190-158
N8104-135
N8104-138
N8104-132
N8104-145
N8104-133
N8104-136
N8104-137
N8104-128
N8104-149
N8104-153
N8104-146
N8104-147
N8118-01
N8117-01A
1
2
3
RAID Controller (512 MB, RAID 0/1)
RAID Controller (512 MB, RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
SAS Controller
SAS Controller
Fibre Channel Controller
Fibre Channel Controller (2ch)
Fibre Channel Controller
Fibre Channel Controller (2ch)
Dual Port 1000BASE-T Riser Card
1000BASE-T adapter
Dual Port 1000BASE-T Adapter
Dual Port 1000BASE-T Adapter
Quad Port 1000BASE-T Adapter
Dual Port 10GBASE-T Riser Card
Dual Port 10GBASE SFP+ Riser Card
10GBASE adapter (SFP+/2ch)
10GBASE adapter (SFP+/2ch)
Dual Port 10GBASE-T Adapter
Single Port InfiniBand Adapter
Dual Port InfiniBand Adapter
PCIe SSD Adapter 365GB
Serial Port Adapter



-

















-



-
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available in up to sixteen drives configuration
NEC Corporation
Revision 6.1 – February 18, 2015
41
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
N8116-25 PCIe x16 Riser Card Kit
Slots
Part Number
N8103-172
N8103-173
N8103-174
N8103-168
N8103-161
N8103-142
N8103-184
N8190-153
N8190-154
N8190-157
N8190-158
N8104-135
N8104-138
N8104-132
N8104-145
N8104-133
N8104-136
N8104-137
N8104-128
N8104-149
N8104-153
N8104-146
N8104-147
N8118-01
N8117-01A
1
2
3
Product Name
RAID Controller (512 MB, RAID 0/1)
RAID Controller (512 MB, RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
SAS Controller
SAS Controller
Fibre Channel Controller
Fibre Channel Controller (2ch)
Fibre Channel Controller
Fibre Channel Controller (2ch)
Dual Port 1000BASE-T Riser Card
1000BASE-T adapter
Dual Port 1000BASE-T Adapter
Dual Port 1000BASE-T Adapter
Quad Port 1000BASE-T Adapter
Dual Port 10GBASE-T Riser Card
Dual Port 10GBASE SFP+ Riser Card
10GBASE adapter (SFP+/2ch)
10GBASE adapter (SFP+/2ch)
Dual Port 10GBASE-T Adapter
Single Port InfiniBand Adapter
Dual Port InfiniBand Adapter
PCIe SSD Adapter 365GB
Serial Port Adapter
#1A
#1B
#1C
#2C
#3C 1
3
 





















-

-






-
3
 









-
-
-


#1D



-
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available in up to sixteen drives configuration
NEC Corporation
Revision 6.1 – February 18, 2015
42
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
N8116-26 PCI-X Riser Card Kit
Slots
Part Number
N8103-172
N8103-173
N8103-174
N8103-168
N8103-161
N8103-142
N8103-184
N8190-153
N8190-154
N8190-157
N8190-158
N8104-135
N8104-138
N8104-132
N8104-145
N8104-133
N8104-136
N8104-137
N8104-128
N8104-149
N8104-153
N8104-146
N8104-147
N8118-01
N8117-01A
1
2
3
Product Name
RAID Controller (512 MB, RAID 0/1)
RAID Controller (512 MB, RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
SAS Controller
SAS Controller
Fibre Channel Controller
Fibre Channel Controller (2ch)
Fibre Channel Controller
Fibre Channel Controller (2ch)
Dual Port 1000BASE-T Riser Card
1000BASE-T adapter
Dual Port 1000BASE-T Adapter
Dual Port 1000BASE-T Adapter
Quad Port 1000BASE-T Adapter
Dual Port 10GBASE-T Riser Card
Dual Port 10GBASE SFP+ Riser Card
10GBASE adapter (SFP+/2ch)
10GBASE adapter (SFP+/2ch)
Dual Port 10GBASE-T Adapter
Single Port InfiniBand Adapter
Dual Port InfiniBand Adapter
PCIe SSD Adapter 365GB
Serial Port Adapter
#1A
#1B
#2B
#1C
#2C
#3C 1
#1D



-











-
3
 











-
3
 











-






-



-
-


-






-







-
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available in up to sixteen drives configuration
NEC Corporation
Revision 6.1 – February 18, 2015
43
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
N8116-27 64-bit PCI Riser Card Kit
Slots
Part Number
N8103-172
N8103-173
N8103-174
N8103-168
N8103-161
N8103-142
N8103-184
N8190-153
N8190-154
N8190-157
N8190-158
N8104-135
N8104-138
N8104-132
N8104-145
N8104-133
N8104-136
N8104-137
N8104-128
N8104-149
N8104-153
N8104-146
N8104-147
N8118-01
N8117-01A
1
2
3
Product Name
RAID Controller (512 MB, RAID 0/1)
RAID Controller (512 MB, RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
RAID Controller (1 GB,RAID 0/1/5/6)
SAS Controller
SAS Controller
Fibre Channel Controller
Fibre Channel Controller (2ch)
Fibre Channel Controller
Fibre Channel Controller (2ch)
Dual Port 1000BASE-T Riser Card
1000BASE-T adapter
Dual Port 1000BASE-T Adapter
Dual Port 1000BASE-T Adapter
Quad Port 1000BASE-T Adapter
Dual Port 10GBASE-T Riser Card
Dual Port 10GBASE SFP+ Riser Card
10GBASE adapter (SFP+/2ch)
10GBASE adapter (SFP+/2ch)
Dual Port 10GBASE-T Adapter
Single Port InfiniBand Adapter
Dual Port InfiniBand Adapter
PCIe SSD Adapter 365GB
Serial Port Adapter
#1A
#1B
#2B
#1C
#2C
#3C 1
#1D



-
-
-






-
3
 










-



-
-
-
-


3
 


















-
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available in up to sixteen drives configuration
NEC Corporation
Revision 6.1 – February 18, 2015
44
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Copyright Notice and Liability Disclaimer
The information contained herein is subject to change without notice.
Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries
Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
Linux is a trademark of Linus Torvalds.
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
All other products, brands, or trade names used in this document are trademarks or registered trademarks
of their respective holders.
NEC shall not be liable for technical or editorial errors or omissions contained herein.
For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
NEC Corporation
Revision 6.1 – February 18, 2015
45
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
Revision History
Revision
Date
Description
6.1
February 18, 2015
6.0
January 28, 2015
5.1
November 21, 2014
5.0
October 16, 2014
4.0
July 18, 2014
3.0
January 16, 2014
2.0
October 25, 2013
Others:
Added note to configure with VMware Systems
New products added:
SAS Controller / N8103-184
Part number changed:
Flash FDD / N8160-96
Others:
Supported N8104-153 Dual Port 10GBASE-T Adapter on Windows Server
2012 and Windows Server 2012 R2
New products added:
10GBASE Adapter (SFP+/2ch) / N8104-149
PCIe SSD Adapter 365GB / N8118-01
Part number changed:
Fibre Channel Controller (2ch) / N8190-158A
Discontinued product deleted:
Dual Port 10Gb Converged Network Adapter / N8104-131
RDX Cartridge (1.5TB) / N8153-04
Others:
Added Red Hat Linux 7 to the list of operating system supported
Updated OS support matrix
New products added:
450GB 15K Hot Plug 2.5-inch SAS HDD / N8150-442
600GB 15K Hot Plug 2.5-inch SAS HDD / N8150-443
Dual Port 10GBASE-T Adapter / N8104-153
RDX Cartridge (2TB) / N8153-08
Discontinued products removed:
Internal DAT (USB) / N8151-78A
Others:
Updated the Specification table (Regulatory and Safety)
SAS HDD part numbers changed (added “B”)
Added configuration limitations for N8190-157/158 and N8104-133
Added a note for processors
Updated the Maximum Memory Speed matrix
Updated notes for 10Gb Network Adapters
WS2012 R2 is added in the supported OS for iSCSI
Added a note for InfiniBand Adapter
Added Graphics Card Installation Kit / N8116-29
WS2012 R2 is supported with N8103-142 SAS Controller
Added a note for VGA connectors
New products added:
800W Hot Plug Power Supply / N8181-118F
RDX Cartridge (SSD/128G) / N8153-06
RDX Cartridge (SSD/256GB) / N8153-07
Part number changed:
Internal Slim DVD-ROM Drive / N8151-122
Others:
Added Windows Server 2012 R2 and Red Hat Linux 5.9 to the list of operating
system supported
Updated OS support matrix
New products added:
Single Port InfiniBand Adapter / N8104-146
Dual Port InfiniBand Adapter / N8104-147
InfiniBand Cable 2m/FRD / K410-304(02)
InfiniBand Cable 3m/FRD / K410-304(03)
InfiniBand Switch 36 ports/FDR / NE3707-061
Redundant Power Supply Unit / NE3707-063
Others:
NEC Corporation
Revision 6.1 – February 18, 2015
46
SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120e-2M
1.0
NEC Corporation
September 13, 2013
Added VMware ESXi 5.5 to the list of operating system supported
Updated OS support matrix
Initial release
Revision 6.1 – February 18, 2015
47