ENERGY STAR ® Power and Performance Data Sheet Model Name: Express5800/R120d-2M System Characteristics Form Factor 2 socket rack server Available Processor Sockets 2 Available DIMM Slots / Max Memory Capacity 24slots / 768GB max. ECC and/or Fully Buffered DIMMs DDR3-1600 ECC DIMMs Available Expansion Slots 6 slots Minimum and Maximum # of Hard Drives Min.: 1unit ; Max: 16units Redundant Power Supply Capable? Yes Power Supply Make and Model Delta Electronics DPS-800QB A Power Supply Output Rating* (watts) 800W Minimum and Maximum # of Power Supplies 1 to 2 Input Power Range (AC or DC) 115Vac and 230Vac Power Supply Efficiency at Specified Loadings* 87.40@10%, 91.67@20%, 94.09@50%, 91.95@100% Power Supply Power Factor at Specified Loadings* 0.89@10%,0.96 @20%, 0.99@50%, 0.99@100% Operating Systems Supported Microsoft Windows Server 2008 R2 Standard Microsoft Windows Server 2008 R2 Enterprise etc. Installed Operating System for Testing Microsoft Windows Server 2008 R2 Standard * Note: Power supply information is for a single power supply only System Configurations Minimum Typical Maximum N8100-1780Y Intel Xeon E5-2640 2.50GHz x2 DDR3-1600 2GB x4 N8100-1780Y Intel Xeon E5-2640 2.50GHz x2 DDR3-1600 32GB x8 N8100-1780Y Intel Xeon E5-2640 2.50GHz x2 DDR3-1600 32GB x24 SATA 6Gbps 7200rpm 250GB x1 SAS 6Gbps 10000rpm 900GB x3 SAS 6Gbps 10000rpm 900GB x16 None SAS Raid Card x1 SAS Raid Card x1 Fibre Channel card x1 SAS HBA card x1 Ethernet card x2 Power Supply Number and Redundancy Configuration Delta DPS-800QA 800W x1 Delta DPS-800QA 800W x2 Delta DPS-800QA 800W x2 Management Controller or Service Processor Installed? Yes Yes Yes Minimum Typical Maximum Configuration ID Processor Information Memory Information Internal Storage I/O Devices Other Hardware Features / Accessories Power Data Idle Category (1S and 2S only) ENERGY STAR Idle Power Allowance (1S and 2S only) Category D: Managed Dual Installed Processor (2P) Servers 150W 714W 1870W Measured Idle Power (watts) 88.4 146.1 312.8 Power at Full Load* (watts) 180.3 245.0 426.1 Benchmark / Method Used for Full Load Test Use SiSoftware Sandra Engineer (.NET Multi-Media) 230V / 60Hz Test Voltage and Frequency for Idle and Full Load Test Range of Total Estimated Energy Usage ** (kWh/year) 1,549 to 3,158 2,561 to 4,292 5,480 to 7,465 Link to Detailed Power Calculator (if available) * Note: Full load power represents the sustained, average power at 100% load of the given workload, and does not necessarily represent the absolute peak power or the highest average, sustained power possible for other workloads. ** Note: Estimated kWh/year gives the absolute range of energy use a user could expect from continuous operation (24x7x365) and ranges from 100% Idle usage to 100% full load operation. The calculation also includes typical data center overhead at a ratio of 1 watt of overhead to every 1 watt of IT load (corresponding to a PUE of 2.0). Closer approximations may be found by using established power calculators and specific information about the intended operating environment (e.g., average time at Idle, data center PUE, etc.). Benchmark #1 Power and Performance for Benchmark #1 Minimum Maximum 180.3W 245W 426.1W 64.6Mpixel/s 64.8Mpixel/s 64.5Mpixel/s Power Performance Ratio (perf score/avg. power) 0.36 0.26 0.15 Link to Full Benchmark Report (Where Available) N/A N/A N/A Power and Performance for Benchmark #2 (optional) Minimum Typical Maximum Benchmark #2 Avg. Power Measured During Benchmark Run Typical SiSoftware Sandra Engineer (.NET Multi-Media) Benchmark Used and Type of Workload Benchmark Performance Score Benchmark Used and Type of Workload Avg. Power Measured During Benchmark Run Benchmark Performance Score Power Performance Ratio (perf score/avg. power) Link to Full Benchmark Report (Where Available) ENERGY STAR Power and Performance Data Sheet Model Name: Express5800/R120d-2M Page 2 of 3 Power Saving Features Processor Dynamic Voltage and Frequency Scaling Processor or Core Reduced Power States Power Capping Variable Speed Fan Control Based on Power or Thermal Readings Low Power Memory States Low Power I/O States Liquid Cooling Capability Enabled on Shipment End-User Enabling Required Yes Yes No Yes No No No No No Yes No No No No Other1: Other2: Other3: Other4: Power and Temperature Measurement and Reporting Input Power Available & Accuracy? Yes, +/- 5% for 80W~800W, +/-10W for ~100W Input Air Temp Available & Accuracy? Yes, +/- 2(ﾟc) Processor Utilization Available? Yes Other Data Measurements Available & Accuracy? Compatible Protocols for Data Collection IPMI Averaging method and time period Non Averaging, 1 sec. interval sampling. Thermal Information * Minimum Typical Maximum 180.3 245.0 426.1 1.6 3.2 5.8 Airflow at Maximum Fan Speed (CFM) at Peak Temp. 192.0 183.5 177.5 Airflow at Nominal Fan Speed (CFM) at Nominal Temp. 64.0 67.2 83.9 Total Power Dissipation (watts) Delta Temperature at Exhaust at Peak Temp. (˚C) * References: ASHRAE Extended Environmental Envelope Final August 1, 2008 Thermal Guidelines for Data Processing Environments, ASHRAE, 2004, ISBN 1-931862-43-5 Peak temperature is defined as 35 ˚C, Nominal Temperature is defined as 18 - 27 ˚C Notes 1. SPECpower_ssj2008 is a registered trademark of the Standard Performance Evaluation Corporation (SPEC). Benchmark results stated above reflect results published on XX/XX/XX. For the latest SPECpower_ssj2008 benchmark results, visit http://www.spec.org/power_ssj2008. ENERGY STAR Qualified Configurations Include specific information on ENERGY STAR Qualified SKUs or configurations Qualified Configuration ID: N8100-1780Y ENERGY STAR Power and Performance Data Sheet Model Name: Express5800/R120d-2M Page 3 of 3 ENERGY STAR Qualified Configurations (Continued) Include specific information on ENERGY STAR Qualified SKUs or configurations