www.jfwindustries.com JFW's Quality Policy “JFW is committed to anticipating and exceeding customer’s requirements and expectations through cost-competitive, quality products and services that are delivered on time and through continual improvements to our quality management system.” JFW's Standard Terms and Conditions JFW Industries, Inc. has standard terms of Net 30 days with approved credit. Alternate methods of payment include MASTERCARD, American Express, VISA, COD or ADVANCE PAYMENT. International Payment Terms are ADVANCE PAYMENT or MASTERCARD, American Express and VISA. Any other payment terms must be negotiated in advance. Shipping terms are FOB JFW Ind for Domestic Customers and FCA JFW Ind for International Customers. ALL SHIPPING CHARGES will be PREPAID and ADDED TO THE INVOICE or SHIPPED COLLECT VIA YOUR DESIGNATED FREIGHT CARRIER. JFW INDUSTRIES WARRANTY JFW PRODUCTS ARE WARRANTED AGAINST DEFECTS IN WORKMANSHIP AND MATERIAL UNDER NORMAL USE AND SERVICE AS FOLLOWS: (2) TWO YEARS FROM DATE OF SHIPMENT FOR ALL FIXED AND SOLID STATE PRODUCTS. (1) ONE YEAR FROM DATE OF SHIPMENT FOR ALL MECHANICAL AND ELECTRO-MECHANICAL PRODUCTS. JFW INDUSTRIES’ ONLY OBLIGATION UNDER THIS WARRANTY IS TO REPAIR OR REPLACE, AT ITS FACTORY, ANY JFW PRODUCT OR PART THEREOF THAT IS RETURNED TO JFW INDUSTRIES BY THE ORIGINAL PURCHASER WITHIN THE WARRANTY PERIOD. THE WARRANTY STATED ABOVE IS YOUR SOLE AND EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR FITNESS FOR ANY PARTICULAR PURPOSE. JFW INDUSTRIES SHALL NOT BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL INJURY, LOSS OR DAMAGE INCURRED THROUGH THE USE, OR INABILITY TO USE, ANY JFW INDUSTRIES PRODUCT. JFW Industries, Inc. 5134 Commerce Square Drive Indianapolis, Indiana 46237 Call-317-887-1340 Toll Free-877-887-4JFW (4539) Fax-317-881-6790 E-mail: [email protected] JFW International Sales 7 Albion Road South Benfleet Essex, UK SS7 5PU Phone +44 7768-662666 Fax +44 1268-795377 E-mail: [email protected] Catalog 19 Printed 09-2015 Programmable Attenuators Solid-State Models • • • • Power handling up to +20 dBm Long lifetime solid-state design Frequencies up to 2200 MHz Various connectors available (F, 75 Ω BNC, 75 Ω N) Featured Models* See website for complete specifications and drawings. Model Range Frequency 75P-124 0-63 x 1 dB 5-1000 MHz 75P-141 0-63 x 1 dB 900-2150 MHz 75P-193 0-63 x 1 dB 5-2150 MHz 75P-153 0-63.5 x 0.5 dB 20-1000 MHz 75P-173 0-127 x 1 dB 450-2150 MHz Relay Models • • • • 0.5 Watt power handling typical Low distortion Frequencies up to 2150 MHz Various connectors available (F, 75 Ω BNC, 75 Ω N) Featured Models* See website for complete specifications and drawings. Model Range Frequency 75P-163 0-63.75 x 0.25 dB DC-1000 MHz 75P-157 0-95.5 x 0.5 dB DC-1000 MHz 75P-200 0-63 x 1 dB DC-2150 MHz 75P-199 0-95 x 1 dB DC-2150 MHz 75P-033 0-127 x 1 dB DC-1000 MHz Programmable Attenuator Systems • • • Contact the factory for a quote on your custom configuration. Can include various components in addition to attenuators. Ethernet, RS-232 or GPIB control available. Featured Models* See website for complete specifications and drawings. Model Description Frequency 75PA-076 2 attenuators, low profile benchtop DC-2150 MHz 75PA-079 2 attenuators, 19" rack DC-1000 MHz 75PA-053 2 attenuators, 19" rack 450-2150 MHz 75PA-066 4 attenuators, 19" rack 450-2150 MHz *Visit our website for an expanded list of models. www.jfwindustries.com/programmables JFW Industries 317-887-1340 [email protected] 3 Manually Variable Attenuators • • • 1 Watt power handling typical Available in 0.1 dB, 1 dB and 10 dB steps Various connectors available (F, 75 Ω BNC, 75 Ω N) Rotors (single shaft) Featured Models* See website for complete specifications and drawings. Model Range Frequency 75R-057 0-1 x 0.1 dB DC-1000 MHz 75R-056 0-10 x 1 dB DC-1000 MHz 75R-050 0-10 x 1 dB DC-2200 MHz 75R-055 0-70 x 10 dB DC-1000 MHz 75R-089 0-60 x 10 dB DC-2200 MHz Rotors (dual shaft) Featured Models* See website for complete specifications and drawings. Model Range Frequency 75DR-022 0-11 x 0.1 dB DC-1000 MHz 75DR-009 0-70 x 1 dB DC-1000 MHz 75DR-026 0-50 x 1 dB DC-1500 MHz 75DR-021 0-30 x 1 dB DC-2100 MHz Benchtop, Panel mounted • • Custom designs in-line w/ catalog pricing Benchtop box and panel mounting available for any JFW rotor Featured Models* Model See website for complete specifications and drawings. Description Frequency 75PM-020 (4) 75DR-009, 19" rack DC-1000 MHz 75BR-023 0-70 x 1 dB, benchtop box DC-2150 MHz *Visit our website for an expanded list of models. www.jfwindustries.com/rotors 4 JFW Industries 317-887-1340 [email protected] Fixed Attenuators & Terminations Fixed Attenuators • See website for complete listing of fixed attenuators. Featured Models* See website for complete specifications and drawings. Model Frequency Power Connector 75F DC-500 MHz 1W BNC 75F DC-1000 MHz 1W F or N 75FP-XXX-2G DC-2000 MHz 1W BNC, F, N or TNC 75FP-XXX-3G DC-3000 MHz 0.5 W F or N Fixed Attenuators (DC-Passing) • • Custom units also available. Up to 50V and 4A DC passing. Featured Models* See website for complete specifications and drawings. Model Frequency Power Connector 75FFB 950-2150 MHz 1W BNC or F 75FFD 450-2000 MHz 1W BNC or F Terminations • See website for complete listing of terminations. Featured Models* See website for complete specifications and drawings. Model Frequency Power Connector 75T-001 DC-1000 MHz 1W BNC male 75T-019 DC-2150 MHz 1W F male thread-on 75T-041 DC-3000 MHz 2W N male or female 75T-052 DC-3000 MHz 1W F male push-on or thread-on 75T-055 DC-3000 MHz 2W BNC male *Visit our website for an expanded list of models. www.jfwindustries.com/fixed www.jfwindustries.com/term JFW Industries 317-887-1340 [email protected] 5 RF Switches Solid-State Switches • • • • All models listed are self-terminating (reflective also available). Typical power handling +20 dBm. Long lifetime solid-state design. Typical switching speed in the microseconds. Featured Models* See website for complete specifications and drawings. Model Type Frequency Max IL Min Isolation 75S-365 1P2T 5-2150 MHz 2.5 dB 70 dB 75S-366 1P4T 5-2150 MHz 2.5 dB 70 dB 75S-371 1P8T 5-2150 MHz 3.5 dB 60 dB 75S-264 1P16T 20-1000 MHz 2.0 dB 55 dB Relay Switches • • • All models listed are self-terminating (reflective also available). Typical power handling +20 dBm. 10 milliseconds typical switching speed. Featured Models* See website for complete specifications and drawings. Model Type Frequency Max IL Min Isolation 75S-348 1P1T Normally Open DC-2150 MHz 0.75 dB 50 dB 75S-111 1P2T Failsafe DC-2150 MHz 1.0 dB 45 dB 75S-285 1P3T Normally Open DC-2000 MHz 2.0 dB 80 dB 75S-306 1P4T Normally Open DC-2150 MHz 0.8 dB 50 dB 75S-221 1P8T Failsafe DC-2150 MHz 2.0 dB 50 dB 75S-303 1P16T Failsafe DC-2150 MHz 1.5 dB 50 dB RF Switch Assemblies • • • Contact the factory for a quote on your custom configuration. Can include various components in addition to switches. Ethernet, RS-232 or GPIB control available. Featured Models* See website for complete specifications and drawings. Model Description Frequency 75SA-058 1P16T, 1U 19" rack 20-1000 MHz 75SA-082 (4) 1P2T, low profile benchtop DC-2150 MHz *Visit our website for an expanded list of models. www.jfwindustries.com/switch 6 JFW Industries 317-887-1340 [email protected] Power Dividers Resistive Power Dividers • Available with BNC, F or N connectors (male or female) Featured Models* See website for complete specifications and drawings. Model Type Frequency Power IL 75PD-001 2-way DC-1000 MHz 1W 6 dB 75PD-045 2-way DC-2200 MHz 2W 6 dB 75PD-046 3-way DC-2000 MHz 2W 9.5 dB 75PD-047 4-way DC-2000 MHz 2W 12 dB 75PD-165 4-way DC-3000 MHz 1W 12 dB 75PD-048 5-way DC-2000 MHz 2W 14 dB Reactive Power Dividers • • • Available with BNC, F or N female connectors 5 Watts average power handling when used as a divider 20 dB isolation typical Featured Models* See website for complete specifications and drawings. Model Type Frequency 75PD-074 2-way 800-2400 MHz 75PD-072 4-way 800-2400 MHz 75PD-075 8-way 950-2150 MHz DC-Blocked Power Dividers • • Power dividers with some or all ports DC-Blocked also available Contact the factory with your specific requirement *Visit our website for an expanded list of models. www.jfwindustries.com/divider JFW Industries 317-887-1340 [email protected] 7 Test Accessories Impedance Matching 57Z series 57ZT series 57ZTT series Typical Specifications Resistive Matching Pad Toroidal Matching Transformer Microstrip Matching Transformer Frequency coverage from DC up to 3 GHz Low Frequency 0.5-1000 MHz Frequencies starting @ 300 MHz Up to 3 GHz 5.7 dB Insertion Loss <1 dB Insertion Loss <1 dB Insertion Loss 1W average 1W average 20W average Resistive Coupler • • Couples signal in both directions (no directivity) Minimum coupling value of 20 dB Featured Models* See website for complete specifications and drawings. Model Frequency 75C-048-20 DC-1000 MHz 75C-049-20 DC-2150 MHz RF Detectors • Converts an RF signal into a DC voltage Featured Models* See website for complete specifications and drawings. Model Frequency 75D-009 1-1000 MHz 75D-010 1-2200 MHz DC Blocks • Blocks DC voltage while passing RF signal Featured Models* See website for complete specifications and drawings. Model Frequency Breakdown Voltage 75DB-001 1-2500 MHz 100V 75DB-013 0.1-3000 MHz 50V Bias Taps • Used to add or remove DC voltage from a coaxial cable Featured Models* See website for complete specifications and drawings. Model Frequency DC Voltage DC Current 75BT-007 100-1750 MHz 200V 2A 75BT-024 950-2150 MHz 100V 1A 75BT-025 5-2150 MHz 100V 1A 8 JFW Industries 317-887-1340 [email protected] Engineering Reference Guide Effect of VSWR on Transmitted Power VSWR Return Loss (dB) Trans. Loss (dB) Volt Refl. Coeff. Power Trans. (%) Power Refl. (%) 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.15 1.20 1.25 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 25.00 30.00 46.1 40.1 36.6 34.2 32.3 30.7 29.4 28.3 27.3 26.4 23.1 20.8 19.1 17.7 15.6 14.0 12.7 11.7 10.9 10.2 9.5 7.4 6.0 5.1 4.4 3.9 3.5 3.2 2.9 2.7 2.5 2.3 2.2 2.1 1.9 1.8 1.7 1.6 1.5 1.3 1.2 1.2 1.1 1.0 1.0 .9 .9 .7 .6 .000 .000 .001 .002 .003 .004 .005 .006 .008 .010 .021 .036 .054 .075 .122 .177 .238 .302 .370 .440 .512 .881 1.249 1.603 1.938 2.255 2.553 2.834 3.100 3.351 3.590 3.817 4.033 4.240 4.437 4.626 4.807 5.149 5.466 5.762 6.042 6.301 6.547 6.780 7.002 7.212 7.413 8.299 9.035 .01 .01 .02 .02 .02 .03 .03 .04 .04 .05 .07 .09 .11 .13 .17 .20 .23 .26 .29 .31 .33 .43 .50 .56 .60 .64 .67 .69 .71 .73 .75 .76 .78 .79 .80 .81 .82 .83 .85 .86 .87 .88 .88 .89 .89 .90 .90 .92 .94 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.9 99.8 99.8 99.5 99.2 98.8 98.3 97.2 96.0 94.7 93.3 91.8 90.4 88.9 81.6 75.0 69.1 64.0 59.5 55.6 52.1 49.0 46.2 43.7 41.5 39.5 37.7 36.0 34.5 33.1 30.6 28.4 26.5 24.9 23.4 22.1 21.0 19.9 19.0 18.1 14.8 12.5 .0 .0 .0 .0 .1 .1 .1 .1 .2 .2 .5 .8 1.2 1.7 2.8 4.0 5.3 6.7 8.2 9.6 11.1 18.4 25.0 30.9 36.0 40.5 44.4 47.9 51.0 53.8 56.2 58.5 60.5 62.3 64.0 65.5 66.9 69.4 71.6 73.5 75.1 76.6 77.9 79.0 80.1 81.0 81.9 85.2 87.5 JFW Industries 317-887-1340 [email protected] 9 Power Conversion Table dBm mW dBmV in 75 Ohms -30 -29 -28 -27 -26 -25 -24 -23 -22 -21 -20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 0.0010 0.0013 0.0016 0.0020 0.0025 0.0032 0.0040 0.0050 0.0063 0.0079 0.010 0.013 0.016 0.020 0.025 0.032 0.040 0.050 0.063 0.079 0.10 0.13 0.16 0.20 0.25 0.32 0.40 0.50 0.63 0.79 1.00 1.26 1.58 2.00 2.51 3.16 3.98 5.01 6.31 7.94 10.0 12.6 15.8 20.0 25.1 31.6 39.8 50.1 63.1 79.4 100.0 18.75 19.75 20.75 21.75 22.75 23.75 24.75 25.75 26.75 27.75 28.75 29.75 30.75 31.75 32.75 33.75 34.75 35.75 36.75 37.75 38.75 39.75 40.75 41.75 42.75 43.75 44.75 45.75 46.75 47.75 48.75 49.75 50.75 51.75 52.75 53.75 54.75 55.75 56.75 57.75 58.75 59.75 60.75 61.75 62.75 63.75 64.75 65.75 66.75 67.75 68.75