PRODUCT BRIEF CoolSET F2 expands its family Now also available in TO-220-6 & DIP-7 ! Description: Second generation of integrated Power ICs for switched mode power supplies (SMPS). BY I N T EG R AT I N G a pulse width modulator control IC and CoolMOS™ power MOSFET into one package, CoolSET™ marks a new dimension in design agility and miniaturization. At the same time, the CoolSET family provides the highest output power with the lowest losses available in industry. CoolSET additionally integrates a very low power standby concept which reduces the power dissipation in standby mode. N O W CoolSET is also available with 67kHz operating frequency the ‚B‘ version. The CoolSET family is offered in 3 packages broadening the power range up to 180W at wide range voltage input. Simultanously the new packages are with improved creepage distance. Applications: Switched Mode Power Supplies (SMPS) for: Adapters - Notebooks - Printers - LCD-Monitors Battery Chargers for Portables - Mobile Phones - Digital Still Cameras - Personal Digital Assistants / Organizers - Battery Operated Tools Set-Top-Boxes Digital Video Disc Players / Recorders As well as Standby / Auxillary Power Supplies for: Features: Benefits: • Integrated Power IC • Easier SMPS Design • 650V and 800V avalanche rugged CoolMOSTM technology • Reduced heat generation • Enhanced integrated protection functions • Reduced system cost, size and weight • Less external components • Lowest standby power dissipation • Comply with standby power requirements • Modulated gate drive • Reduced EMI • External current sense • Flexibility in current limitation • Packages DIP-8, DIP-7, TO-220-6 • Optimized fit for each application • Increased creepage distance PC White goods USB CoolSET F2 ICE2xxxxx series www.infineon.com/coolset Never stop thinking PRODUCT BRIEF Typical Application Example: AC/DC Flyback Converter VDS [V] 650 Type fOPER [kHz] 100 ICE2A0565 ICE2A0565Z ICE2A165 ICE2A265 ICE2A365 RDS(on) POUT(max.) 1) [Ω ] [W] 6.0 15 6.0 13 3.0 21 1.0 34 0.5 47 Package P-DIP-8-6 P-DIP-7-1 P-DIP-8-6 P-DIP-8-6 P-DIP-8-6 650 67 ICE2B165 ICE2B265 ICE2B365 3.0 1.0 0.5 21 P-DIP-8-6 34 P-DIP-8-6 47 P-DIP-8-6 800 100 ICE2A180 ICE2A280 ICE2A180Z ICE2A280Z 3.0 0.8 3.0 0.8 21 37 19 33 VDS [V] 650 650 Type fOPER [kHz] 100 ICE2A765P 67 ICE2B765P P-DIP-8-6 P-DIP-8-6 P-DIP-7-1 P-DIP-7-1 Package RDS(on) POUT(max.) 2) [Ω ] [W] 0.5 180 P-TO220-6 ISO 0.5 180 P-TO220-6 ISO 1) Rth=56k/W (~6cm 2 copper area), Ta=50°C, Tj=125°C, Vin=85V...270V 2) Rth=2,7k/W, Ta=50°C, Tj=125°C,Vin=85V...270V How to reach us: http://www.infineon.com Published by Infineon Technologies AG, Bereich Kommunikation, St.-Martin-Strasse 53, D-81541 München © Infineon Technologies AG 2002. All Rights Reserved. Published by Infineon Technologies AG Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. P-DIP-8 • Pout ~10...45W • standard DIP8 package NEW! P-DIP-7 • Pout ~10...35W • increased creepage distance TO-220-6 Isolated NEW! • Pout ~50W...200W • isolated lead frame • increased creepage distance Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-sup-port device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Printed in Germany