OM5597/RD2612 POS Reference Design Rev. 1.2 — 20 September 2012 208512 Objective short data sheet PUBLIC 1. General description OM5597/RD2612 is a reference design of a cost effective EMV compliant Point of Sales Terminal based on NXP components. It provides an EMV Level 1 compliant software stack for contactless as well as contact payment based on PN512/C2 and TDA8026. The user interface composed out of an LCD screen and a keyboard demonstrates the following showcases: • First steps of contact and contactless EMV payment with JCOP Dual Interface card • First steps of payment with a mobile phone including P2P data exchange • Closed loop payment based on MIFARE DESFire EV1 together with MIFARE SAM AV2 The OM5597/RD2612 board comes together with all design files including the hardware Gerber Files and the software source files. 2. Features and benefits 2.1 Features EMVCo compliant contactless smart card reader based on PN512/C2 with RF amplifier EMVCo compliant contact smart card reader based on TDA8026 EMV Level 1 compliant contact and contactless software stack First step of contact and contactless EMV payment application selection with card/phoneshowcase Closed loop payment showcase NFC Peer to Peer communication showcase 2.2 Benefits Easy integration of NXP components into a cost efficient POS reader Fast development of a certifiable software stack, due to reuse of already EMV L1 certified source files Reusable showcase of closed loop payment, contact and contactless payment card selection as well as NFC functionality 3. Applications Payment OM5597/RD2612 NXP Semiconductors POS Reference Design 4. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit VDD supply voltage - - 5.0 - V Tamb ambient temperature - - +25 - C 5. Ordering information Table 2. Ordering information Type number Package OM5597/RD2612 Name Description Version - Package containing: - POS Reference Design Board USB cable MIFARE DESFire EV1 card Pre Personalized JCOP Payment card OM5597_RD2612_SDS Objective short data sheet PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 2 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 6. Block diagram C5 C6 C7 C8 C1 C2 C3 C4 SC1 SW card connector C5 C6 C7 C8 C1 C2 C3 C4 COLOR LCD DISPLAY SAM2 SW JTAG card connector C5 C6 C7 C8 C1 C2 C3 C4 IO SAM3 SW BFL SPI HAL PN512/C2 TDA8026 card connector C5 C6 C7 C8 SW UART 7816 I2C LPC1768 C1 C2 C3 C4 USB device computer SAM4 SW Pin PAD entry card connector C5 C6 C7 C8 C1 C2 C3 C4 SAM5 SW card connector Fig 1. OM5597_RD2612_SDS Objective short data sheet PUBLIC 001aao152 Block diagram of OM5597/RD2612 All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 3 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 7. Functional description 7.1 Content The kit includes the following items: • • • • OM5597/RD2612, Point of Sales board 1 USB cable 1 MIFARE DESFire EV1 card 1 pre personalized JCOP Dual Interface card The MIFARE SAM AV2 needs to be organized separately. 7.2 Hardware architecture The POS reference board, see Figure 1, is composed out of the following NXP components: • PN512/C2 contactless NFC reader IC supporting ISO/IEC 14443 type A and B, as described in Ref. 1 • • • • • RF Amplifier for the PN512, as described in Ref. 8 TDA8026 5-slot contact smart card IC, as described in Ref. 2 Cortex M3 LPC1768, as described in Ref. 3 a display for the user interface a key pad for PIN entry within the closed loop payment showcase The quick startup guide, see Ref. 6, gives directions how to start working with the POS reference design. The board is structured of two main parts. The main board provides the connections on the user interface (display and key pad), the daughter board implements the main electronics such as the PN512, TDA8026 and LPC1768. The antenna is part of the main board but is directly connected to the daughter board. If one wants to remove the daughter board, the antenna needs to be unsoldered in advance. A serial interface (RS232) can be used to adapt or reprogram the software of the board using FlashMagic. 7.2.1 Power supply The board can be supplied using USB or over an external power supply connected to the powerplug. To power the board with USB, the type-B USB connector must be connected to a host computer through a USB cable. The jumper close to the USB type-B connector must be set in order to connect VBUS to the 5 V input. OM5597_RD2612_SDS Objective short data sheet PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 4 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 7.3 Software architecture The software stack coming together with the POS reference design is embedded into the FreeRTOS environment of the LPC1768. It can be compiled and adapted using the LPCXpresso environment. For more details, please refer to Ref. 7. The software stack is composed of the following items: • • • • A contactless EMV library based on a PN512 HAL A contact EMV library based on a TDA8026 HAL Drivers for the interaction with the user interface such as the display and key pad. A showcase using the LLCP protocol based on the contactless EMV library, showing the possible Peer to Peer communication of a POS terminal with a NFC phone • A showcase using the contactless EMV library, performing a Paypass Payment Selection of a contactless payment media • A showcase of a closed loop payment based on MIFARE DESFire EV1 and MIFARE SAM AV2 • A showcase using the contact EMV library, performing a Payment Selection of a contact payment card LPC1768 FreeRTOS P2P DEMO LLCP EMV: PPSE TRANSACTION CLOSED LOOP PAYMENT (DESFire + SAM) EMV: PSE TRANSACTION CONTACTLESS EMV LIBRARY CONTACT EMV LIBRARY PN512HAL TDA8026HAL DRIVER 001aao206 Fig 2. Software overview 7.4 Certification The OM5597/RD2612 went successfully through the EMV L1 certification both for contact and contactless terminal certification. OM5597_RD2612_SDS Objective short data sheet PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 5 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 8. Limiting values Table 3. Limiting values[1] In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit VDD supply voltage active reader - 5.00 - V Tamb ambient temperature - - +25 - C dcpl coupling distance measured from the center of the antenna - 50 - mm [1] Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 9. Abbreviations Table 4. OM5597_RD2612_SDS Objective short data sheet PUBLIC Abbreviations Acronym Description EMV Europay Mastercard VISA (a Payment Industry organization publishing the EMV standard) EMVCo Compliant to the Europay Mastercard VISA standard JCOP Java Card Operating System NFC Near Field Communication PIN Personal Identification Number POS Point Of Sales RF Radio Frequency RTOS Real Time Operating System USB Universal Serial Bus All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 6 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 10. References OM5597_RD2612_SDS Objective short data sheet PUBLIC [1] Data sheet PN512/C2 Contactless reader IC — available on NXP web [2] Data sheet TDA8026 Contact reader IC — available on NXP web [3] Data sheet Cortex M3 LPC1768 — available on NXP web [4] Short data sheet MF3ICD81 MIFARE DESFire EV1 — available on NXP web [5] Short data sheet P5DF081 MIFARE SAM AV2 — available on NXP web [6] User Manual POS Reference Design Quick Startup Guide — available on NXP web [7] User Manual POS Reference Design Firmware description — available on NXP web [8] Application Note AN10893 RF Amplifier for NXP contactless MFRC52x — available on NXP web All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 7 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 11. Revision history Table 5. Revision history Document ID Release date Data sheet status Change notice Supersedes OM5597_RD2612_SDS v 1.2 20120920 Objective short data sheet - OM5597_RD2612_ SDS v 1.1 - OM5597_RD2612_ SDS v 1.0 Modifications: OM5597_RD2612_SDS v 1.1 Modifications: OM5597_RD2612_SDS v 1.0 OM5597_RD2612_SDS Objective short data sheet PUBLIC • Section 12.4 “Licenses”. updated 20110803 • Objective short data sheet Table 2 “Ordering information”: “CD with documentation and software” removed 20110526 Objective short data sheet All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 - - © NXP B.V. 2012. All rights reserved. 8 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 12. Legal information 12.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 12.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 12.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. OM5597_RD2612_SDS Objective short data sheet PUBLIC Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 9 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 12.4 Licenses Purchase of NXP ICs with ISO/IEC 14443 type B functionality This NXP Semiconductors IC is ISO/IEC 14443 Type B software enabled and is licensed under Innovatron’s Contactless Card patents license for ISO/IEC 14443 B. The license includes the right to use the IC in systems and/or end-user equipment. RATP/Innovatron Technology Purchase of NXP ICs with NFC technology Purchase of an NXP Semiconductors IC that complies with one of the Near Field Communication (NFC) standards ISO/IEC 18092 and ISO/IEC 21481 does not convey an implied license under any patent right infringed by implementation of any of those standards. 12.5 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. MIFARE — is a trademark of NXP B.V. DESFire — is a trademark of NXP B.V. 13. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] OM5597_RD2612_SDS Objective short data sheet PUBLIC All information provided in this document is subject to legal disclaimers. Rev. 1.2 — 20 September 2012 208512 © NXP B.V. 2012. All rights reserved. 10 of 11 OM5597/RD2612 NXP Semiconductors POS Reference Design 14. Contents 1 2 2.1 2.2 3 4 5 6 7 7.1 7.2 7.2.1 7.3 7.4 8 9 10 11 12 12.1 12.2 12.3 12.4 12.5 13 14 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 4 Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hardware architecture . . . . . . . . . . . . . . . . . . . 4 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Software architecture . . . . . . . . . . . . . . . . . . . . 5 Certification. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 6 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Contact information. . . . . . . . . . . . . . . . . . . . . 10 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 20 September 2012 208512