682

SENSITRON
SEMICONDUCTOR
SHD219409
TECHNICAL DATA
DATA SHEET 682, REV -
Formerly part number SHD2199
HERMETIC POWER MOSFET
P-CHANNEL
FEATURES:
œ -100 Volt, 0.2 Ohm, -18A MOSFET
œ Electrically Isolated Hermetically Sealed
œ Low RDS (on)
œ Equivalent to IRF9140 Series
MAXIMUM RATINGS
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT
ALL RATINGS ARE AT TA = 25•C UNLESS OTHERWISE SPECIFIED.
VGS=10V, TC = 25•C
VGS=10V, TC = 100•C
PULSED DRAIN CURRENT
@ TC = 25•C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25•C
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 1.0mA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = -10V, ID = -11A
VGS = -10V, ID = -18A
GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250mA
FORWARD TRANSCONDUCTANCE
VDS ˜ -15V, IDS = -11A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8x Max. Rating, VGS = 0V
VDS = 0.8x Max. Rating
VGS = 0V, TJ = 125•C
GATE TO SOURCE LEAKAGE FORWARD VGS = -20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = 20V
TOTAL GATE CHARGE
VGS = -10V
GATE TO SOURCE CHARGE
VDS = Max. Ratingx0.5
GATE TO DRAIN CHARGE
ID = -18A
TURN ON DELAY TIME
VDD = -50V,
RISE TIME
ID =-11A,
TURN OFF DELAY TIME
RG = 9.1W
FALL TIME
DIODE FORWARD VOLTAGE
TJ = 25•C, IS = -18A,
VGS = 0V
DIODE REVERSE RECOVERY TIME
TJ = 25•C,
REVERSE RECOVERY CHARGE
IF = -18A,
di/dt = -100A/msec,
VDD ˆ -50V
INPUT CAPACITANCE
VGS = 0 V,
OUTPUT CAPACITANCE
VDS = 25 V,
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
DRAIN TO CASE CAPACITANCE
SYMBOL
VGS
ID
MIN.
-
TYP.
-
UNITS
Volts
Amps
-
MAX.
–20
-18
-11
-72
+150
0.78
160
IDM
TOP/TSTG
R JC
PD
-55
-
BVDSS
-100
-
-
Volts
-
-
0.20
0.22
W
-2.0
6.2
-
-4.0
-
Volts
S(1/W)
-
-
IGSS
-
-
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
VSD
31
3.7
7.0
-
-
-
trr
RDS(ON)
VGS(th)
gfs
IDSS
Qrr
Ciss
Coss
Crss
CDC
-25
-250
Amps
•C
•C/W
Watts
mA
-
-100
100
60
13
35.2
35
85
85
65
-4.2
Volts
-
-
280
nsec
-
1400
600
200
12
3.6
-
mC
pF
-
nA
nC
nsec
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected]
SHD219409
SENSITRON
DATA SHEET 682
REVISION MECHANICAL DIMENSIONS: in Inches / mm
.145
(3.68)
.037
(.94)
.030 (.76) Min.
.050 (1.27)
2
.375
(9.53)
.140 (3.56)Typ.
1
.035 (.89) Min. .450 (11.43)
3
.415
(10.54)
.157 (3.99)
.625
(15.88)
LCC-3P
PINOUT TABLE
DEVICE TYPE
MOSFET
LCC-3P PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected]
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]