SENSITRON SEMICONDUCTOR SHD219410 TECHNICAL DATA DATA SHEET 4001, REV - HERMETIC POWER MOSFET P-CHANNEL FEATURES: -200 Volt, 0.5 Ohm, -11A MOSFET Electrically Isolated Hermetically Sealed Low RDS (on) Equivalent to IRF9240 Series MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT ALL RATINGS ARE AT TA = 25C UNLESS OTHERWISE SPECIFIED. VGS=10V, TC = 25C VGS=10V, TC = 100C PULSED DRAIN CURRENT @ TC = 25C OPERATING AND STORAGE TEMPERATURE TERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25C ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA DRAIN TO SOURCE ON STATE RESISTANCE VGS = -10V, ID = -7A VGS = -10V, ID = -11A GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250mA FORWARD TRANSCONDUCTANCE VDS -15V, IDS = -7A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8x Max. Rating, VGS = 0V VDS = 0.8x Max. Rating VGS = 0V, TJ = 125C GATE TO SOURCE LEAKAGE FORWARD VGS = -20V GATE TO SOURCE LEAKAGE REVERSE VGS = 20V TOTAL GATE CHARGE VGS = -10V GATE TO SOURCE CHARGE VDS = Max. Ratingx0.5 GATE TO DRAIN CHARGE ID = -11A TURN ON DELAY TIME VDD = -100V, RISE TIME ID =-11A, TURN OFF DELAY TIME RG = 9.1W FALL TIME DIODE FORWARD VOLTAGE TJ = 25C, IS = -11A, VGS = 0V DIODE REVERSE RECOVERY TIME TJ = 25C, REVERSE RECOVERY CHARGE IF = -11A, di/dt = -100A/msec, VDD -50V INPUT CAPACITANCE VGS = 0 V, OUTPUT CAPACITANCE VDS = 25 V, REVERSE TRANSFER CAPACITANCE f = 1.0MHz DRAIN TO CASE CAPACITANCE SYMBOL VGS ID MIN. - TYP. - UNITS Volts Amps - MAX. 20 -11 -7 -44 +150 0.78 74 IDM TOP/TSTG R JC PD -55 - BVDSS -200 - - Volts - - -2.0 4.0 - - - IGSS - - Qg Qgs Qgd td(on) tr td(off) tf VSD 28 3.0 4.5 - - - trr - RDS(ON) VGS(th) gfs IDSS Qrr Ciss Coss Crss CDC - 0.50 0.58 -4.0 -25 -250 Amps C C/W Watts W Volts S(1/W) mA - -100 100 60 15 38 35 85 85 65 -4.6 Volts - 440 nsec 3.6 - mC pF - 1200 570 81 12 nA nC nsec 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected] SENSITRON SEMICONDUCTOR SHD219410 TECHNICAL DATA DATA SHEET 4001, REV - MECHANICAL DIMENSIONS: in Inches / mm .145 (3.68) .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) 1 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) 3 .415 (10.54) .157 (3.99) .625 (15.88) PINOUT TABLE DEVICE TYPE MOSFET LCC-3P PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - [email protected] SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •