DATASHEET 125V HEAVY TRANSPORTATION MODULE FEATURES AND BENEFITS* TYPICAL APPLICATIONS Up to 1,000,000 duty cycles or 10 year DC life 125V DC working voltage Active cell balancing Temperature and voltage monitoring CAN bus digital monitoring and communications High power density Buses Electric trains and trolleys Heavy duty transportation Cranes, RTGS Utility vehicles Mining equipment PRODUCT SPECIFICATIONS ELECTRICAL BMOD0063 P125 B08 Rated Capacitance1 63 F Minimum Capacitance, initial1 63 F Maximum Capacitance, initial1 76 F Maximum ESR DC, initial 18 mΩ 1 Test Current for Capacitance and ESRDC 100 A 1 Rated Voltage 125 V Absolute Maximum Voltage 136 V 2 Absolute Maximum Current 1900 A Leakage Current at 25 C, maximum o 10 mA 3 Maximum Series Voltage Capacitance of Individual Cells 1500 V 3000 F 11 Maximum Stored Energy, Individual Cell 3.0 Wh 11 Number of Cells 48 TEMPERATURE Operating temperature range (Cell case temperature) Minimum -40oC Maximum 65oC Storage temperature range (Stored uncharged) Minimum -40oC Maximum 70oC *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details and enclosed information for applicable operating and use requirements. Page 1 Document number: 1014696.7 maxwell.com DATASHEET 125V HEAVY TRANSPORTATION MODULE PRODUCT SPECIFICATIONS (Cont’d) PHYSICAL Mass, typical BMOD0063 P125 B08 61 kg 13 Power Terminals Radsok® Recommended Torque - Terminal N/A Vibration Specification ISO16750-3 Table 14 Shock Specification SAE J2464 Environmental Protection IP65 Cooling Forced Air MONITORING / CELL VOLTAGE MANAGEMENT Temperature Interface Serial Data (CAN) Cell Voltage Monitoring Group Voltage (CAN) Connector Deutsch DTM Cell Voltage Management VMS 2.0 POWER & ENERGY Usable Specific Power, Pd4 Impedance Match Specific Power, Pmax 1,700 W/kg 3,600 W/kg 5 Specific Energy, Emax6 2.3 Wh/kg Stored Energy, Estored 140 Wh 7 SAFETY Short Circuit Current, typical (Current possible with short circuit from rated voltage. Do not use as an operating current.) Certifications High-Pot Capability Page 2 6,900 A RoHS, eMark 4,000 VAC 12 Document number: 1014696.7 maxwell.com DATASHEET 125V HEAVY TRANSPORTATION MODULE TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS BMOD0063 P125 B08 Thermal Resistance (Rca, Case to Ambient), typical 8 Thermal Capacitance (Cth), typical 0.04oC/W 33,000 J/oC Maximum Continuous Current (ΔT = 15oC)8 140 ARMS Maximum Continuous Current (ΔT = 40oC)8 240 ARMS LIFE DC Life at High Temperature1 1,500 hours (at Rated Voltage & Maximum Operating Temperature) Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Projected DC Life at 25oC 1 10 years (held continuously at Rated Voltage) Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Projected Cycle Life at 25oC 1,9,10 1,000,000 cycles Capacitance Change 20% ESR Change 100% Test Current 100 A (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life 4 years (Stored uncharged at 25oC) Page 3 Document number: 1014696.7 maxwell.com DATASHEET 125V HEAVY TRANSPORTATION MODULE ESR AND CAPACITANCE VS TEMPERATURE NOTES 1. Capacitance and ESRDC measured at 25°C using specified test current per waveform below. 2. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 3. After 72 hours at rated voltage. Initial leakage current can be higher. 4. Per IEC 62391-2, Pd = 5. Pmax = 6. Emax = 0.12V2 ESRDC x mass V2 4 x ESRDC x mass ½ CV2 3,600 x mass 7. Estored = ½ CV2 3,600 Page 4 Document number: 1014696.7 maxwell.com 8. ∆T=IRMS2 x ESR x Rca 9. Cycle using specified test current per waveform below. 10. Cycle life varies depending upon application-specific characteristics. Actual results will vary. 11. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and modules composed of those ultracapacitors shipped by Maxwell can be transported without being treated as dangerous goods (hazardous materials) under transportation regulations. 12. Duration = 60 seconds. Not intended as an operating parameter. 13. Without fan. With fan, mass is 63.4 kg. DATASHEET 125V HEAVY TRANSPORTATION MODULE MOUNTING RECOMMENDATIONS Please refer to the user manual for installation recommendations. BCAP0063 P125 B08 Part Description BCAP0063 P125 B08* Document number: 1014696.7 Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, warning marking, serial number. Dimensions (mm) L (± 0.5mm) D (± 0.2mm) 619 *Refer to user manual for product variant details Page 5 MARKINGS maxwell.com 33.3 H(±0.7mm) Package Quantity 265 1 DATASHEET 125V HEAVY TRANSPORTATION MODULE ORDERING INFORMATION Base Module 109024B BMOD0063 P125 B08 63F/125V eMark Module with CAN Communication Power Connection Kit 109131 Power Connection Kit, 90 DEG 109132 Power Connection Kit, STRAIGHT Communication Kit 109133 CAN SIGNAL, Deutsch Fan Kit 129036 FAN KIT, 24V, eMark Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective foreign counterparts: 6643119, 7295423, 7342770, 7352558, 7384433, 7440258, 7492571, 7508651, 7791860, 7791861, 7816891, 7859826, 7883553, 7935155, 8072734, 8098481, 8279580, and patents pending. Maxwell Technologies, Inc. Global Headquarters 3888 Calle Fortunada San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Maxwell Technologies SA Route de Montena 65 CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Leopoldstrasse 244 80807 München Germany Tel: +49 (0)89 / 4161403 0 Fax: +49 (0)89 / 4161403 99 Maxwell Technologies Shanghai Trading Co. Ltd. Unit A2,C 12th Floor Huarun Times Square 500 Zhangyang Road, Pudong New Area Shanghai 200122, P.R. China Phone: +86 21 3852 4000 Fax: +86 21 3852 4099 MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission Maxwell Technologies, Inc. All contents copyright © 2013 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. Page 6 Document number: 1014696.7 maxwell.com Maxwell Technologies Korea Co., Ltd. Room 1524, D-Cube City Office Tower, 15F #662 Gyeongin-Ro, Guro-Gu, Seoul, 152-706 South Korea Phone: +82 10 4518 9829