DATASHEET 75V MODULE FEATURES AND BENEFITS* TYPICAL APPLICATIONS Up to 15 year DC life 75V DC working voltage Resistive cell balancing Temperature outputs High power density Wind turbine pitch control UPS systems PRODUCT SPECIFICATIONS ELECTRICAL BMOD0094 P075 B02 Rated Capacitance1 94 F Minimum Capacitance, initial 94 F 1 Maximum Capacitance, initial1 113 F Maximum ESR DC, initial1 13 mΩ Test Current for Capacitance and ESRDC 100 A 1 Rated Voltage Absolute Maximum Voltage 75 V 91 V 2 Absolute Maximum Current 1,900 A Leakage Current at 25°C, maximum 50 mA 3 Maximum Series Voltage Capacitance of Individual Cells 750 V 3,000 F 9 Maximum Stored Energy, Individual Cell 3.0 Wh 9 Number of Cells 32 TEMPERATURE Operating Temperature (Cell Case Temperature) Minimum -40oC Maximum 65oC Storage Temperature (Stored Uncharged) Minimum -40oC Maximum 70oC *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details for applicable operating and use requirements. Page 1 Document number: 1012179.7 maxwell.com DATASHEET 75V MODULE PRODUCT SPECIFICATIONS (Cont’d) PHYSICAL BMOD0094 P075 B02 Mass, typical 25 kg Power Terminals M8/M10 Recommended Torque - Terminal 20/30 Nm Vibration Specification SAE J2380 Shock Specification N/A Environmental Protection IP54 Cooling Natural Convection MONITORING / CELL VOLTAGE MANAGEMENT Internal Temperature Sensor RTD Temperature Interface Analog Cell Voltage Monitoring N/A Connector Harting Cell Voltage Management Passive POWER & ENERGY Usable Specific Power, Pd4 Impedance Match Specific Power, Pmax 2,100 W/kg 4,300 W/kg 5 Specific Energy, Emax6 2.9 Wh/kg Stored Energy, Estored 73 Wh 7 SAFETY Short Circuit Current, typical 5,800 A (Current possible with short circuit from rated voltage. Do not use as an operating current.) Certifications RoHS High-Pot Capability10 Page 2 Document number: 1012179.7 2,500 VDC maxwell.com DATASHEET 75V MODULE TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS BMOD0094 P075 B02 Thermal Resistance (Rca, All Cell Cases to Ambient), typical 0.50oC/W 8 Thermal Capacitance (Cth), typical 19,000 J/oC Maximum Continuous Current (ΔT = 15oC)8 48 ARMS Maximum Continuous Current (ΔT = 40 C) 78 ARMS o 8 LIFE DC Life at High Temperature1 1,500 hours (held continuously at Rated Voltage and Maximum Operating Temperature) Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Projected DC Life at 25°C1 15 years (held continuously at Rated Voltage) Capacitance Change 20% ESR Change 100% (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life 4 years (Stored uncharged at 25°C) ESR AND CAPACITANCE VS TEMPERATURE 180% Capacitance DC ESR Percentage change from value at 25°C 170% 160% 150% 140% 130% 120% 110% 100% 90% 80% -60 -40 -20 0 20 40 60 Temperature (°C) Page 3 Document number: 1012179.7 maxwell.com 80 DATASHEET 75V MODULE NOTES 1. Capacitance and ESRDC measured at 25°C using specified test current per waveform below. 2. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 3. After 72 hours at rated voltage. Initial leakage current can be higher. 4. Per IEC 62391-2, Pd = 5. Pmax = 6. Emax = 0.12V2 ESRDC x mass V2 4 x ESRDC x mass 8. ∆T=IRMS2 x ESR x Rca 9. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and modules composed of those ultracapacitors shipped by Maxwell can be transported without being treated as dangerous goods (hazardous materials) under transportation regulations. 10. Duration = 60 seconds. Not intended as an operating parameter. ½ CV2 3,600 x mass 7. Estored = ½ CV2 3,600 MOUNTING RECOMMENDATIONS Please refer to the user manual for installation recommendations Page 4 Document number: 1012179.7 maxwell.com MARKINGS Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, warning marking, serial number. DATASHEET 75V MODULE BMOD0094 P075 B02 4 3 2 1 REVISIONS NEGATIVE TERMINAL REV DESCRIPTION CO 1 PRODUCTION RELEASE - 37.0 D 263 W 126.0 189.0 68.5 C 131.5 252.0 POSITIVE TERMINAL 220 H 195 L 515 183 B NOTICE: Part Description A 1 REV A 7/01 L (±0.3mm) BMOD0094 P075 B02 DO NOT SCALE DRAWING Dimensions (mm) W (±0.2mm) THE INFORMATION CONTAINED IN THIS DOCUMENT IS MAXWELL CONFIDENTIAL INFORMATION AND IS THE SOLE PROPERTY OF MAXWELL TECHNOLOGIES. ANY REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN PERMISSION OF MAXWELL TECHNOLOGIES IS PROHIBITED. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN MILIMETERS AFTER PLATING. DRAWN BREAK EDGES 0.3 LATHE FINISH 63 µINCH, MILL FINISH 125 µINCH CHECKED X.XXX DIAMETERS 0.125 TIR X.XXX DIA SURFACES X .X .XX 515 263 MATERIAL 3RD ANGLE PROJECTION & ±1 ±.25 ±.125 N/A 0.025mm ANGLE ±0.5° APPROVALS DATE 4/26/2010 L. ANDERSON Package Quantity H (±0.7mm) 1 DESIGN ENGR MECHANICAL ENGR 220 9244 BALBOA AVENUE, SAN DIEGO, CA 92123 U.S.A MODULE ASSY, BMOOD0094 P075 B02 TEST ENGR SIZE CAUTION CONTAINS PARTS AND/OR ASSEMBLIES SUSCEPTIBLE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD) FINISH 1 DESCRIPTION PROCESS ENGR QUALITY ENGR N/A PRODUCTION ENGR 1 CAGE CODE B 68911 SCALE 1:5 DOC. NO. PART NO. DATESHEET 107725 REV 1 SHEET 1 OF 1 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. 3 2 1 4 Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective foreign counterparts: 6643119, 7295423, 7342770, 7352558, 7384433, 7440258, 7492571, 7508651, 7791860, 7791861, 7859826, 7883553, 7935155, 8072734, 8098481, 8279580, and patents pending. Maxwell Technologies, Inc. Global Headquarters 3888 Calle Fortunada San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Maxwell Technologies SA Route de Montena 65 CH-1 728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Leopoldstrasse 244 80807 München Germany Tel: +49 (0)89 / 4161403 0 Fax: +49 (0)89 / 4161403 99 Maxwell Technologies, Inc. Shanghai Trading Co. Ltd. Unit A2,C 12th Floor Huarun Times Square 500 Zhangyang Road, Pudong New Area Shanghai 200122, P.R. China Phone: +86 21 3852 4000 Fax: +86 21 3852 4099 MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission Maxwell Technologies, Inc. All contents copyright © 2014 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. Page 5 Document number: 1012179.7 maxwell.com Maxwell Technologies Korea Co., Ltd. Room 1524, D-Cube City Office Tower, 15F #662 Gyeongin-Ro, Guro-Gu, Seoul, 152-706 South Korea Phone: +82 10 4518 9829 REV A