SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 5000-hours-life, 105℃ MLK - Series ・6.1mm height ・Endurance : 5,000 hours at 105℃ ・Rated voltage range : 6.3 to 35V ・Nominal capacitance range : 4.7 to 100µF ・Suitable to fit for downsized equipment ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant Longer life MVL P91 MLK ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105℃ 6.3 to 35Vdc ±20%(M) I=0.03CV or 4µA, whichever is greater Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) 6.3V 10V 16V 25V 35V Rated voltage (Vdc) 0.32 0.28 0.26 0.16 0.14 tanδ(Max.) 6.3V 10V 16V 25V 35V Rated voltage(Vdc) 4 3 2 2 2 Z(-10℃)/Z(+20℃) 1 2 3 4 5 6 7 8 9 10 11 12 A±0.2 A 5.3 6.6 B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 10 V LK ◆STANDARD RATINGS 10 16 25 35 16 17 18 ◆MARKING 9C 6.3 15 Please refer to "Product code guide (surface mount type)" EX) 35V10µF WV (Vdc) 14 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C±0.2 B±0.2 φD±0.5 L 5.8 5.8 13 E MLK AAA A DA AAA M AAA G 0.3max. L±0.3 D 5 6.3 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM Code : A W Size code E61 F61 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. ≦±30% of the initial value Capacitance change D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal (at 20℃,120Hz) Cap (µF) Size code 47 100 33 22 47 33 4.7 10 10 22 E61 F61 E61 E61 F61 F61 E61 E61 F61 F61 voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V ◆RATED RIPPLE CURRENT MULTIPLIERS Rated ripple current tanδ (mArms/ 105℃,120Hz) 0.32 0.32 0.28 0.26 0.26 0.16 0.14 0.14 0.14 0.14 ●Rated 36 60 35 30 50 48 19 25 30 42 ・Frequency Multipliers Frequency(Hz) 6.3 to 35Vdc Part No. 120 1.00 1k 1.05 10k 1.08 100k 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. EMLK6R3ADA470ME61G EMLK6R3ADA101MF61G EMLK100ADA330ME61G EMLK160ADA220ME61G EMLK160ADA470MF61G EMLK250ADA330MF61G EMLK350ADA4R7ME61G EMLK350ADA100ME61G EMLK350ADA100MF61G EMLK350ADA220MF61G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 90 CAT. No. E1001N