SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 5000-hours-life, 105℃ MZK - Series ・Endurance : 5,000 hours at 105℃ ・Low impedance ・Rated voltage range : 6.3 to 35V ・Nominal capacitance range : 10 to 150µF ・Suitable for high reliability products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant MVY P76 Longer life MZK ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105℃ 6.3 to 35Vdc ±20%(M) I=0.01CV or 3µA, whichever is greater Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) 6.3V 10V 16V 25V 35V Rated voltage (Vdc) 0.32 0.28 0.26 0.16 0.14 tanδ(Max.) 6.3V 10V 16V 25V 35V Rated voltage(Vdc) 4 3 2 2 2 Z(-10℃)/Z(+20℃) 1 2 3 4 5 6 7 8 9 A±0.2 A 5.3 6.6 11 12 13 14 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,35V:350) Series code Category P C±0.2 B±0.2 φD±0.5 L 5.8 5.8 10 E MZK AAA A DA AAA M AAA G 0.3max. L±0.3 D 5 6.3 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM Code : A W Size code E61 F61 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal (at 20℃,120Hz) B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 Please refer to "Product code guide (surface mount type)" ◆MARKING EX) 35V47µF 9C 47 V ZK ●Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 82 CAT. No. E1001N SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 5000-hours-life, 105℃ MZKSeries - ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code Impedance (Ωmax/20℃,100kHz) Rated ripple current (mArms/105℃,100kHz) 6.3 10 100 150 33 47 100 68 10 10 22 22 33 47 E61 F61 E61 E61 F61 F61 E61 F61 E61 F61 F61 F61 2.2 1.1 2.2 2.2 1.1 1.1 2.2 1.1 2.2 1.1 1.1 1.1 95 140 95 95 140 140 95 140 95 140 140 140 16 25 35 Part No. EMZK6R3ADA101ME61G EMZK100ADA151MF61G EMZK160ADA330ME61G EMZK160ADA470ME61G EMZK160ADA101MF61G EMZK250ADA680MF61G EMZK350ADA100ME61G EMZK350ADA100MF61G EMZK350ADA220ME61G EMZK350ADA220MF61G EMZK350ADA330MF61G EMZK350ADA470MF61G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 6.3 to 35Vdc 120 0.40 1k 0.75 10k 0.90 100k 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 83 CAT. No. E1001N