SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low ESR, 105℃ MKB - Series ・Low ESR ・Endurance : 3,000 hours at 105℃ ・Rated voltage 400V, Capacitance 2.2 to 4.7µF ・RoHS Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range -40 to +105℃ Rated Voltage Range 400Vdc Capacitance Tolerance ±20%(M) (at 20℃, 120Hz) I=0.04CV+100(max.) Leakage Current Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 1 minute) Rated voltage(Vdc) Dissipation Factor 400V (tanδ) tanδ (Max.) (at 20℃, 120Hz) 0.25 Low Temperature Rated voltage(Vdc) 400V Characteristics Z(-25℃)/Z(+20℃) 6 (Max. impedance Ratio) Z(-40℃)/Z(+20℃) (at 120Hz) 10 The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 3,000 hours Endurance at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without Shelf life voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ● Terminal ◆PART NUMBERING SYSTEM Code : A 1 Vent for JA0 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 2.2µF:2R2) Taping code Terminal code Voltage code Series code Category P C±0.2 B±0.2 φD±0.5 D 8 10 3 W 0.3max. L±0.5 Size code HA0 JA0 2 E MK B 4 0 1 A D A A A A M A A A G A±0.2 L A B C 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.7 to 1.1 0.7 to 1.1 P 3.1 4.5 Please refer to "Product code guide (surface mount type)" ◆MARKING ●Rated EX) 400V3.9µF voltage symbol Rated voltage (Vdc) Symbol 400 2G 6A 3.9 2GKB ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code 400 2.2 3.3 3.9 4.7 HA0 JA0 JA0 JA0 ESR (Ωmax/120Hz) 20℃ 20 10 10 10 -40℃ 1,000 500 500 500 Rated ripple current (mArms/105℃,120Hz) 26 37 38 39 Part No. EMKB401ADA2R2MHA0G EMKB401ADA3R3MJA0G EMKB401ADA3R9MJA0G EMKB401ADA4R7MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 400Vdc 120 1.00 1k 1.30 10k 1.40 100k 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 102 CAT. No. E1001N