FG 623TM DECEMBER, 2013 EC 97911-053 FEATURES Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. Features • • • • • • • • • • • • FG 623TM is an inside glazed system 2-1/4" sight line with standard 6" system depth Optional IsoLockTM lanced pour and debridged thermal break Screw spline and shear block fabrication and joinery Infill options of 1/4" and 1" Silicone compatible glazing materials for long lasting seals Corner members are available for 90° and 135° applications Incorporates expansion verticals as required FG 623TM has been large missile impact and cycle tested FG 623TM is for stock length sales PermanodicTM anodized finishes in seven choices Painted finishes in standard and custom choices Optional Features Product Applications • Ribbon windows • Ideal for single and multi-lite punched openings © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. • Integrates with standard Kawneer windows For specific product applications, Consult your Kawneer representative. kawneer.com ADMD170 1 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FG 623TM BLANK PAGE ADMD170 kawneer.com © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2 DECEMBER, 2013 EC 97911-053 FG 623TM DECEMBER, 2013 EC 97911-053 3 INDEX Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI) units are found in these details: m –meter cm – centimeter mm –millimeter s –second Pa –pascal MPa –megapascal © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. PICTORIAL VIEW ..................................................................................4 NON-THERMAL FRAMING DETAILS ...................................................5 THERMAL FRAMING DETAILS .............................................................6 CORNER DETAILS .................................................................................7 WIND LOAD/DEADLOAD CHARTS ................................................. 8-12 THERMAL CHARTS........................................................................ 13-16 Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement. kawneer.com ADMD170 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FG 623TM PICTORIAL VIEW ADMD170 kawneer.com © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 4 DECEMBER, 2013 EC 97911-053 FG 623TM DECEMBER, 2013 EC 97911-053 NON-THERMAL FRAMING DETAILS SCALE 3" = 1'-0" 1 5 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 4 2 3 ELEVATION IS NUMBER KEYED TO DETAILS 1/4" SYSTEM 1" SYSTEM 623306 1 HEAD 623055 2-1/4" (57.2) 1 HEAD 2-1/4" (57.2) 623356 623005 623054 623004 6" (1524) 6" (1524) 623003 623053 2 INTERMEDIATE HORIZONTAL 2 INTERMEDIATE HORIZONTAL 623054 623004 623013 623063 3 SILL 3 SILL 071327 623010 623063 623057 623064 623065 4 JAMB kawneer.com 123302 623013 623010 623007 623024 623025 6" (1524) 6" (1524) © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 5 2-1/4" (57.2) 5 MULLION 2-9/16" (65.1) 5A EXPANSION MULLION 4 JAMB ADMD170 2-1/4" (57.2) 5 MULLION 2-9/16" (65.1) 5A EXPANSION MULLION THERMAL FRAMING DETAILS 4 2 3 ELEVATION IS NUMBER KEYED TO DETAILS 1" SYSTEM (THERMAL) 623306 4 JAMB 623205 623004 6" (1524) 623004 623213 3 SILL 123302 623010 623213 623207 ADMD170 623224 623225 2-1/4" (57.2) 2-9/16" (65.1) 5 MULLION 5A EXPANSION MULLION kawneer.com © Kawneer Company, Inc., 2013 SCALE 3" = 1'-0" Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FG 623TM Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 6" (1524) 1 HEAD 2-1/4" (57.2) 6 DECEMBER, 2013 EC 97911-053 1 5 2 INTERMEDIATE HORIZONTAL 623203 173 90° INSIDE CORNER ADMD170 123 623 223) 3 (62 135° INSIDE CORNER 623123 (623223) 90° OUTSIDE CORNER 623121 (623221) 1/4" SYSTEM 623171 623183 623173 623135 623135 623187 623137 623 (62 123 322 3) 623 (62 121 322 1) 623173 623171 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. EC 97911-053 121 623 221) 3 (62 623 171 623 171 kawneer.com 623 173 623 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. DECEMBER, 2013 FG 623TM CORNER DETAILS 1" SYSTEM (THERMAL SIMILAR) 623121 (623221) 623131 623131 623133 623123 (623223) 135° OUTSIDE CORNER 7 8 FG 623TM DECEMBER, 2013 EC 97911-053 WIND LOAD / DEADLOAD CHARTS DEAD LOAD CHARTS Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for 1" (25) thick insulating glass or 1/4" (6) thick glass supported on two setting blocks placed at the loading points shown. ADMD170 kawneer.com © Kawneer Company, Inc., 2013 Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4" above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa.). Charted curves, in all cases are for the limiting value. If the design wind load is determined through the analytical procedures of ASCE/SEI 7-10 or earlier editions, the load shall be based on the nominal loads used in allowable stress design. A 4/3 increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. WIND LOAD CHARTS FG 623TM DECEMBER, 2013 EC 97911-053 WIND LOAD CHARTS WITH HORIZONTALS 1.0 1.5 2.0 16 MULLION CENTERS IN METERS 0.5 3.5 B 10 3.0 C D 9 2.5 8 E 7 2.0 6 5 1.5 4 2 1.0 623057 0.5 I = 9.058 (000000 x 104) S = 2.849 (000000 x 103) 1 1 2 3 4 5 6 7 A 12 MULLION HEIGHT IN FEET A 11 4.0 13 MULLION HEIGHT IN METERS 3.5 B C 3.0 D E 11 10 9 2.5 8 7 2.0 6 5 1.5 4 1.0 3 2 0.5 1 0 8 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET MULLION CENTERS IN FEET WITH HORIZONTALS WITHOUT HORIZONTALS MULLION CENTERS IN METERS MULLION CENTERS IN METERS 1.0 1.5 2.0 0.5 16 15 1.5 2.0 15 4.5 14 4.5 14 4.0 A 3.5 11 B 10 3.0 C D2.5 E 9 8 7 2.0 6 5 1.5 4 3 1.0 623007 0.5 I = 8.541 (000000 x 10 ) S = 2.776 (000000 x 103) 1 3.5 9 B C3.0 D E 8 2.5 11 10 7 2.0 6 5 1.5 4 1.0 3 4 2 A 12 MULLION HEIGHT IN FEET 12 4.0 13 MULLION HEIGHT IN METERS 13 0 1.0 16 2 0.5 1 1 2 3 4 5 6 7 0 8 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET MULLION CENTERS IN FEET ADMD170 MULLION HEIGHT IN METERS MULLION HEIGHT IN FEET 4.5 MULLION HEIGHT IN METERS 4.0 3 MULLION HEIGHT IN FEET 2.0 14 12 kawneer.com 1.5 15 4.5 13 0 1.0 16 14 0.5 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 15 WITHOUT HORIZONTALS A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) MULLION CENTERS IN METERS 0.5 9 FG 623TM 10 DECEMBER, 2013 EC 97911-053 WIND LOAD CHARTS WITH HORIZONTALS A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) MULLION CENTERS IN METERS 0.5 1.0 1.5 2.0 15 4.5 WITHOUT HORIZONTALS MULLION CENTERS IN METERS 0.5 14 2.0 4.5 A3.5 12 B3.0 10 9 C 8 D E2.0 2.5 7 6 5 1.5 4 1.0 3 2 0.5 1 2 3 4 5 6 7 623207 I = 9.058 (000000 x 104) S = 2.849 (000000 x 103) 1 3.5 11 MULLION HEIGHT IN FEET 11 4.0 A 10 MULLION CENTERS IN FEET 3.0 C D E 9 2.5 8 7 2.0 6 5 1.5 4 1.0 3 2 0.5 1 0 8 B 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 13 MULLION HEIGHT IN METERS 4.0 MULLION HEIGHT IN METERS 12 MULLION HEIGHT IN FEET 1.5 14 13 0 1.0 15 WITH HORIZONTALS 1.0 1.5 2.0 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0.5 20 6.0 19 5.5 18 5.0 16 15 4.5 14 A 4.0 13 B C3.5 12 11 D 10 3.0 E 9 2.5 8 MULLION HEIGHT IN METERS MULLION HEIGHT IN FEET 17 623024 / 623025 7 2.0 6 I = 8.541 (000000 x 104) S = 2.776 (000000 x 103) 5 4 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET ADMD170 kawneer.com © Kawneer Company, Inc., 2013 MULLION CENTERS IN METERS FG 623TM DECEMBER, 2013 EC 97911-053 WIND LOAD CHARTS WITH HORIZONTALS A = 20 PSF (960) B = 30 PSF (1440) C = 40 PSF (1920) D = 50 PSF (2400) E = 60 PSF (2880) MULLION CENTERS IN METERS 0.5 1.0 1.5 2.0 20 6.0 5.5 18 5.0 16 15 4.5 14 A 4.0 13 B C3.5 D 12 11 10 3.0 E 9 2.5 8 7 MULLION HEIGHT IN METERS 17 MULLION HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 19 2.0 623064 / 623065 I = 9.058 (000000 x 104) S = 2.849 (000000 x 103) 6 5 4 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET WITH HORIZONTALS 0.5 1.0 1.5 2.0 20 6.0 19 5.5 18 5.0 MULLION HEIGHT IN FEET 16 15 4.5 14 A 4.0 13 B 12 3.5 C D 11 10 3.0 E 9 2.5 8 MULLION HEIGHT IN METERS 17 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. MULLION CENTERS IN METERS 623224 / 623225 7 2.0 6 I = 8.541 (000000 x 104) S = 2.776 (000000 x 103) 5 4 1 2 3 4 5 6 7 8 MULLION CENTERS IN FEET kawneer.com ADMD170 11 DEAD LOAD CHARTS 0 2 3 1.5 4 5 2.0 4.5 13 4.0 12 11 3.5 10 9 3.0 8 2.5 7 6 2.0 5 1.5 3 2 623203 1 B 1.0 A 0.5 6 623003 4 7 WIDTH IN FEET ADMD170 kawneer.com © Kawneer Company, Inc., 2013 FG 623TM Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1.0 HEIGHT IN METERS 15 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. HEIGHT IN FEET 12 DECEMBER, 2013 EC 97911-053 (1" INFILL) WIDTH IN METERS A = 1/4 POINT LOADING B = 1/8 POINT LOADING 14 FG 623TM DECEMBER, 2013 EC 97911-053 THERMAL CHARTS Project Specific U-Factor Example Calculation 15'-8" Frame Width 9'-6" 2'-0" D.L.O. Frame Height 7'-0" D.L.O. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 5'-0" D.L.O. Example Glass U-Factor = 0.42 Btu/hr x ft2 x °F Total Daylight Opening = 3(5' x 7') + 3(5' x 2') = 135 ft2 Total Projected Area = (Total Daylight Opening + Total Area of Framing System) = 15'-8" x 9'-6" = 148.83 ft2 Percent of Glass = (Total Daylight Opening ÷ Total Projected Area) = (135 ÷ 148.83)100 = 91% System U-Factor vs Percent of Glass Area 0.80 0.70 E n PL ig M es A rD EX Fo COG U-Factor 0.60 0.55 0.50 0.45 0.40 0.35 0.30 ) 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 © Kawneer Company, Inc., 2013 0.65 ot (N 0.25 Vision Area / Total Area % Based on 91% glass and center of glass U-Factor of 0.42 System U-Factor is equal to 0.49 Btu/hr x ft2 x °F kawneer.com ADMD170 70 75 80 85 90 91% 0.20 95 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0.75 0.49 13 ADMD170 COG U-Factor 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.50 0.40 0.30 Vision Area / Total Area % Notes for System Y-Factor, Shgc and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are base on center of glass values and are obtained from your glass supplier. kawneer.com Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 0.70 © Kawneer Company, Inc., 2013 0.60 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. THERMAL CHARTS System U-Factor (Btu/hr x ft2 x °F) FG 623TM 70 75 80 85 90 95 14 DECEMBER, 2013 EC 97911-053 System U-Factor vs Percent of Glass Area 0.80 0.20 FG 623TM DECEMBER, 2013 EC 97911-053 15 THERMAL CHARTS System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area COG SHGC 0.90 0.90 0.85 0.85 0.80 0.75 0.75 0.70 0.70 0.65 0.65 0.60 0.60 0.55 0.55 0.50 0.50 0.45 0.45 0.40 0.40 0.35 0.35 0.30 0.30 0.25 0.25 0.20 0.20 System SHGC Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 0.80 0.15 70 75 80 85 90 95 0.10 Vision Area / Total Area % (Total Daylight Opening / Projected Area) Charts are generated per AAMA 507 COG VT 0.90 0.90 0.85 0.80 0.80 0.75 0.85 0.75 0.70 0.70 0.65 0.65 0.55 0.55 0.50 0.50 0.45 0.45 0.40 0.40 0.35 0.35 0.30 0.30 0.25 0.25 0.20 0.20 0.15 Vision Area / Total Area % (Total Daylight Opening / Projected Area) kawneer.com ADMD170 70 75 80 85 90 95 0.10 System VT 0.60 0.60 © Kawneer Company, Inc., 2013 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Visible Transmittance (VT) vs Percent of Vision Area FG 623TM DECEMBER, 2013 EC 97911-053 THERMAL PERFORMANCE MATRIX (NFRC SIZE) Overall U-Factor 4 0.48 0.56 0.46 0.54 0.44 0.52 0.42 0.50 0.40 0.49 0.38 0.47 0.36 0.45 0.34 0.44 0.32 0.42 0.30 0.40 0.28 0.39 0.26 0.37 0.24 0.35 0.22 0.34 0.20 0.32 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall Glass U-Factor 4 Glass VT 3 Overall VT 4 0.90 0.82 0.90 0.80 0.85 0.77 0.85 0.75 0.80 0.73 0.80 0.71 0.75 0.69 0.75 0.66 0.70 0.64 0.70 0.62 0.65 0.60 0.65 0.58 0.60 0.55 0.60 0.53 0.55 0.51 0.55 0.49 0.50 0.46 0.50 0.44 0.45 0.42 0.45 0.40 0.40 0.37 0.40 0.35 0.35 0.33 0.35 0.31 0.30 0.29 0.30 0.27 0.25 0.24 0.25 0.22 0.20 0.20 0.20 0.18 NOTE: For glass values that are not listed, linear interpolation is permitted. 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with NFRC 200. 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). ADMD170 kawneer.com © Kawneer Company, Inc., 2013 Glass U-Factor 3 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. Thermal Transmittance1 (BTU/hr • ft 2 • °F) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 16