VLMRY3420 www.vishay.com Vishay Semiconductors Bicolor SMD LED PLCC-4 FEATRUES • SMD LED with exceptional brightness • Multicolored • Luminous intensity categorized • EIA and ICE standard package • Compatible equipment with automatic placement • Compatible with IR reflow, vapor phase and wave soldering processes according to CECC 00802 and J-STD-020 19211 DESCRIPTION These devices have been designed to meet the increasing demand for surface mounting technology. • Available in 8 mm tape • Low profile package The package of the VLMRY3420 is the PLCC-4. • Non-diffused lens: excellent for coupling to light pipes and backlighting It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Low power consumption • Luminous intensity IVmax./IVmin. ≤ 1.6 This SMD device consists of a amber and yellow chip. So it is possible to choose the color in one device. ratio in one packaging unit • Preconditioning according to JEDEC® level 4 PRODUCT GROUP AND PACKAGE DATA • Product group: LED • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Package: SMD PLCC-4 • AEC-Q101 qualified • Product series: bicolor • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Angle of half intensity: ± 60° APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at IF at IF at IF (mcd) (nm) (V) (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. TECHNOLOGY VLMRY3420-GS08 Amber 355 - 900 50 - 617 - 50 - 2.1 2.6 50 VLMRY3420-GS08 Yellow 560 - 1120 50 581 588 594 50 - 2.1 2.6 50 AlInGaP on GaAs VLMRY3420-GS18 Amber 355 - 900 50 - 617 - 50 - 2.1 2.6 50 AlInGaP on GaAs VLMRY3420-GS18 Yellow 560 - 1120 50 581 588 594 50 - 2.1 2.6 50 AlInGaP on GaAs Rev. 1.4, 04-Dec-15 AlInGaP on GaAs Document Number: 81304 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMRY3420 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMRY3420 PARAMETER TEST CONDITION SYMBOL VALUE Reverse voltage per diode (1) IR = 10 μA VR 5 V DC forward current per diode Tamb ≤ 65 °C IF 50 mA Surge forward current per diode UNIT IFSM 0.1 A Power dissipation per diode PV 130 mW Junction temperature Tj 125 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C RthJA 480 650 K/W Thermal resistance junction / ambient Mounted on PC board (pad size > 16 mm2) 1 chip on 2 chips on Note (1) Driving the LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMRY3420, AMBER PARAMETER Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse current Junction capacitance TEST CONDITION IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA VR = 5 V VR = 0 V, f = 1 MHz PART VLMRY3420 SYMBOL IV λd λp ϕ VF IR Cj MIN. 355 - TYP. 617 624 ± 60 2.1 15 MAX. 900 2.6 10 - UNIT mcd nm nm deg V μA pF OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMRY3420, YELLOW PARAMETER Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse current Junction capacitance TEST CONDITION IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA VR = 5 V VR = 0 V, f = 1 MHz PART VLMRY3420 SYMBOL IV λd λp ϕ VF IR Cj MIN. 560 581 - TYP. 588 590 ± 60 2.1 15 MAX. 1120 594 2.6 10 - UNIT mcd nm nm deg V μA pF CROSSING TABLE VISHAY OSRAM VLMRY3420 LAYT67B LUMINOUS INTENSITY CLASSIFICATION AND GROUP COMBINATIONS, VLMRY3420 RED Y E L L O W T2 355 mcd to 450 mcd U1 450 mcd to 560 mcd U2 560 mcd to 710 mcd V1 710 mcd to 900 mcd U2 560 mcd to 710 mcd VLMRY3420 VLMRY3420 VLMRY3420 VLMRY3420 V1 710 mcd to 900 mcd VLMRY3420 VLMRY3420 VLMRY3420 VLMRY3420 V2 900 mcd to 1120 mcd VLMRY3420 VLMRY3420 VLMRY3420 VLMRY3420 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. Rev. 1.4, 04-Dec-15 Document Number: 81304 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMRY3420 www.vishay.com Vishay Semiconductors COLOR CLASSIFICATION DOMINANT WAVELENGTH (nm) GROUP YELLOW MIN. MAX. 1 581 584 2 583 586 3 585 588 4 587 590 5 589 592 6 591 594 Note • Wavelengths are tested at a current pulse duration of 25 ms. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 1 chip on 40 2 chips on 30 20 10 0 0 20087 20 40 60 80 100 120 40° 1.0 60° 70° 80° 0.6 0.4 0.2 0 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement IV rel. - Relative Luminous Intensity IF - Forward Current (A) 0.8 1.2 0.08 tp/T = 0.005 0.05 0.5 0.06 0.04 for one chip operation only yellow 1.0 0.8 0.6 0.4 0.2 0 10-4 10-3 10-2 10-1 100 101 540 102 tp - Pulse Length (s) Fig. 2 - Forward Current vs. Pulse Duration Rev. 1.4, 04-Dec-15 50° 95 10319 0.10 20085 0.9 0.7 0.12 0.00 10-5 20° 30° Tamb - Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature 0.02 10° ϕ - Angular Displacement 50 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 60 16008 560 580 600 620 640 λ - Wavelength (nm) Fig. 4 - Relative Intensity vs. Wavelength Document Number: 81304 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMRY3420 www.vishay.com Vishay Semiconductors 10.00 Amber 1.1 I Vrel - Relative Luminous Intensity I Vrel - Relative Luminous Intensity 1.2 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 570 580 590 600 610 620 630 640 650 660 670 λ - Wavelength (nm) 1.00 0.10 0.01 1.00 0.0 20171 Amber 20172 Fig. 5 - Relative Intensity vs. Wavelength 2.5 IV rel - Relative Luminous Intensity 90 amber yellow I F - Forward Current (mA) 80 70 60 50 40 30 20 10 0 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 V F - Forward Voltage (V) Fig. 6 - Relative Forward Voltage vs. Ambient Temperature yellow 2.0 1.5 1.0 0.5 0.0 - 50 17016 - 25 0 25 50 75 100 Tamb - Ambient Temperature (°C) Fig. 9 - Relative Luminous Intensity vs. Ambient Temperature 2.5 10 yellow I Vrel -Relative Luminous Intensity IV rel - Relative Luminous Intensity 100.00 Fig. 8 - Relative Luminous Intensity vs. Forward Current 100 20170 10.00 IF - Forward Current (mA) 1 0.1 17018 10 100 IF - Forward Current (mA) Fig. 7 - Relative Luminous Intensity vs. Forward Current Rev. 1.4, 04-Dec-15 1.5 1.0 0.5 0.0 - 50 0.01 1 Amber 2.0 20174 - 25 0 25 50 75 Tamb - Ambient Temperature (°C) 100 Fig. 10 - Relative Luminous Intensity vs. Ambient Temperature Document Number: 81304 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMRY3420 Vishay Semiconductors 6 yellow 4 2 0 -2 -4 -6 - 50 - 25 0 25 50 75 100 Tamb - Ambient Temperature (°C) 17017 250 30 mA 200 50 mA yellow 150 100 50 0 10 mA - 50 - 100 - 150 - 200 - 50 - 25 0 25 50 75 100 Tamb - Ambient Temperature (°C) 17015 Fig. 13 - Change of Forward Voltage vs. Ambient Temperature Amber 4 2 0 -2 -4 -6 - 50 20173 - 25 0 25 50 75 100 Tamb - Ambient Temperature (°C) VF - Change of Forward Voltage (mV) 6 d - Change of Dom. Wavelength (nm) Fig. 11 - Change of Dominant Wavelength vs. Ambient Temperature Δ VF - Change of Forward Voltage (mV) Δλd - Change of Dom. Wavelength (nm) www.vishay.com 250 200 Rev. 1.4, 04-Dec-15 Amber 100 50 30 mA 0 - 50 10 mA - 100 - 150 - 200 - 50 20175 Fig. 12 - Change of Dominant Wavelength vs. Ambient Temperature 50 mA 150 - 25 0 25 50 75 Tamb - Ambient Temperature (°C) 100 Fig. 14 - Change of Forward Voltage vs. Ambient Temperature Document Number: 81304 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMRY3420 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Mounting Pad Layout 4 0.5 4 2.6 (2.8) 1.2 1.6 (1.9) area covered with solder resist Dimensions: IR and Vaporphase (Wave Soldering) 19899 Rev. 1.4, 04-Dec-15 Document Number: 81304 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMRY3420 www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Component cavity 14.4 max. 321 329 18857 Fig. 17 - Reel Dimensions - GS18 94 8670 SOLDERING PROFILE TAPING OF VLM.3... 3.5 3.1 IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC level 4 2.2 2.0 300 8.3 7.7 1.85 1.65 Temperature (°C) 3.6 3.4 4.0 3.6 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 5.75 5.25 4.1 3.9 62.5 60.0 Identification Label: Vishay type group tape code production code quantity Blister tape 1.6 1.4 13.00 12.75 2.5 1.5 Adhesive tape 200 max. 30 s 150 max. 100 s max. 120 s 100 0.25 4.1 3.9 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 2.05 1.95 94 8668 0 Fig. 15 - Tape Dimensions in mm for PLCC-2 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 0 250 300 max. 2 cycles allowed 5s 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 200 TTW Soldering (acc. to CECC00802) Temperature (°C) 2.5 1.5 150 Time (s) 300 250 4.5 3.5 100 Fig. 18 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) 10.0 9.0 120° 50 19470-7 235 °C to 260 °C first wave 200 lead temperature second full line: typical wave dotted line: process limits ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s 100 2 K/s ca. 5 K/s 50 forced cooling 180 178 14.4 max. Fig. 16 - Reel Dimensions - GS08 0 0 94 8665 948626-1 50 100 150 200 250 Time (s) Fig. 19 - Double Wave Soldering of Opto Devices (all Packages) Rev. 1.4, 04-Dec-15 Document Number: 81304 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMRY3420 www.vishay.com Vishay Semiconductors DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. CAUTION LEVEL This bag contains MOISTURE-SENSITIVE DEVICES Aluminum bag 4 1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative humidity (RH) Label 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260 °C) must be: 2a. Mounted within 72 hours at factory condition of < 30 °C / 60 % RH or 2b. Stored at ≤ 10 % RH 3. Devices require baking befor mounting if: Humidity Indicator Card is > 10 % when read at 23 °C ± 5 °C or 2a. or 2b. is not met. Reel 15973 4. If baking is required, devices may be baked for: 192 hours at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or 24 hours at 100 °C ± 5 °C not suitable for reels or tubes Bag Seal Date: (If blank, see barcode label) FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. Note: Level defined by EIA JEDEC Standard JESD22-A113 22860 Example of JESD22-A112 level 4 label RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 72 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABELS The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. An EIA JEDEC standard JESD22-A112 level 4 label is included on all dry bags. Rev. 1.4, 04-Dec-15 Document Number: 81304 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000