® POSIWIRE ® Cable Extension Position Sensors WS17KT Position Sensor Datasheet POSIWIRE® WS17KT Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by ASM for any consequence of its use. Publication thereof does not convey nor imply any license under patent or industrial or intellectual property rights. Applications that are described herein for any of these products are for illustrative purpose only. ASM makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 2/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Analog output, SSI output ............................................................................................................................... 4 Specifications ................................................................................................................................................. 4 Order code ..................................................................................................................................................... 6 Dimensions ....................................................................................................................................................... 7 Measurement range 1500 … 2000 … 2500 mm, analog output, SSI output................................................. 7 Measurement range 3000 ... 4000 mm, analog output, SSI output ............................................................... 8 Measurement range 5000 … 6250 mm, analog output, SSI output .............................................................. 9 Measurement range 10000 … 12500 … 15000 mm, analog output, SSI output......................................... 10 Output specifications ..................................................................................................................................... 11 Analog outputs ............................................................................................................................................. 11 Voltage divider R1K .................................................................................................................................. 11 Signal conditioner 10V and 10V5 ............................................................................................................. 12 Signal conditioner 420A ........................................................................................................................... 13 Signal conditioner 420T ............................................................................................................................ 14 Signal conditioner PMUI / PMUV ............................................................................................................. 15 Signal conditioner ADSI ............................................................................................................................... 17 Accessories ..................................................................................................................................................... 19 Connector cable M12, 8 pin ......................................................................................................................... 19 Plug-in connectors ....................................................................................................................................... 20 Plug-in connector M12, 8 pin (straight coupling) ...................................................................................... 20 Plug-in connector CONIN, 12 pin (straight coupling) ............................................................................... 20 DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 3/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Analog output, SSI output Sensor features • Measurement range up to 15000 mm • Protection class IP64 (optional IP66) • Analog output, SSI output Specifications = Potentiometer 1 kΩ = Voltage 0 ... 10 V = Current 4 ... 20 mA, 2 wire = Current 4 ... 20 mA, 3 wire = Current output, programmable = Voltage output, programmable = Signal conditioner SSI 12 bit,replaced by MSSI12 = Signal conditioner SSI 14 bit,replaced by MSSI14 = Signal conditioner SSI 16 bit,replaced by MSSI16 Output R1K 10V 420A 420T PMUI PMUV ADSI ADSI14 ADSI16 Resolution Analog: quasi infinite Linearity ±0.10% f.s. (standard) ±0.05% f.s. (optional) Sensing device Precision potentiometer Housing material Aluminium, stainless steel and plastic measuring cable: stainless steel Protection class IP64 (optional IP66) Connection Connector M12, 8 pin Temperature range -20 ... +85 °C Weight see table "Cable forces" EMC DIN EN 61326-1:2013 DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 4/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Cable forces typical at = 20 °C DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH Measurement range [mm] Weight approx. [kg] Maximum pull-out force [N] Minimum pull-in force [N] 1500 1.4 11.0 6.2 2000 1.4 8.5 4.8 2500 1.5 5.5 3.5 3000 2.9 14.5 10.3 4000 2.9 12.7 9.1 5000 5.3 13.0 9.3 6250 5.5 10.2 7.3 10000 6.0 16.5 9.1 12500 6.0 16.5 9.1 15000 6.0 16.5 9.1 5/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Order code WS17KT – 1 – 2 – 3 4 – – 5 1 Measurement range (in mm) 1500 / 2000 / 2500 / 3000 / 4000 / 5000 / 6250 / 10000 / 12500 / 15000 2 Output R1K 10V 420A 420T PMUI PMUV = Potentiometer 1 kΩ = Voltage 0 ... 10 V = Current 4 ... 20 mA, 2 wire = Current 4 ... 20 mA, 3 wire = Current output, programmable = Voltage output, programmable ADSI ADSI14 ADSI16 = Signal conditioner SSI 12 bit,replaced by MSSI12 = Signal conditioner SSI 14 bit,replaced by MSSI14 = Signal conditioner SSI 16 bit,replaced by MSSI16 3 Linearity L10 L05 = ±0.10% f.s. (standard) = ±0.05% f.s. (optional) 4 Cable fixing M4 SB0 = M4 cable fixing = cable clip 5 Connection M12 = Connector M12, 8 pin Order example WS17KT – 2500 – 10V – L10 – M4 – M12 Accessories: Connector cable (see page 19) DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 6/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Dimensions Measurement range 1500 … 2000 … 2500 mm, analog output, SSI output Dimensions in mm Measurement range A 1500 2000 2500 67.5 75.5 82.5 Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory. DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 7/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Measurement range 3000 ... 4000 mm, analog output, SSI output Dimensions in mm Measurement range A 3000 4000 105 120 Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory. DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 8/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Measurement range 5000 … 6250 mm, analog output, SSI output Dimensions in mm Measurement range A 5000 6250 178 198 Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory. DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 9/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Measurement range 10000 … 12500 … 15000 mm, analog output, SSI output Dimensions in mm [inch] Dimensions informative only. For guaranteed dimensions consult factory. DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 10/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Output specifications Analog outputs Voltage divider R1K Potentiometer Excitation voltage 32 V DC max. at 1 kΩ (max. power 1 W) Potentiometer impedance 1 kΩ ±10 % Thermal coefficient ±25 x 10 / °C f.s. Sensitivity Depends on the measuring range, individual sensitivity of the sensor is specified on the label Voltage divider utilization range approx. 3 % … 97 % Operating temperature Refer to output specification EMC DIN EN 61326-1:2013 -6 Output signals R1K + Excitation Metal wiper Note: The metal wiper of the potentiometer must be protected against current load! Electrical current flow impact on the wiper causes linearity errors and shortens the lifetime of the potentiometer. Additional information: http://www.asm-sensor.com/asm/pdf/pro/ws_poti_technote_en.pdf GND Signal wiring Signal Connector pin no. Cable color Cable color Poti + 1 white brown Poti GND 2 brown white Poti slider 3 green blue - 4 yellow black - 5 grey - - 6 pink - - 7 blue - - 8 red - View to sensor connector CONN-M12-8F DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 11/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Signal conditioner 10V and 10V5 Voltage output Excitation voltage Excitation current Output voltage Output current Output load Stability (temperature) Protection Output noise Operating temperature EMC 18 ... 27 V DC non stabilized 20 mA max. 10V: 0 ... 10 V DC; 10V5: 0.5 ... 10 V DC 2 mA max. > 5 kΩ -6 ±50 x 10 / °C f.s. Reverse polarity, short circuit 0.5 mVRMS Refer to output specification DIN EN 61326-1:2013 Output signals Excitation + 10 V 0 … 10 V Excitation GND Signal + Signal GND Signal wiring Signal Excitation + Excitation GND Signal + Signal GND Not connected Not connected Not connected Not connected DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH Connector pin no. Cable color 1 2 3 4 5 6 7 white brown green yellow grey pink blue red 8 12/20 View to sensor connector CONN-M12-8F www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Signal conditioner 420A Excitation voltage 12 ... 27 V DC non stabilized, measured at the sensor terminals 35 mA max. 4 ... 20 mA equivalent for 0 ... 100 % range -6 ±100 x 10 / °C f.s. Reversed polarity, short circuit 0.5 mVeff Refer to output specification DIN EN 61326-1:2013 Current output (2 wire) Excitation current Output current Stability (temperature) Protection Output noise Operating temperature EMC Output signals Signal + 420A 4 … 20 mA Signal - Signal wiring Signal Signal + Signal Not connected Not connected Not connected Not connected Not connected Not connected DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH Connector pin no. Cable color 1 2 3 4 5 6 7 white brown green yellow grey pink blue 8 red 13/20 View to sensor connector CONN-M12-8F www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Signal conditioner 420T Current output (3 wire) Excitation voltage Excitation curren Load resistor Output current Stability (temperature) Protection Output noise Operating temperature EMC 18 ... 27 V DC non stabilized 40 mA max. 350 Ω max. 4 ... 20 mA equivalent for 0 ... 100 % range -6 ±50 x 10 / °C f.s. Reverse polarity, short circuit 0.5 mVRMS Refer to output specification DIN EN 61326-1:2013 Output signals Excitation + 420T 4 … 20 mA Signal + Excitation GND Signal wiring Signal Connector pin no. Cable color Excitation + 1 white Excitation GND 2 brown Signal + 3 green Not connected 4 yellow Not connected 5 grey Not connected 6 pink Not connected 7 blue Not connected 8 red DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 14/20 View to sensor connector CONN-M12-8F www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Signal conditioner PMUI / PMUV Voltage or current output (3 wire) Excitation voltage Excitation current Voltage output PMUV Output current Output load Current output PMUI Working resistance Scaling Activation of offset and gain adjust Scalable range Stability (temperature) Operating temperature Protection EMC 18 … 27 V DC 50 mA max. 0 … 10 V 10 mA max. 1 kΩ min. 4 … 20 mA (3 wire) 500 Ω max. Connect with excitation GND (0 V) 90 % max. f.s. -6 ±50 x 10 / °C f.s. Refer to output specification Reversed polarity, short circuit DIN EN 61326-1:2013 Output signals Excitation + Excitation GND Signal + PMUV PMUI Signal GND ZERO END DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 15/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Signal wiring PMUV / PMUI Signal View to sensor connector Connector pin no. Cable color Excitation + 1 white Excitation GND 2 brown Signal + 3 green Signal GND 4 yellow Not connected 5 grey Not connected 6 pink ZERO 7 blue END 8 red CONN-M12-8F Connector pin no. Cable color View to sensor connector Excitation + 1 white Excitation GND 2 brown Not connected 3 green Not connected 4 yellow Signal + 5 grey Signal GND 6 pink ZERO 7 blue END 8 red Signal wiring PMUI2 Signal DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 16/20 CONN-M12-8F www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Signal conditioner ADSI A/D converted synchronous serial Excitation volatge Excitation current Interface Clock frequency Code Delay between pulse trains Resolution Stability (temperature) Operating temperature EMC Data format 11 ... 27 V DC 200 mA max. EIA RS422, RS485, short-circuit proof 70 ... 500 kHz Gray-Code, continuous progression 30 μs min. ADSI16: 16 bit (65536 counts) f.s. ADSI14: 14 bit (16384 counts) f.s. ADSI: 12 bit (4096 counts) f.s. -6 ±50 x 10 / °C f.s. -20 ... +85 °C DIN EN 61326-1:2013 CLOCK+ (train of 26 pulses) DATA+ Recommended processing circuit Transmission rate DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH Cable length Baud rate < 50 m < 100 m < 300 kHz < 100 kHz 17/20 Note: Extension of the cable length will reduce the maximum transmission rate. www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Signal wiring Signal Excitation + Excitation GND (0 V) CLOCK CLOCK DATA DATA Shield, not connected Not connected DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH Connector pin no. Cable color 1 2 3 4 white brown green yellow 5 6 grey pink 7 8 blue red 18/20 View to sensor connector CONN-M12-8F www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Accessories Connector cable M12, 8 pin (angular coupling) shielded connector The 8-lead shielded cable is supplied with a mating 8-pin 90° M12 connector at one end and 8 wires at the other end. Available lengths are 2m, 5m and 10m. Wire: cross sectional area 0.25mm² Cable diameter: 6.3 ±0.2mm Order code KAB - xM - M12/8F/W - LITZE IP69: KAB - xM - M12/8F/W/69K - LITZE xM = length in m Connector cable M12, 8 pin (straight coupling) shielded connector The 8-lead shielded cable is supplied with a mating 8-pin M12 connector at one end and 8 wires at the other end. Available lengths are 2m, 5m and 10m. Wire: cross sectional area 0.25mm² Cable diameter: 6.3 ±0.2mm Order code KAB - xM - M12/8F/G - LITZE IP69: KAB - xM - M12/8F/G/69K - LITZE xM = length in m Plug connection / cable color Signal wiring M12, 8 pin DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 1 2 3 4 5 6 7 8 white brown green yellow grey pink blue red 19/20 www.asm-sensor.com USA: www.asmsensors.com POSIWIRE® WS17KT Plug-in connectors Plug-in connector M12, 8 pin (straight coupling) Order code: CONN-M12-8F-G Cable diameter max. 6 … 8 mm Plug-in connector CONIN, 12 pin (straight coupling) Order code: CONN-CONIN-12F-G Cable diameter max. 6 … 8 mm DB-WS17KT-E-2016-06 1.0.0 | © ASM GmbH 20/20 www.asm-sensor.com USA: www.asmsensors.com