VS-MB High Voltage Series Datasheet

VS-MB High Voltage Series
www.vishay.com
Vishay Semiconductors
Single Phase Bridge
(Power Modules), 25 A/35 A
FEATURES
• Universal, 3 way terminals:
push-on, wrap around or solder
• High thermal conductivity package, electrically
insulated case
RoHS
COMPLIANT
• Center hole fixing
• Excellent power/volume ratio
• Nickel plated terminals solderable using lead (Pb)-free
solder; solder alloy Sn/Ag/Cu (SAC305); solder
temperature 260 °C to 275 °C
• UL E300359 approved
D-34
• Designed and qualified for industrial and consumer level
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT SUMMARY
IO
25 A to 35 A
VRRM
1400 V to 1600 V
Package
D-34
Circuit
Single Phase Bridge
DESCRIPTION
A range of extremely compact, encapsulated single phase
bridge rectifiers offering efficient and reliable operation.
They are intended for use in general purpose and
instrumentation applications.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IO
IFSM
I2t
VRRM
VALUES
26MB-A
VALUES
36MB-A
UNITS
25
35
A
TC
70
55
°C
50 Hz
400
475
60 Hz
420
500
50 Hz
790
1130
60 Hz
725
1030
Range
TJ
A
A2s
1400 to 1600
V
- 55 to 150
°C

ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE
NUMBER
VOLTAGE
CODE
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
26MB..A
36MB..A
140
1400
1500
160
1600
1700
Revision: 10-Jul-13
IRRM MAXIMUM
AT TJ MAXIMUM
mA
2
Document Number: 93564
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-MB High Voltage Series
www.vishay.com
Vishay Semiconductors
FORWARD CONDUCTION
PARAMETER
Maximum DC output current
at case temperature
VALUES
26MB-A
VALUES
36MB-A
Resistive or inductive load
25
35
Capacitive load
20
28
SYMBOL
IO
TEST CONDITIONS
t = 10 ms
Maximum peak, one cycle
non-repetitive forward current
IFSM
t = 8.3 ms
t = 10 ms
t = 8.3 ms
t = 10 ms
Maximum I2t for fusing
I2t
t = 8.3 ms
t = 10 ms
t = 8.3 ms
Maximum I2t for fusing
I2t
No voltage
reapplied
100 % VRRM
reapplied
No voltage
reapplied
Initial 
TJ = TJ maximum
100 % VRRM
reapplied
65
60
400
475
420
500
335
400
350
420
790
1130
725
1030
560
800
512
730
I2t for time tx = I2t x tx;
0.1  tx  10 ms, VRRM = 0 V
5.6
11.3
Low level of threshold voltage
VF(TO)1
(16.7 % x  x IF(AV) < I <  x IF(AV)), 
TJ maximum
0.70
0.74
High level of threshold voltage
VF(TO)2
(I >  x IF(AV)), TJ maximum
0.75
0.79
UNITS
A
°C
A
A2s
kA2s
V
Low level forward slope resistance
rt1
(16.7 % x  x IF(AV) < I <  x IF(AV)), 
TJ maximum
7.0
5.5
High level forward slope resistance
rt2
(I >  x IF(AV)), TJ maximum
6.4
5.2
1.25
1.3
V
Maximum forward voltage drop
VFM
TJ = 25 °C, IFM = 40 Apk (26MB)
TJ = 25 °C, IFM = 55 Apk (36MB)
Maximum DC reverse current per diode
IRRM
TJ = 25 °C, at VRRM
RMS isolation voltage base plate
VISOL
f = 50 Hz, t = 1 s
tp = 400 μs
m
10
10
µA
2700
2700
V
VALUES
26MB-A
VALUES
36MB-A
UNITS
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
Junction and storage
temperature range
SYMBOL
TJ, TStg
Maximum thermal resistance,
junction to case per bridge
RthJC
Maximum thermal resistance,
case to heatsink
RthCS
Mounting torque ± 10 %
Approximate weight
Revision: 10-Jul-13
TEST CONDITIONS
- 55 to 150
1.7
°C
1.35
K/W
Mounting surface, smooth, flat and greased
0.2
Bridge to heatsink
2.0
Nm
20
g
Document Number: 93564
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-MB High Voltage Series
Vishay Semiconductors
1000
150
Instantaneous Forward Current (A)
Maximum Allowable Case temperature (°C)
www.vishay.com
26MB..A Series
130
110
180°
(Rect)
90
180°
(Sine)
70
Tj = 150°C
100
26MB..A Series
1
0.5
50
0
5
10
15
20
25
30
1
1.5
2
2.5
3
3.5
Instantaneous Forward Voltage (V)
Average Forward Current (A)
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Forward Voltage Drop Characteristics
50
26MB..A Series
Tj = 150°C
180°
(Sine)
=
R
20
3K
/W
4K
/W
5K
/W
ta
el
-D
180°
(Rect)
30
K/
W
W
K/
2
1
40
A
hS
Rt
Maximum Average Forward Power Loss (W)
Tj = 25°C
10
7 K/W
10
10 K
/W
0
0
5
10
15
20
Average Forward Current (A)
25
0
25
50
75
100
125
150
Maximum Allowable Ambient Temperature (°C)
400
Peak Half Sine Wave Forward Current (A)
Peak Half Sine Wave Forward Current (A)
Fig. 3 - Total Power Loss Characteristics
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge
Initial Tj = 150°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
350
300
250
200
150
26MB..A series
100
1
10
100
Number of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 4 - Maximum Non-Repetitive Surge Current
Revision: 10-Jul-13
450
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration.
Initial Tj = 150 °C
No Voltage Reapplied
350
Rated Vrrm Reapplied
250
150
26MB..A Series
50
0.01
0.1
1
Pulse Train Duration (s)
Fig. 5 - Maximum Non-Repetitive Surge Current
Document Number: 93564
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-MB High Voltage Series
Vishay Semiconductors
1000
150
Instantaneous Forward Current (A)
Maximum Allowable Case temperature (°C)
www.vishay.com
36MB..A Series
130
110
180°
(Rect)
90
180°
(Sine)
70
Tj = 150°C
100
10
36MB..A Series
1
0.5
50
0
5
10
15
20
25
30
35
40
1
1.5
2
2.5
3
3.5
Instantaneous Forward Voltage (V)
Average Forward Current (A)
Fig. 6 - Current Ratings Characteristics
Maximum Average Forward Power Loss (W)
Tj = 25°C
Fig. 7 - Forward Voltage Drop Characteristics
80
36MB..A Series
Tj = 150°C
Rt
hS
A
180°
(Sine)
60
180°
(Rect)
40
=
1K
/W
2K
/W
0.
7
K/
W
-D
elt
a
R
3K
/W
4 K/W
5 K/W
20
7 K/W
0
0
5
10
15
20
25
30
Average Forward Current (A)
35
0
25
50
75
100
125
150
Maximum Allowable Ambient Temperature (°C)
450
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
Initial Tj = 150°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
400
350
300
250
200
150
36MB..A Series
100
1
10
100
Number of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 9 - Maximum Non-Repetitive Surge Current
Revision: 10-Jul-13
Peak Half Sine Wave Forward Current (A)
Peak Half Sine Wave Forward Current (A)
Fig. 8 - Total Power Loss Characteristics
500
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration.
Initial Tj = 150°C
No Voltage Reapplied
400
Rated Vrrm Reapplied
450
350
300
250
200
150
36MB..A Series
100
0.01
0.1
1
Pulse Train Duration (s)
Fig. 10 - Maximum Non-Repetitive Surge Current
Document Number: 93564
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-MB High Voltage Series
www.vishay.com
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
36
MB
160
A
1
2
3
4
5
1
-
Vishay Semiconductors product
2
-
Current rating code
3
-
Circuit configuration:
4
-
Voltage code x 10 = VRRM
5
-
Diode bridge rectifier:
26 = 25 A (average)
36 = 35 A (average)
MB = Single phase european coding
A = 26 MB, 36 MB series
CIRCUIT CONFIGURATION
+
~
-
LINKS TO RELATED DOCUMENTS
Dimensions
Revision: 10-Jul-13
www.vishay.com/doc?95326
Document Number: 93564
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
D-34
DIMENSIONS in millimeters (inches)
0.8 ± 0.05
(0.03 ± 0.002)
6.35 ± 0.1
(0.25 ± 0.004)
10.5 ± 0.15
(0.41 ± 0.006)
20.3 ± 0.15
(0.80 ± 0.006)
-
~
21.5
+ 1.0
- 0.5
+ 0.039
(0.85
)
- 0.020
28.5 ± 0.15
(1.12 ± 0.006)
9.5 ± 0.5
(0.37 ± 0.020)
12.7 ± 0.1
(0.5 ± 0.004)
+
~
5.25 ± 0.15
(0.21 ± 0.006)
12.7 ± 0.1
(0.5 ± 0.004)
28.5 ± 0.15
(1.12 ± 0.006)
Not to scale
Suggested plugging force:
200 N max; axially applied to fast-on terminals
Document Number: 95326
Revision: 07-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000