PowerPlus DC • Optically Isolated MOSFET output • Ratings from 10A to 20A @ 150 VDC and 10 & 20A @ 300 VDC • AC control • Relays are easily paralleled for higher-current applications • LED Status Indicator • Optional IP20 Cover • UL Recognized, CE and RoHS Compliant PRODUCT SELECTION Control Voltage 10A 90-140 VAC 20A DC200A10 DC200A20 10A DC400A10 AVAILABLE OPTIONS Control Voltage A: 90-140 VAC Series DC Cover Blank: Not Included C: Included 200 A Operating Voltage 200: 7-150 VDC 400: 7-300 VDC 40 C Thermal Pad Blank: Not Included H: Included H Rated Load Current 10: 10 Amps 20: 20 Amps (Not valid with 400A suffix) 40: 40 Amps (Not valid with 400x suffixes) OUTPUT SPECIFICATIONS (1) Description Operating Voltage [Vdc] (2) Blocking Voltage Rated Load Current [Adc] (3) Minimum Load Current [mA] (4) Maximum Surge Current [Adc] (10ms) Maximum On-State Voltage Drop @ Rated Current [Vdc] Maximum Off-State Leakage Current @ Rated Voltage [mA] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum On-State Resistance @ Rated Current [RDS-ON][mOhms] 10A 1-150 VDC 200 10 2.5 71 0.66 0.2 1.05 66 20A 1-150 VDC 200 20 2.5 71 1.1 0.2 0.85 51 20A 1-300 VDC 400 20 2.5 48 3 0.4 0.45 155 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Input Current @ min Control Voltage [mA] Maximum Input Current @ max Control Voltage [mA] Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (5) Ambient Storage Temperature Range Housing Material Weight (typical) (6) Encapsulation (7) Terminal Finish Recommended Terminal Screw Torque (6-32) [in lbs/Nm] Recommended Terminal Screw Torque (8-32) [in lbs/Nm] GENERAL NOTES 1) All parameters at 40°C and per section unless otherwise specified. 2) Maximum voltage is 200 and 400VDC 3) Heat sinking required, see derating curves. 4) Low current loads and high ambient temperature can affect turn-on time. 5) Maximum Ambient Operating Temperature for the AC control relays is 65°C. 6) Typical weight for the AC control relays is 2.99 oz/85g. 7) AC controlled relays contain thermal conductive epoxy MECHANICAL SPECIFICATIONS DCxxxAxx 90-140 VAC 11 13 Current Regulated 10 10 Parameters 2500 Vrms 109 Ohm 10 pF -30 to 80°C -40 to 125 °C Valox 420 SEO Black, UL 94 V-0 2.65 oz (75g) Thermally conductive Epoxy Electroless Nickel 10/1.1 20/2.2 WIRING DIAGRAM THERMAL DERATE INFORMATION THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 Electrostatic Discharge Level 3, Criteria A IEC 61000-4-4 Electrically Fast Transients Level 3, Criteria A IEC 61000-4-5 Electrical Surges Level 3, Criteria A E116950 072312 ANNEX - ENVIROMENTAL INFORMATION