PowerPlus DC • Optically Isolated MOSFET output • Ratings from 10A to 100A @ 72 VDC • AC and DC control • Relays are easily paralleled for higher-current applications • LED Status Indicator • Optional IP20 Cover • UL Recognized, CE and RoHS Compliant • PWM to 1K Hz PRODUCT SELECTION Control Voltage 4-32 VDC 90-140 VAC 10A 20A 40A 60A 80A 100A DC100D10 DC100A10 DC100D20 DC100A20 DC100D40 DC100A40 DC100D60 DC100A60 DC100D80 DC100D100 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage [Vdc] (2) Blocking Voltage Rated Load Current [Adc] (3) Minimum Load Current [mA] (4) Maximum Surge Current [Adc] (10ms) Maximum On-State Voltage Drop @ Rated Current [Vdc] Maximum Off-State Leakage Current @ Rated Voltage [mA] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum On-State Resistance @ Rated Current [RDS-ON][mOhms] Maximum PWM [Hz] (5) 10A 20A 40A 60A 80A 100A 1-72 VDC 100 10 2.5 66 0.32 0.15 1.44 32 1K 1-72 VDC 100 20 2.5 91 0.34 0.15 0.85 17 1K 1-72 VDC 100 40 2.5 136 0.6 0.15 0.78 15 900 1-72 VDC 100 60 2.5 167 00.6 0.15 0.58 10 900 7-72 VDC 100 80 2.5 215 0.72 0.15 0.55 9 700 7-72 VDC 100 100 2.5 272 0.56 0.15 0.42 5.6 700 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Input Current @ min Control Voltage [mA] Maximum Input Current @ max Control Voltage [mA] Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] DCxxxDxx DCxxxAxx 4-32 VDC 11 12 Current Regulated 0.075 0.32 90-140 VAC 11 13 Current Regulated 10 10 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (6) Ambient Storage Temperature Range Housing Material Weight (typical) (7) Encapsulation (8) Terminal Finish Recommended Terminal Screw Torque (6-32) [in lbs/Nm] Recommended Terminal Screw Torque (8-32) [in lbs/Nm] GENERAL NOTES 1) All parameters at 40°C and per section unless otherwise specified. 2) Maximum voltage is 100VDC 3) Heat sinking required, see derating curves. 4) Low current loads and high ambient temperature can affect turn-on time. 5) @ a minimum of 8VDC control. See PWM Derating Information page 3. 6) Maximum Ambient Operating Temperature for the AC control relays is 65°C. 7) Typical weight for the AC control relays is 2.99 oz/85g. 8) AC controlled relays contain thermal conductive epoxy. MECHANICAL SPECIFICATIONS Parameters 2500 Vrms 109 Ohm 10 pF -30 to 80°C -40 to 125 °C Valox 420 SEO Black, UL 94 V-0 2.65 oz (75g) Epoxy Free Electroless Nickel 10/1.1 20/2.2 WIRING DIAGRAM PWM DERATE INFORMATION AGENCY APPROVALS IEC 61000-4-2 Electrostatic Discharge Level 3, Criteria A IEC 61000-4-4 Electrically Fast Transients Level 3, Criteria A IEC 61000-4-5 Electrical Surges Level 3, Criteria A E116950 072312 THERMAL DERATE INFORMATION ANNEX - ENVIROMENTAL INFORMATION