PowerPlus DC • Optically Isolated MOSFET output • Ratings from 10A to 60A @ 48 VDC • AC control • Relays are easily paralleled for higher-current applications • LED Status Indicator • Optional IP20 Cover • UL Recognized, CE and RoHS Compliant PRODUCT SELECTION Control Voltage 10A 20A DC60A10 90-140 VAC DC60A20 40A DC60A40 60A DC60A60 AVAILABLE OPTIONS Control Voltage A: 90-140 VAC Series DC Cover Blank: Not Included C: Included 100 A Operating Voltage 60: 7-48 VDC 40 C Thermal Pad Blank: Not Included H: Included H Rated Load Current 10: 10 Amps 20: 20 Amps (Not valid with 400A suffix) 40: 40 Amps (Not valid with 400x suffixes) 60: 60 Amps (Not valid with 200A, 400x suffixes) OUTPUT SPECIFICATIONS (1) Description Operating Voltage [Vdc] (2) Blocking Voltage Rated Load Current [Adc] (3) Minimum Load Current [mA] (4) Maximum Surge Current [Adc] (10ms) Maximum On-State Voltage Drop @ Rated Current [Vdc] Maximum Off-State Leakage Current @ Rated Voltage [mA] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum On-State Resistance @ Rated Current [RDS-ON][mOhms] 10A 1-48 VDC 60 10 2.5 78 0.33 0.1 2.1 33.4 20A 1-48 VDC 60 20 2.5 108 0.35 0.1 1.2 17.6 40A 1-48 VDC 60 40 2.5 163 0.62 0.1 1.1 15.6 60A 7-48 VDC 60 60 2.5 200 0.62 0.1 0.8 10.4 INPUT SPECIFICATIONS (1) Description DCxxxAxx Control Voltage Range Minimum Input Current @ min Control Voltage [mA] Maximum Input Current @ max Control Voltage [mA] Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 90-140 VAC 11 13 Current Regulated 10 10 Description Parameters GENERAL SPECIFICATIONS Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (5) Ambient Storage Temperature Range Housing Material Weight (typical) (6) Encapsulation (7) Terminal Finish Recommended Terminal Screw Torque (6-32) [in lbs/Nm] Recommended Terminal Screw Torque (8-32) [in lbs/Nm] GENERAL NOTES 1) All parameters at 40°C and per section unless otherwise specified. 2) Maximum voltage is 60VDC 3) Heat sinking required, see derating curves. 4) Low current loads and high ambient temperature can affect turn-on time. 5) Maximum Ambient Operating Temperature for the AC control relays is 65°C 6) Typical weight for the AC control realys is 2.99 oz/85g. 7) AC controlled relays contain thermal conductive epoxy. MECHANICAL SPECIFICATIONS 2500 Vrms 109 Ohm 10 pF -30 to 80°C -40 to 125 °C Valox 420 SEO Black, UL 94 V-0 2.65 oz (75g) Epoxy Free Electroless Nickel 10/1.1 20/2.2 WIRING DIAGRAM AGENCY APPROVALS IEC 61000-4-2 Electrostatic Discharge Level 3, Criteria A IEC 61000-4-4 Electrically Fast Transients Level 3, Criteria A IEC 61000-4-5 Electrical Surges Level 3, Criteria A E116950 072312 THERMAL DERATE INFORMATION ANNEX - ENVIROMENTAL INFORMATION