Product family datasheet Low-voltage halogen lamps, road traffic Areas of application _ Road traffic signalling systems __ Product benefits _ Low-voltage halogen lamps, therefore particularly high luminous flux _ Almost point-like light source for optimum focusing _ Virtually constant luminous flux throughout the life of the lamp _ Extremely long life compared to conventional lamps June 13, 2016, 16:13:12 Low-voltage halogen lamps, road traffic © 2016, OSRAM GmbH. All rights reserved. Page 1 of 4 Product family datasheet Product line drawing Product line drawing Product line drawing __ June 13, 2016, 16:13:12 Low-voltage halogen lamps, road traffic © 2016, OSRAM GmbH. All rights reserved. Page 2 of 4 Product family datasheet Technical data Electrical data Photomet rical data Dimensions & weight Lifespan Capabilities Product description Nominal wattage Nominal voltage Test voltage Nominal luminous flux Diameter Overall length Light center length (LCL) Nominal lamp life time Burning position SIG 62165 1) 50.00 W 10.0 V 10 V 820 lm 11.5 mm 50.0 mm 26.0 mm 3) 2000 h p90 4) SIG 64016 50.00 W 12.0 V 12 V 900 lm 12.0 mm 44.0 mm 30.0 mm 3) 4000 h p90 4) 5) 2000 h p90 4) SIG 64014 2) SIG 64015 SIG 64012/1 50.00 W 10.0 V 10 V 950 lm 11.5 mm 42.0 mm 18.0 mm 50.00 W 10.0 V 10 V 750 lm 11.5 mm 42.0 mm 18.0 mm 5) 8000 h p90 4) 31.0 mm 3) 2000 h p90 4) 20.00 W 12.0 V 320 lm 9 mm 19.5 mm Country specific categorizations __ Product description SIG 62165 1) SIG 64016 SIG 64014 Order reference PA62165 CL 50W SIG 64016 CL 50 2) SIG 64014 CL 50 SIG 64015 SIG 64015 CL 50 SIG 64012/1 64012/1 CL 20W 1) Available on request 2) Particularly suitable for use in fiber-optic traffic signals 3) Distance from the coil to the top of base 4) Only the permissible burning position may be used otherwise the lamp will fail prematurely 5) Distance from the coil to the lug of base June 13, 2016, 16:13:12 Low-voltage halogen lamps, road traffic © 2016, OSRAM GmbH. All rights reserved. Page 3 of 4 Product family datasheet Operating instructions All halogen signal lamps operate at high temperature and pressure. They may therefore only be operated in signal equipment/luminaires specially designed for the purpose. Make sure that the lamps are protected against moisture during operation and in particular during relamping. When installing a new lamp, handle it by its protective cardboard sleeve. Application advice For more detailed application information and graphics please see product datasheet. Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. __ June 13, 2016, 16:13:12 Low-voltage halogen lamps, road traffic © 2016, OSRAM GmbH. All rights reserved. Page 4 of 4