Illuminated Switches Ultra-Miniature Fully Illuminated Toggle Switches (4.0) Dia .157 (1.7) Dia .067 (0.4) Dia Typ .016 28° (1.6) .063 (7.0) .276 Slot (4.5) .177 G12JPC (3.8) .150 G Series 1 2 4 5 3 6 (2.54) Typ .100 (2.6) .102 Straight PC (2.54) .100 (7.0) .276 (1.7) Dia .067 (0.4) Dia Typ .016 (5.08) .200 (7.8) .307 Right Angle PC 3 (5.08) .200 (1.6) .063 (10.22) .402 28° (3.8) .150 2 6 1 G12 G13 Toggle Position Connected Terminals Down Up Center 2 1 2 2 NONE OFF ON ON 2-3 2-3 NONE OPEN (5.08) .200 3 6 (2.54) .100 (7.4) .292 4 1 5 2 6 3 (0.6) Dia Typ .024 (0.4) Dia Typ .016 (2.54) .100 (2.54) Typ .100 (5.08) .200 (4.5) .177 5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models. Throw & Schematics CLEAR TOGGLE CUTAWAY 2-1 2-1 2 (COM) (5) (6) (4) Red (5) (6) Green 1 3 Single Color Bicolor 28° (1.7) Dia .067 (3.8) .150 (4.0) Dia .157 General Specifications: 3 4 5 ELECTRICAL CAPACITY (Resistive Load) » Logic Level: 0.4VA max.@28V AC/DC max. (Applicable Range 0.1mA~0.1A@20mV~28V) 4 POLES: SPDT P H V CIRCUITS: ON-NONE-ON (Combines with single color 5 or bicolor LEDs) All specifications are restricted to QA test criteria. DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU 4 5 Note: Terminal numbers are not actually on the switch. LED circuit is isolated and requires an external power source. 3 ON-OFF-ON (Combines with bicolor LED only) 3 ACTUATOR: Clear Actuator J 1 2 (0.5) Typ .020 (2.54) Typ .100 G 1 (0.6) Dia Typ .024 (2.54) .100 (7.0) .276 How to order: 1 6 Down Slot Slot ON ON 3 5 (0.4) .016 (1.0) .039 (5.08) .200 (12.76) .502 (1.6) .063 (3.8) .150 (5.3) .209 Vertical PC SPDT 2 4 4 (4.0) Dia .157 Slot Model (2.54) Typ .100 1 (2.6) .102 (0.4) Dia Typ .016 (2.54) .100 Center 5 (0.4) Dia Typ .016 (2.54) Typ .100 (0.5) .020 (2.54) .100 28° Up 3 5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models. (1.7) Dia .067 Pole & Throw 6 (2.54) Typ .100 (0.4) .016 (4.0) Dia .157 (2.6) .102 POLE & CIRCUITS 2 (0.6) Dia Typ .024 (2.54) .100 (4.9) .193 G12JVCF 1 5 5 & 6 are LED terminals; 4 is a support pin on single color models & an LED terminal on bicolor models. Slot G12JHD 4 C D F CF PC TERMINALS: Straight Right Angle Vertical LEDS: Red (Single Color, ON-NONE-ON only) Amber (Single Color, ON-NONE-ON only) Green (Single Color, ON-NONE-ON only) Red/Green (Bicolor, ON-NONE-ON & ONOFF-ON) LED COLORS & SPECIFICATIONS Colors C Red D Amber F Green CF Red/Green Forward Peak Current IFM 25mA 25mA 25mA 25mA/25mA Continuous Forward Current IF 20mA 20mA 20mA 20mA/20mA Forward Voltage VF 2.0V 2.1V 2.1V 2.0V/2.1V Reverse Peak Voltage VRM 4V 4V 4V 4V/4V 0.33mA/°C 0.33mA/°C 0.33mA/°C 0.33mA/°C / 0.33mA/°C Current Reduction Rate Above 25°C ¨IF Ambient Temperature Range [email protected] -25°C ~ +55°C OTHER RATINGS: » Contact Resistance: 80mȍ max. » Insulation Resistance: 500Mȍ min.@500VDC » Mechanical Life: 100,000 operations min. » Electrical Life: 100,000 operations min. 10,000 operations min. @ 0.1A @ 28V AC/DC » Norminal Operating Force: 1.30N » Angle of Throw: 28° MATERIALS » Movable & Stationary Contacts: Phosphor bronze with gold plating » Power & Lamp Terminals: Phosphor bronze with gold plating ENVIRONMENTAL DATA » Operating Temperature: -25°C through +55°C PCB PROCESSING » Soldering: Wave soldering recommended. Manual Soldering 4 sec. max. @ 390°C max. www.greatecs.com Illuminated Switches Subminiature Fully Illuminated Toggle Switches 1.9 Dia 6.0 Dia B Series 0.6 Dia Typ 5.08 26° 1 4 2 5 3 6 8.8 4 1 5 2 6 3 2.54 Typ Slot 3.5 8.8 B12JJPC 2.54 Typ 0.8 6.3 13.1 0.8 Dia Typ 3.1 5.08 Straight PC Terminal 4 is a support pin on single color models. 26° 3 6.0 Dia 2 2.54 Typ 1 8.8 3.1 6 5 4 1 2 3 4 5 6 2.54 1.9 Dia 5.08 Slot 0.4 0.6 Typ 0.5 2.54 0.8 Dia Typ 2.7 5.08 0.6 Dia Typ 16.42 6.3 8.8 B13JJHCF Right Angle PC 5.08 2.54 Typ Terminal 4 is a support pin on single color models. 1.9 Dia 5.08 26° 6.0 Dia 3.1 1 4 2 5 3 6 8.8 4 1 5 2 6 3 2.54 Typ 5.08 Slot 0.6 Typ 0.8 Dia Typ 2.7 5.08 POLE & CIRCUITS Center Connected Terminals Down Up Center CLEAR TOGGLE CLEAR BUSHING Throw & Schematics CUTAWAY Down Note: Terminal numbers are not actually on the switch. LED circuit is isolated and requires an external power source. Model Slot Slot 5.08 Terminal 4 is a support pin on single color models. Toggle Position Up Pole & Throw 0.6 Dia Typ 2.54 Typ 18.96 6.3 8.8 Vertical PC 5.08 26° 1.9 Dia 6.3 SPDT B12 B13 ON ON NONE OFF ON ON 2-1 2-1 NONE OPEN 2-3 2-3 2 (COM) (5) (6) (4) Red (5) (6) Green 1 3 Single Color How to order: 1 2 1 2 2 3 4 5 ELECTRICAL CAPACITY (Resistive Load) » Logic Level: 0.4VA max.@28V AC/DC max. (Applicable Range 0.1mA~0.1A@20mV~28V) 4 POLES: SPDT P H V CIRCUITS: ON-NONE-ON (Combines with single color 5 or bicolor LEDs) 3 ON-OFF-ON (Combines with bicolor LED only) 3 ACTUATOR & BUSHING: Clear Actuator & Clear Bushing JJ 3.5 General Specifications: B 1 Bicolor Illuminated Switches B13JJVCF 0.5 Typ 0.4 C D F CF PC TERMINALS: Straight Right Angle Vertical LEDS: Red (Single Color, ON-NONE-ON only) Amber (Single Color, ON-NONE-ON only) Green (Single Color, ON-NONE-ON only) Red/Green (Bicolor, ON-NONE-ON & ONOFF-ON) LED COLORS & SPECIFICATIONS Colors C Red D Amber F Green CF Red/Green Forward Peak Current IFM 30mA 30mA 20mA 30mA/20mA Continuous Forward Current IF 20mA 20mA 10mA 20mA/10mA Forward Voltage VF 1.9V 1.9V 3.4V 1.9V/3.4V Reverse Peak Voltage VRM 5V 5V 5V 5V/5V 0.43mA/°C 0.43mA/°C 0.28mA/°C 0.43mA/°C / 0.28mA/°C Current Reduction Rate Above 25°C ¨IF Ambient Temperature Range [email protected] -25°C ~ +55°C OTHER RATINGS: » Contact Resistance: 50mȍ max. » Insulation Resistance: 500Mȍ min.@500VDC » Mechanical Life: 100,000 operations min. » Electrical Life: 50,000 operations min. » Norminal Operating Force: 1.18N » Contact Timing: Nonshorting (break-before-make) » Angle of Throw: 26° MATERIALS » Movable Contacts: Phosphor bronze with gold plating » Stationary Contacts: Brass with tin plating » Terminals: Brass with gold plating ENVIRONMENTAL DATA » Operating Temperature: -25°C through +55°C PCB PROCESSING » Soldering: Wave soldering recommended. Manual Soldering 4 sec. max. @ 390°C max. www.greatecs.com J01 Illuminated Switches Fully Illuminated Toggle Switches TL Series Keyway M12 P1 1.1 x 2.0 Typ 3.5 1.17 Typ 0.6 Typ 2b 1b I v L( ) I 4.7 Typ 13.5 25 0.8 Typ L ( ) vI 2a 2.5 6.0 Dia 4.5 5.4 18.0 Sq TL22DNKW016G 1a 0.5 Typ 2.0 Typ 21.0 10.0 17.5 5.0 Typ 17.5mm Toggle Keyway M12 P1 1.1 x 2.0 Typ 3.5 1.17 Typ 0.6 Typ 2b 1b I v L( ) I 4.7 Typ 13.5 25 0.8 Typ L ( ) vI 2a 2.5 6.0 5.4 18.0 Sq TL22SCKG015C 1a 0.5 Typ 11.0 2.0 Typ 21.0 10.0 5.0 Typ 11.0mm Toggle POLES & CIRCUITS Toggle Position Down Pole Model DP TL22 Center Connected Terminals Up Down Keyway Throw & Schematics Center Up OPEN 1-1a 2-2a Keyway ON NONE 1-1b 2-2b ON Illuminated Switches TOGGLES Note: Terminal numbers are not actually on the switch. Lamp circuit is isolated and requires an external power sorce. 1 DPDT TERMINALS 1a 2 1b 2a 2b OPTIONAL HARDWARE (+) (-) CUTAWAY 2.0 11.0 17.5 3.0 3.5 5.4 12.1 Dia 2.0 Typ 1.17 Exopy Seal 17.5 Dia 1.1 Typ 5.0 Solder Lug Thk = 0.8 Typ Turret LED Thk = 0.6 1.5 D 17.5mm S 11.0mm 01 Solder Lug Terminals Combines with silver contacts only Combines with gold contacts only The 1.1x2.0mm oblong hole accommodates one solid 18-gauge wire or 2 solid or stranded20-gauge wires AT401P O-ring Use for Panel Seal Natural Rubber How to order: 1 2 General Specifications: 3 4 5 6 7 ELECTRICAL CAPACITY (Resistive Load) » Power Level: 6A@125VAC or 3A@250VAC or 6A@12VDC for silver; » Logic Level: 0.4VA max.@28VAC/DC max. for gold TL 1 2 POLE: DPDT G01 C D F For Super Bright: No Color For Bright: Red Amber Green 5 K HOUSING: Black 6 W01 TERMINAL/CONTACT/RATING: Solder Lug Silver 6A@125 VAC 6B 6F 6G N 2 2 CIRCUIT: ON-NONE-ON 3 D TOGGLE LENGTH: 17.5mm (combines with S silver contacts only) 11.0mm (combines with gold contacts only) 4 TOGGLE COLOR: Solder Lug Gold 0.4VA@28 AC/DC (for 11.0mm Toggle only) 7 5C 5D 5F (for 17.5mm Toggle only) LED COLOR: For Super Bright: White Green Blue For Bright: Red Amber Green LED COLORS & SPECIFICATIONS (LED not available separately) Colored Toggle Bright LED Colors Clear Toggle Super Bright LED 5C Red 5D Amber 5F Green 6B White 6F Green 6G Blue IFM 30mA 30mA 50mA 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA 20mA 20mA 20mA Forward Voltage VF 2.0V 2.1V 2.27V 3.6V 3.3V 3.4V 4V 4V 4V 5V 5V 5V 0.50mA/°C 0.50mA/°C Forward Peak Current Reverse Peak Voltage VRM Current Reduction Rate Above 25°C ¨IF Ambient Temperature Range J02 (COM) [email protected] 0.32mA/°C 0.40mA/°C OTHER RATINGS: » Contact Resistance: 10mȍ max. for silver; 20mȍ max. for gold; » Insulation Resistance: 1,000Mȍ min.@500VDC » Mechanical Life: 50,000 operations min. » Electrical Life: 25,000 operations min. for silver; 50,000 operations min. for gold » Norminal Operating Force: 1.9N for 17.5mm toggle; 2.5N for 11.0mm toggle » Angle of Throw: 25° MATERIALS » Mov. Contacts: Silver alloy or copper w. gold plating » Stationary Contacts: Silver plus copper with silver plating or copper with gold plating » Lamp Contacts: Beryllium copper with silver plating » Power Terminals: Copper with silver or gold plating » Lamp Terminals: Brass with silver plating ENVIRONMENTAL DATA » Operating Temperature: -10°C through +55°C SOLDERING » 3 sec. max. @ 350°C max. for manual soldering -10°C ~ +55°C www.greatecs.com Illuminated Switches Illuminated Switches with LED Tipped Actuator 1/4-40 Thd Keyway 4.8 M21 Series 1/4-40 Thd 0.8 Typ 4.8 0.8 Typ 20° 20° 4.7 Typ 4.7 Typ Keyway 6.35 0.9 0.9 6.35 8.0 14.7 2.5 Dia 14.7 20.3 6 3 5 2 4 1 8.0 6.35 20.3 9 6 3 8 5 2 7 4 1 5.0 Dia 12.7 2.5 Dia 13.0 5.0 Dia 13.0 17.5 M2112TCFW01 SP Toggle / Solder Lug Keyway 1.17 Typ 2.0 Typ 1.17 Typ M2122TCFW01 4.8 2.0 Typ DP Toggle / Solder Lug 2.4 Dia Typ 2.5 Dia 12.0 4.8 Typ 0.6 12.7 4.8 6.2 Dia 0.8 Typ 5.0 Dia 23.8 4.3 20° 4.7 Typ 29.5 2.9 4 1 13.0 2.5 Dia 4.7 Typ 5.1 13.0 0.4 1.1 14.7 7.6 16.4 1.27 Typ 6.9 3.81 9.3 SP Toggle / Right Angle PC M2112NCFW01 3.5 6.35 1.17 Typ 2.0 Typ 4.8 9.8 20.3 12.7 SP Rocker / Solder Lug 0.6 Direction of Actuation 4.5 12.0 0.8 Typ 4.8 17.8 12.0 2.4 Dia Typ 6.35 3 2 0.8 Typ 1.4 M2112TCFG30 6 5 6 3.2 Typ 3 0.8 Typ 20° 8 5 2 7 4 1 4.7 Typ 29.5 20° 13.0 4.7 Typ 2.5 Dia 6.35 3.5 6.9 9.8 3 5 2 4 1 1.17 Typ 13.0 1.17 Typ 4.8 20.3 4.8 Typ 20.3 9.8 9.3 6 15.8 0.5 Typ 6.35 3.5 2.0 Typ 1.17 Typ M2122NCFW01 10.1 9.0 9 23.8 2.5 Dia 12.7 17.5 M2112NCFW13 DP Rocker / Solder Lug SP Rocker / Straight PC / Bracket 9.3 4.5 Illuminated Switches 4.8 0.5 0.8 Typ 0.8 Typ 20° 20° 18.0 4.7 Typ 2.0 3.2 6 3 5 2 4 1 4.7 Typ 3.2 Typ 0.5 Typ 3.5 11.5 13.7 2.0 6.35 7.1 1.17 Typ 26.5 2.0 Typ 9.0 12.7 M2112JCFW01 M2112JCFW13 How to order: 2 1 2 3 4 5 6 POLES: SPDT DPDT (Available only w/ Toggles & Rockers w/ 5 W G Terminals 01, 02 & 03) 2 2 3 3 L T R N P J 4 C E F CF J16 CIRCUITS: ON-NONE-ON ON-OFF-ON LED CIRCUITS & ACTUATOR TYPES: Toggle: Isolated Synchronous Rocker: Isolated Synchronous Paddle: Isolated Synchronous LED COLORS: Single Color: Red Yellow Green Bicilor: Red/Green [email protected] 2 1 13.0 1.17 Typ 1.17 Typ 4.8 SP Paddle / Straight PC / Bracket 12.7 General Specifications: M21 1 5 4 6.35 20.2 11.5 SP Paddle / Solder Lug / Snap-in 1 20.1 3 5.0 4.8 12.2 9.0 6 3.2 13.0 2.8 5.0 15.8 6 01 02 03 13 - 7 CONTACT MATERIALS & RATINGS: Silver; Rated 6A@125VAC Gold; Rated 0.4VA max.@28VAC/ DC max. TERMINALS: Solder Lug with Threaded Bushing Quick Connect with Threaded Bushing Straight PC with Threaded Bushing Straight PC with Bracket Mount (Combines with Toggle/Paddle only) 30 Right Angle PC with Smooth Bushing (Combines with Toggle/ only; Available with gold contacts only) 7 A B C E F G H OPTIONAL BEZEL & COLORS FOR SNAP-IN FRAME WITH PADDLE: Black White Red Yellow Green Blue Gray ELECTRICAL CAPACITY (Resistive Load) » Power Level (Code W): 6A@125VAC or 3A@250VAC or 3A@30VDC » Logic Level (Code G): 0.4VA max.@28V AC/DC max. OTHER RATINGS: » Contact Resistance: 10mȍ max. f. silver; 20mȍ max. f. gold; » Insulation Resistance: 1,000Mȍ min.@500VDC » Mechanical Life: 50,000 operations min. » Electrical Life: 25,000 operations min. » Norminal Operating Force: On-to-On Position: 3.19N for Toggles & Paddles SP 4.41N for Toggles & Paddles DP 6.37N for Rockers SP 13.73N for Rockers DP Off-to-On Position: 3.92N for Toggles & Paddles SP 7.06N for Toggles & Paddles DP 9.80N for Rockers SP 17.65N for Rockers DP » Angle of Throw: 20° MATERIALS » Movable Contacts: Silver alloy / silver alloy with gold plating » Stationary Contacts: Silver with silver plating / copper or brass with gold plating » Lamp Contacts: Phosphor bronze » Switch Terminals: Copper with silver or gold plating » Lamp Terminals: Brass with silver or gold plating ENVIRONMENTAL DATA » Operating Temperature: -10°C through +55°C for toggles & rockers; -25°C through +70°C for paddles PCB PROCESSING » Soldering: Manual Soldering 4 sec. max. @ 410°C max.; » For On-On Circuit: Soldering 5 sec. max. @ 270°C max. www.greatecs.com Illuminated Switches M21 Series Illuminated Switches with LED Tipped Actuator POLES & CIRCUITS & LED ILLUMINATION Schematics Toggle Position & Terminal Numbers Center Up ON 2-3 NONE NONE ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals ON 4-6 NONE NONE ON 4-6 Synchronous Single Color LED Connected LED Terminals ON 4-6 NONE NONE OFF OPEN Synchronous Bicolor LED Connected LED Terminals Red 5-6 NONE NONE Green 5-4 ON 2-3 OFF OPEN ON 2-1 Isolated LEDs (see schematics) Connected LED Terminals ON 4-6 ON 4-6 ON 4-6 Synchronous Single Color LED Connected LED Terminals ON 4-6 OFF OPEN ON 4-6 Synchronous Bicolor LED Connected LED Terminals Red 5-6 OFF OPEN Green 5-4 ON 2-3 5-6 NONE NONE ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals ON 7-9 NONE NONE ON 7-9 Synchronous Single Color LED Connected LED Terminals ON 7-9 NONE NONE OFF OPEN Synchronous Bicolor LED Connected LED Terminals Red 8-9 NONE NONE Green 8-7 ON 2-3 5-6 OFF OPEN ON 2-1 5-4 Isolated LEDs (see schematics) Connected LED Terminals ON 7-9 ON 7-9 ON 7-9 Synchronous Single Color LED Connected LED Terminals ON 7-9 OFF OPEN ON 7-9 Synchronous Bicolor LED Connected LED Terminals Red 8-9 OFF OPEN Green 8-7 Notes: Terminal numbers are not actually on the switch. LEDs require an external power source. Keyway Model Pole & Throw M2112 SPDT LED Circuit Connected Power Terminals M2113 SPDT LED Circuit Connected Power Terminals M2122 DPDT LED Circuit Connected Power Terminals M2123 DPDT LED Circuit Connected Power Terminals Isolated Single Color LED 2 (COM) L(+) 1 Isolated Bicolor LED 3 L(-) 4 6 2 (COM) Red Green 1 Synchronous Single Color LED 3 (+) Red 6 ( ) Green 4 2 (COM) L(+) 1 3 Synchronous Bicolor LED L(-) 4 6 2 (COM) Green Red 1 Isolated Single Color LED 3 2 (COM) 4 5 COM (+) 6 5 L(+) 1 3 Isolated Bicolor LED 4 6 L(-) 7 9 5 2 (COM) Red Green 1 Synchronous Single Color LED 3 6 4 2 (COM) (+) Red 9 ( ) Green 7 5 L(+) 1 Synchronous Bicolor LED 3 4 2 (COM) 6 L(-) 7 5 9 Illuminated Switches Down Green Red 1 3 6 4 7 8 COM (+) 9 LED COLORS & SPECIFICATIONS Single Element LED LED factory assembled Not Available Separately Bicolor is white in OFF state For Toggles & Rockers Single Color For Paddles Bicolor Single Color Bicolor Units Color C Red E Yellow F Green CF Red/Green C Red E Yellow F Green CF Red/Green Forward Peak Current IFM 25 30 30 25 10 30 30 30/25 mA Continuous Forward Current IF 20 20 20 20 8 24 24 20/20 mA Forward Voltage VF 2.1 2.1 2.1 2.1 1.9 2.0 2.1 2.0/2.2 V Reverse Peak Voltage VRM Current Reduction Rate Above 25°C IF Ambient Temperature Range [email protected] 4 4 4 - 5 5 5 - V 0.33 0.40 0.40 0.27/0.33 0.13 0.40 0.40 0.43/0.38 mA/°C -10°C ~ +55°C -25°C ~ +70°C www.greatecs.com J17 Illuminated Switches M21 Series Illuminated Switches with LED Tipped Actuator TOGGLES: LED CIRCUIT & MOUNTING TYPE COMBINATIONS L Toggle with isolated LED Circuit T Toggle with Synchronous LED Circuit 20° 20° 5.0 Dia 14.7 Finish: Brushed aluminum Standard Hardware: 2 AT513H Hex Nuts, 1 AT507H Locking Ring, 1 AT509 Lockwasher Max. Panel Thickness with Standard Hardware 2.6mm 5.0 Dia 14.7 Max. Panel Thickness without Locking Ring 3.4mm 5.6 6.2 Dia 1/4-40 Thd 6.5 6.5 Dia Smooth Bushing combines with Terminal code 30 Threaded Bushing combines with Terminal codes 01, 02 & 03 6.5 Dia 0.6 2.2 Dia ROCKERS: LED CIRCUIT & MOUNTING TYPE COMBINATIONS R Rocker with isolated LED Circuit N Rocker with Synchronous LED Circuit 16.8 13.5 20° 20° 12.0 12.0 9.8 Material: Polyamide Finish: Matte Color: Black Max. Panel Thickness 3.2mm 16.8 13.5 17.8 9.8 23.8 3.5 3.5 0.6 Bracket combines with Terminal codes 13 Flat Frame combines with Terminal codes 01, 02 & 03 2.6 Dia Typ 10.1 PADDLES: LED CIRCUIT & MOUNTING TYPE COMBINATIONS P Paddle with isolated LED Circuit J Paddle with Synchronous LED Circuit 20° 4.5 13.7 20° Max. Panel Thickness without Bezel: 1 ~ 3.2mm; Max. Panel Thickness with Bezel: 1 ~ 2.5 mm 3.2 5.9 R 0.5 3.2 4.5 2.8 12.7 15.9 3.5 Illuminated Switches Flat Frame combines with Terminal codes 01, 02 & 03 Bracket combines with Terminal codes 13 13.1 PADDLES: LED CIRCUIT & MOUNTING TYPE COMBINATIONS 01 Solder Lug with Turret LED Terminal 6.35 4.8 2.0 1.17 1.1 4.8 Thk = 0.8 Typ 02 Quick Connect AT2107 Bezel for snap-in Panel Frame Wiring: Solder lug terminals have a 1.1x2.0mm oval hole which accommodates one solid 18-gauge wire or two solid or stranded 20-gauge wires. Epoxy Seal 6.35 4.8 Material: Polyamide Finish: Matte 1.57 Typ 4.8 Thk = 0.8 Typ 03 Straight PC with Turret LED Terminal 11.8 4.8 6.35 Epoxy Seal 4.8 Single Pole: 1.17 Typ 4.8 Typ 3 6 2 5 1 4 4.8 Thk = 0.8 Typ 4.7 Typ Double Pole: 3 6 9 2 5 8 1 4 7 2.4 Typ 3 6 2 5 21.5 4.7 Typ 6 5 4 3 2 1 3.81 7.9 Typ 1 4 16.4 4.7 Typ 1.8 Dia Typ CL 12.0 1.8 Dia Typ 30 Right Angle PC 1.6 Typ 2.2 4.7 Typ 15.6 1.8 Dia Typ 13 Straight PC with Bracket & Turret LED Terminal 12.4 OPTIONAL BEZEL & COLORS 2.0 4.0 5.9 R 20.1 7.1 Material: Polyamide Finish: Matte Color: Black Epoxy Seal Max. Panel Thickness 3.2mm 1.8 Dia Typ 1.5 Dia Typ A B C E F G H Black White Red Yellow Green Blue Gray 15.9 13.1 2.54 Typ STANDARD MOUNTING HARDWARE AT513H Hexagon Nuts (2 per switch) Material: Brass with nickel plating AT507H Locking Ring (1 per switch) Material: Steel with chromate over zinc AT509 Lockwasher (1 per switch) Material: Steel with chromate over zinc 6.35 Dia 1/4-40 Thd 8.0 12.0 Dia 2.0 9.0 6.4 Dia 10.2 Dia 1.7 1.5 0.8 0.5 5.5 J18 [email protected] www.greatecs.com