100 kV X-RAY MICROFOCUS X-RAY SOURCE SOURCE L10321 TLSOF0185 FEATURES APPLICATIONS ●Wide X-ray beam angle: 118 ° ●Short FOD (Focus to Object Distance): 7.3 mm ●Non-destructive inspection ●X-ray CT ●Focal spot size: 5 µm (at 4 W) [Applicable objects] X-ray image with higher magnification ratio The focal spot of 5 µm of the sealed type X-ray tube offers sharp and clear X-ray images even at a high magnification. ●No high voltage cable connection required High voltage power supply is integrated. •Electronic component •Printed circuit board •Plastic component •Metal component SPECIFICATIONS GENERAL Parameter X-ray tube voltage setting range X-ray tube current setting range X-ray tube voltage operational range 1 X-ray tube current operational range 1 Maximum output X-ray focal spot size (Nominal value) 2 X-ray output window material / Thickness X-ray beam angle 3 Focus to object distance (FOD) Target material Weight 4 Communication method Description / Value 0 to 100 0 to 200 40 to 100 10 to 200 20 5 to 30 Beryllium/0.5 Approx. 118 / 105 Approx. 7.3 Tungsten Approx. 9.5 Interface: RS-232C (9-pin D-sub connector) Unit kV µA kV µA W µm mm degree mm — kg — Description / Value +24 (+2.4, -0) Less than 120 Continuous rating +10 to +40 0 to +50 20 to 85 (No condensation) Unit V W — °C °C % Description EN 50581 Category 9 Emission limits: CISPR 11 Group 1 Class A IEC/EN 61326-1 Immunity requirements: Table 2 Unit — Description PC / AT compatible Windows® XP, 7 RS-232C interface Unit — — — RATINGS Parameter Input voltage (DC) Power consumption Rated output Operating ambient temperature Storage ambient temperature Operating and storage humidity REGULATION AND STANDARD Parameter RoHS directive EMC — CONTROL SOFTWARE 5 Parameter Applicable PC Applicable OS Interface NOTE: 1See the graph of the X-ray tube Voltage / Current operation range. 2This focal spot size changes depending on the output. 3Reference value: With 50 % of maximum X-ray emission. 4This weight includes the accessories of approx. 0.25 kg. 5The control software is provided as a sample software for the purpose of MFX operation. The performance of the software is not guaranteed. ! PRECAUTIONS TO USE · This microfocus X-ray source generates X-rays harmful to the human body. Use sufficient caution when handling the equipment to avoid direct or inadvertent exposure to X-rays. Install the X-ray source or the X-ray tube unit in an X-ray shielded cabinet or room equipped with safety interlock functions to prevent accidental exposure to X-rays. OPERATIONAL CAUTION · This microfocus X-ray source generates X-rays and must therefore be used only under the supervision of qualified personnel. · This microfocus X-ray source shall be used in compliance with health and safety regulations enforced in order to prevent health hazards problems due to ionizing radiation. X-RAY TUBE VOLTAGE / CURRENT OPERATION RANGE 250 TXPRB0027EB TUBE CURRENT (µA) 200 150 100 50 10 40 * The X-ray tube voltage guaranteed range is 40 kV to 100 kV. * Operation is not guaranteed when the tube current is below 10 µA. 50 60 70 80 90 100 TUBE VOLTAGE (kV) DIMENSIONAL OUTLINE (Unit: mm) 4 × M6 DEPTH 8 (MOUNTING SCREW HOLES) 147.0 ± 0.5 86 ± 1 X-RAY FOCAL SPOT 78 ± 1 FOD 7.3 147.0 ± 0.5 50 ° 55 100 4.5 33 X-RAY BEAM ANGLE 118° ° INTERLOCK-2 289 ± 1 147.0 ± 0.5 INTERLOCK-1 195 ± 1 COOLING FAN 23 X-RAY FOCAL SPOT 4 × M2 DEPTH 3 POWER DC 24 V RS-232C 12 PROTECTIVE EARTH TERMINAL 85 MIN. (REFERENCE)* 167 ± 1 4 × M6 DEPTH 8 (MOUNTING SCREW HOLES) 172 ± 1 4 × M6 DEPTH 8 (MOUNTING SCREW HOLES) 9.5 147.0 ± 0.5 147.0 ± 0.5 147.0 ± 0.5 , * Connection cables aren t included. TXPRA0027EA RELATED PRODUCTS X-RAY IMAGE INTENSIFIER DIGITAL CAMERA UNIT C7336-05/-52 The C7336 series consist of a high resolution, high contrast 4-inch X-ray image intensifier (X-ray I.I.) and a 2.8 megapixel CMOS image sensor. The X-ray I.I. used has a fixed field-of-view of 100 mm diameter or a 4 inches/2 inches adjustable field-of-view and an input window made of thin aluminum which is excellent in X-ray transmission and causes less scattering of X-rays. These features allow real-time detection at X-ray energy levels from about 20 keV. The captured images can be transferred to PC directly by interface of IEEE1394b. X-CUBE™ (COMPACT X-RAY CCD CAMERA) H8480, H8481, H8953 TXPRF0020 X-CUBEs are compact X-ray CCD camera designed for non-destructive inspection, which make X-ray imaging as easy as an ordinary CCD camera in handling. The H8480 and H8953 use a 2/3 type CCD coupled to large-diameter tapered FOPs which are coated with CsI. The H8481 uses a straight type FOP instead of the large FOP, achieving a high resolution of 20 Lp/mm. Left: H8480 Center: H8953 Right: H8481 FOS (Fiber optic plate coated with X-ray scintillator) The FOS is an optical device for X-ray imaging, fabricated by coating an X-ray scintillator material over a fiber optic plate consisting of more than tens of million glass fibers each a few micrometers in diameter. The FOS provides higher sensitivity and resolution than currently used sensitized paper films and also allows real-time digital radiography when directly coupled to a commercially available CCD. The fiber optic plate used in the FOS has excellent X-ray absorption characteristics, so that X-rays penetrating the X-ray scintillator and directly entering the CCD are minimized to less than 1 %. This protects the CCD from the deterioration and increased noise caused by X-ray irradiation, assuring a long service life and maintaining high image quality. Various sizes and shapes of FOS are available to meet your particular needs, including tapered FOP types. ■Structure TMCPF0072 Protection Film Scintillator : CsI(Tl) FOP (Fiber optic plate) 2D Image-Device Windows ® is a registered trademark of Microsoft Corporation in the United States and/or other countries. Other product and software names mentioned herein may be either registered trademarks or trademarks of their respective owners. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TXPR1013E02 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: [email protected] NOV. 2015 IP China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected]