Surface Mount type 4 Direction Detector Datasheet RPI-1035 Applications Dimensions (Unit : mm) • DSC(Digital still camera) • DVC(Digital video camera) • Smart phone • Fan heater • Projector Features 1) Surface Mount type 2) Optical Sensor 3) 4 Direction Detector Absolute maximum ratings (Ta = 25°C) Parameter Symbol Limits Unit Forward current IF 50 mA Reverse voltage VR 5 V Power dissipation PD 80 mW Collector-emitter voltage VCEO 30 V Emitter-collector voltage VECO 4.5 V Collector current IC 30 mA Collector dissipation PC 80 mW Operating temperature Topr 25 to 85 °C Storage temperature Tstg 30 to 85 °C Input (LED) Output (Phototransistor) www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet RPI-1035 Electrical and optical characteristics (Ta = 25°C) 1) Input characteristics Values Parameter Symbol Conditions Unit Min. Typ. Max. Forward voltage VF IF =50mA - 1.3 1.6 V Reverse current IR VR =5V - - 10 A 2) Output characteristics Values Parameter Symbol ICED Dark current Peak sensitivity wavelength Conditions VCE =10V p - Symbol Conditions Unit Min. Typ. Max. - - 0.5 A - 800 - nm 3) Transfer characteristics Values Parameter Collector current DC leakage current Collector-emitter saturation voltage Unit Min. Typ. Max. IC VCE =5V, IF =5mA 100 - - Ileak VCE =5V, IF =5mA - - 15 IF =20mA, IC =0.1mA - - 0.4 VCE(sat) mA Rise time tr VCC =5V, IF =20mA - 10 - Fall time tf RL=100 - 10 - Response time V ms 4) Infrared light emitter diode Values Parameter Symbol Cut-off frequency fC Peak light emitting wavelength P Conditions IF =50mA*1 Unit Min. Typ. Max. - 1 - MHz - 950 - nm 1Non-coherent Infrared light emitting diode used. 5) Phototransistor Values Parameter Symbol Conditions VCC=5V, IC=1mA, Unit Min. Typ. Max. Response time tr·tf RL=100W2 - 10 - ms Maximum sensitivity wavelength P - - 800 - nm 2 This product is not designed to be protected against electromagnetic wave. www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 2/4 2014.07 - Rev.B Data Sheet RPI-1035 Electrical and optical characteristic curves Fig.2 Forward Current vs. Forward Voltage FORWARD CURRENT : IF [mA] FORWARD CURRENT : IF [mA] Fig.1 Forward Current A Falloff FOWARD VOLTAGE : VF [V] AMBIENT TEMPERATURE : Ta [°C] Fig.4 Relative Output vs. Ambient Temperature RELATIVE CLLECTOR CURRENT : Ic [%] POWER DISSIPATION / COLLECTOR POWER DISSIPTION : PD/PC (mW) Fig.3 Power Dissipation / Collector Power Dissipation vs. Ambient Temperature AMBIENT TEMPERATURE : Ta [°C] AMBIENT TEMPERATURE : Ta [°C] Fig.6 DC Leakage Current vs. Fforward Current COLLECTOR CURRENT :IC [mA] DC LEAKAGE CURRENT : Ileak [mA] Fig.5 Collector Current vs. Forward Current FORWARD CURRENT : IF [mA] www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. FORWARD CURRENT : IF [mA] 3/4 2014.07 - Rev.B Data Sheet RPI-1035 Electrical and optical characteristic curves Fig.8 Dark Current vs. Ambient Temperature RESPONSE TIME: tr [ms] DARK CURRENT : ICED [nA] Fig.7 Response Time vs. Collector Current AMBIENT TEMPERATURE : Ta [°C] LOAD RESISTANCE : RL [k] Fig.9 Output Characteristics COLLECTOR CURRENT :IC [mA] Fig.10 Response Time Measurement Circuit COLLECTOR TO EMITTER VOLTAGE : VCE [V] www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 4/4 2014.07 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1102A