2SD2638 TOSHIBA Transistor Silicon NPN Triple Diffused Mesa Type 2SD2638 Horizontal Deflection Output for Color TV, Digital TV. High Speed Switching Applications. · High voltage: VCBO = 1700 V · Low saturation voltage: VCE (sat) = 5 V (max) · High speed: tf = 0.8 µs (max) Unit: mm Maximum Ratings (Tc = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 1700 V Collector-emitter voltage VCEO 750 V Emitter-base voltage VEBO 5 V DC IC 7 Pulse ICP 14 Base current IB 3.5 A Collector power dissipation PC 50 W Junction temperature Tj 150 °C Tstg -55~150 °C Collector current Storage temperature range A JEDEC ― JEITA ― TOSHIBA Equivalent Circuit 2-16E3A Weight: 5.5 g (typ.) 2. Collector 1. Base 50 W (typ.) 3. Emitter Electrical Characteristics (Tc = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 1700 V, IE = 0 ¾ ¾ 1 mA Emitter cut-off current IEBO VEB = 5 V, IC = 0 66 ¾ 200 mA V (BR) EBO IE = 400 mA, IC = 0 5 ¾ ¾ V hFE (1) VCE = 5 V, IC = 1 A 8 ¾ 25 hFE (2) VCE = 5 V, IC = 5.5 A 4.5 ¾ 7.5 Collector-emitter saturation voltage VCE (sat) IC = 5.5 A, IB = 1.2 A ¾ ¾ 5 V Base-emitter saturation voltage VBE (sat) IC = 5.5 A, IB = 1.2 A ¾ 1.0 1.5 V Forward voltage (damper diode) VF IF = 7 A ¾ 1.3 2 V Transition frequency fT VCE = 10 V, IC = 0.1 A ¾ 2 ¾ MHz VCB = 10 V, IE = 0, f = 1 MHz ¾ 125 ¾ pF ICP = 5.5 A, IB1 (end) = 1.1 A, fH = 15.75 kHz ¾ 7 9 ¾ 0.4 0.8 Emitter-base breakdown voltage DC current gain Collector output capacitance Switching time Storage time Fall time Cob tstg tf 1 ms 2001-11-27 2SD2638 IC – VCE 10 Common emitter Tc = 25°C 2 1.8 1.6 1.4 Collector current IC (A) 8 1.2 1.0 0.8 0.6 6 0.4 4 0.2 IB = 0.1 A 2 0 0 2 4 6 8 Collector-emitter voltage VCE 10 (V) hFE – IC Common emitter VCE = 5 V DC current gain hFE 300 100 30 Tc = 100°C 10 25 -25 3 1 0.01 0.03 0.1 0.3 1 Collector current 3 IC 10 30 (A) IF – VF IC – VBE 10 10 Collector current 6 4 2 Tc = 100°C 0 0 0.2 Open base (A) Instantaneous forward current IF 8 IC (A) Common emitter VCE = 5 V 0.4 0.6 -25 25 0.8 Base-emitter voltage VBE 1 8 6 4 0 0 1.2 Tc = 100°C 2 -25 25 0.4 0.8 1.2 1.6 Instantaneous forward voltage VF (V) 2 2 (V) 2001-11-27 2SD2638 VCE (sat) – IC VCE – IB 10 Common emitter Tc = -25°C Collector emitter saturation voltage VCE (sat) (V) Collector emitter voltage VCE (V) 10 8 6 4 2 3 0 0 3.5 4 4.5 IC = 5.5 A 5 5 0.8 1.2 Base current 1.6 IB 2 6 4 1 0.5 0.3 IC/IB = 2 0.1 2.4 1 Collector emitter saturation voltage VCE (sat) (V) (V) Collector emitter voltage VCE Common emitter Tc = 25°C 8 6 3.5 4.5 2 0 0 5 IC = 5.5 A 5 0.8 1.2 Base current 1.6 IB 2 Common emitter Tc = 25°C 1 1 2 IC = 5.5 A 1.2 Base current 1.6 IB 3 5 10 Collector current Collector emitter saturation voltage VCE (sat) (V) (V) Collector emitter voltage VCE 3.5 0.8 100 30 50 100 0.1 IC (A) VCE (sat) – IC 4 0.4 50 IC/IB = 2 10 6 0 0 30 0.3 (A) 8 5 100 0.5 2.4 Common emitter Tc = 100°C 4.5 50 4 VCE – IB 4 30 (A) 6 10 3 IC 8 3 0.05 0.2 0.4 10 VCE (sat) – IC 10 4 5 (A) VCE – IB 3 3 Collector current 10 4 8 3 0.05 0.2 0.4 Common emitter Tc = -25°C 2 5 8 3 6 1 4 0.5 0.3 IC/IB = 2 0.1 0.05 0.2 2.4 Common emitter Tc = 100°C 1 3 5 Collector current (A) 3 10 IC (A) 2001-11-27 2SD2638 Transient thermal impedance (junction-case) rth (j-c) (°C/W) rth (j-c) – tw 10 1 0.1 0.01 Tc = 25°C (infinite heat sink) Curves should be applied in thermal limited area. (single nonrepetitive pulse) 0.001 10 m 100 m 1m 10 m 100 m Pulse width 1 tw 10 100 (s) PC – Tc Safe Operating Area 100 100 (W) IC max (pulsed)* 10 ms* Cllector power dissipation PC 100 ms* 1 ms* (A) 10 Collector current IC IC max (continuous) 1 10 ms* DC operation Tc = 25°C 100 ms* Infinite heat sink 80 60 40 20 0 0 0.1 25 50 75 100 Case temperature Tc *: Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. 0.01 1 1000 10 Collector-emitter voltage 125 150 175 (°C) VCEO max 100 VCE 1000 (V) 4 2001-11-27 2SD2638 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 5 2001-11-27