TSSP-HA www.vishay.com Vishay Semiconductors IR Receiver Modules for Remote Control Systems FEATURES • Withstands temperatures for wave soldering on opposite side of PCB, or hand soldering • For reflector and beam-break sensor applications • 3 mm emitters • Sensors with 2.54 mm pitch • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 SUITABLE FOR SENSORS: • TSSP4... • TSSP58... DESCRIPTION The TSSP-HA is a plastic housing that provides support and optical isolation between an emitter and a sensor for reflective and beam-break sensor applications. A standard lead bending, ST1, is designed for the TSSP-HA housing, and may be ordered for both the TSSP4... and TSSP58... series sensors. SUITABLE FOR EMITTERS: • VSLB394. • TSAL4400 • TSUS4... PARTS TABLE Carrier frequency Package Dimensions (mm) Mounting Application n/a TSSP-HA Holder 20.0 W x 13.65 H x 9.0 D Leaded Presence sensors, proximity sensors MECHANICAL DIMENSIONS in millimeters 20 8.5 8.5 7.5 7.5 8.89 5.25 5.25 J-J ( 3 : 1 ) K-K ( 3 : 1 ) ( R0.4) K 11.65 1.8 J 1 K 2.54 ± 0.15 (3.3) 1.8 10.65 2 .2 3.4 - 0.05 13.65 7.62 ± 0.15 + 0.25 J 9 5.08 ± 0.15 7.62 ± 0.15 5.25 2.54 ± 0.15 (5 x) 7.62 ± 0.15 Ø 1 ± 0.1 Technical drawings according to DIN specification Proposed hole layout from component side (for reference only) Fixture adapted to Vishay emitter VSLB3940 Vishay TSSP4038ST1 or TSSP4P38ST1 (5x) 5.08 Ø1 7.62 Not indicated tolerances ± 0.2 2.54 2.54 Drawing no. 7.200-5408.01-4 Issue: 1, 13.11.14 5.08 PACKING QUANTITY • Approximately 100 pieces per bag (each bag is individually boxed) • 6 bags per carton Rev. 1.1, 19-Jan-16 1 Document Number: 82727 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000