TEFD4300F www.vishay.com Vishay Semiconductors Silicon PIN Photodiode FEATURES • Package type: leaded • Package form: T-1 • Dimensions (in mm): Ø 3 • High radiant sensitivity • Daylight blocking filter matched with 850 nm to 950 nm emitters • Fast response times • Angle of half sensitivity: ϕ = ± 20° • Package matched with IR emitter series VSLB3940, TSUS4300, and TSAL4400 DESCRIPTION TEFD4300F is a silicon PIN photodiode with high radiant sensitivity in black, T-1 plastic package with daylight blocking filter. Filter bandwitdth is matched with 850 nm to 950 nm IR emitters. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • High speed photo detector for data transmission • Optical switches • Counters and sorters • Interrupters • Encoders • Position sensors PRODUCT SUMMARY Ira (μA) ϕ (deg) λ0.5 (nm) 17 ± 20 770 to 1070 PACKAGING REMARKS PACKAGE FORM Bulk MOQ: 5000 pcs, 5000 pcs/bulk T-1 COMPONENT TEFD4300F Note • Test condition see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE TEFD4300F Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb ≤ 25 °C Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Rev. 1.2, 04-Aug-14 SYMBOL VALUE VR 60 UNIT V PV 215 mW Tj 100 °C Tamb -40 to +100 °C °C Tstg -40 to +100 t ≤ 3 s, 2 mm from case Tsd 260 °C Connected with Cu wire, 0.14 mm2 RthJA 450 K/W Document Number: 83472 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEFD4300F www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = 50 mA VF IR = 100 μA, E = 0 V(BR) VR = 10 V, E = 0 Iro 0.15 VR = 0 V, f = 1 MHz, E = 0 CD 3.3 Forward voltage Breakdown voltage Reverse dark current Diode capacitance MIN. TYP. MAX. UNIT 1 V 60 V 3 nA pF VR = 5 V, f = 1 MHz, E = 0 CD 1.2 pF Open circuit voltage Ee = 1 mW/cm2, λ = 950 nm VOC 350 mV Temperature coefficient of VO Ee = 1 mW/cm2, λ = 950 nm TKVo -2.6 mV/K mW/cm2, λ = 950 nm Short circuit current Ee = 1 Ik 15 μA Temperature coefficient of Ik Ee = 1 mW/cm2, λ = 950 nm TKIk 0.1 %/K Ee = 1 mW/cm2, λ = 950 nm, VR = 5 V Ira Reverse light current 9 17 27 μA Angle of half sensitivity ϕ ± 20 deg Wavelength of peak sensitivity λp 950 nm λ0.5 Range of spectral bandwidth 770 1070 nm Rise time VR = 10 V, RL = 1 kΩ, λ = 820 nm tr 100 ns Fall time VR = 10 V, RL = 1 kΩ, λ = 820 nm tf 100 ns BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 10-7 Ira, rel - Relative Reverse Light Current Ir0 - Reverse Dark Current (A) 10-6 VR = 10 V -8 10 10-9 10-10 -11 10 10-12 0 20 40 60 80 Fig. 1 - Reverse Dark Current vs. Ambient Temperature VR = 5 V λ = 950 nm 1.2 1.0 0.8 0.6 0 100 Tamb - Ambient Temperature (°C) Rev. 1.2, 04-Aug-14 1.4 94 8416 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature Document Number: 83472 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEFD4300F www.vishay.com Vishay Semiconductors 1.0 tp = 100 μs, VR = 5 V, λ = 950 nm 0.9 Srel - Relative Sensitivity Ira - Reverse Light Current (μA) 100 10 1 0.1 1 10 100 1000 0.6 0.5 0.4 0.3 0.2 0 - 90 10 000 - 60 - 30 0 30 60 90 Ee - Irradiance (μW/cm2) ϕ - Angular Displacement (°) Fig. 3 - Reverse Light Current vs. Irradiance Fig. 6 - Relative Radiant Intensity vs. Angular Displacement 3.5 10-6 Ir0 - Reverse Dark Current (A) f = 1 MHz, E = 0 3.0 Cp - Capacitance (pF) 0.7 0.1 0.01 2.5 2.0 1.5 1.0 0.5 0 0.01 S(λ)rel - Relative Spectral Sensitivity 0.8 0.1 1 10 100 100 °C 10-7 75 °C 10-8 50 °C 10-9 25 °C 10-10 0 °C 10-11 10-12 0 5 10 15 20 VR - Reverse Voltage (V) VR - Reverse Voltage (V) Fig. 4 - Diode Capacitance vs. Reverse Voltage Fig. 7 - Dark Current vs. Reverse Voltage 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 500 600 700 800 900 1000 1100 λ - Wavelength (nm) Fig. 5 - Relative Spectral Sensitivity vs. Wavelength Rev. 1.2, 04-Aug-14 Document Number: 83472 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEFD4300F www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 3.2 ± 0.1 C SENSITIVE AREA Ø 3 ± 0.1 AREA NOT PLANE 5.8 ± 0.3 34.4 ± 0.5 < 0.6 (2.5) 3.5 ± 0.1 4.5 ± 0.3 3.9 ± 0.15 A 2.54 nom. 1.5 ± 0.5 + 0.15 + 0.2 0.5 - 0.1 0.4 - 0.05 technical drawings according to DIN specifications Drawing-No.: 6.544-5411.01-4 Issue: 2; 28.07.14 Rev. 1.2, 04-Aug-14 Document Number: 83472 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000