TSMP58000 Datasheet

TSMP58000
www.vishay.com
Vishay Semiconductors
IR Sensor Module for Remote Control Systems
FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
data formats
• Improved shielding
disturbance
against
electrical
field
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the device
works in the range between 2.0 V and 5.5 V
19026
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL DATA
Pinning:
DESCRIPTION
1 = carrier OUT, 2 = GND, 3 = VS
The TSMP58000 is a miniaturized sensor for receiving the
modulated signal of infrared remote control systems. A PIN
diode and preamplifier are assembled on a lead frame, the
epoxy package is designed as an IR filter. The modulated
output signal, carrier out, can be used for code learning
applications.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
Carrier frequency
20 kHz to 60 kHz
TSMP58000
Package
Minicast
Pinning
1 = carrier OUT, 2 = GND, 3 = VS
Dimensions (mm)
5.0 W x 6.95 H x 4.8 D
Mounting
Leaded
Application
Code learning
BLOCK DIAGRAM
APPLICATION CIRCUIT
V
S
Transmitter TSMPxxxx
with
C1 =
TSALxxxx
4.7 µF
Circuit
3 VS
1 Carrier out
TIA
Amp
Signal shaping
OUT
GND
R1 = 100 Ω
R2 =
4.7 kΩ
+ VS
µC
VO
GND
2 GND
R1 + C1 recommended to suppress power supply
disturbances.
R2 recommended to get faster slopes and a correct
high level of the output pulses.
19746
Rev. 1.2, 09-May-14
1
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSMP58000
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
SYMBOL
VALUE
UNIT
Supply voltage (pin 3)
TEST CONDITION
VS
-0.3 to +6
V
Output voltage (pin 1)
VO
-0.3 to (VS + 0.3)
V
Output current (pin 1)
IO
5
mA
Junction temperature
Storage temperature range
Operating temperature range
t ≤ 10 s, 1 mm from case
Soldering temperature
Tj
100
°C
Tstg
-25 to +85
°C
Tamb
-25 to +85
°C
Tsd
260
°C
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability.
ELECTRICAL AND OPTICAL CHARACTERISTICS CARRIER OUT
(Tamb = 25 °C, unless otherwise specified, VS = 3 V)
PARAMETER
Supply current (pin 3)
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Ev = 0
ISD
0.55
0.7
0.9
mA
VS
2.5
5.5
V
Supply voltage
Ev = 0, test signal see fig. 1,
IR diode TSAL6200,
IF = 400 mA
Transmission distance
d
5
m
IOSL = 0.5 mA, test signal see fig. 1
VOSL
Minimum irradiance
VS = 3 V, (20 kHz to 60 kHz)
Ee min.
Maximum irradiance
test signal see fig. 1, (20 kHz to 60 kHz)
Ee max.
80
W/m2
Angle of half transmission distance
ϕ1/2
± 45
deg
fC = 20 kHz to 60 kHz,
Ee = 25 mW/m2 to 50 W/m2,
testsignal see fig. 1, BER ≤ 2%
N
carrier
pulses
input burst
input burst
input burst
length
length
length
- 1 cycle
+ 1 cycle
counts
Output voltage low (pin 1)
Directivity
Output accuracy
12
50
250
mV
25
mW/m2
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Carrier cycle
(26.3 μs in case of 38 kHz)
Optical burst
(input signal)
Delay time td
Output voltage
Fig. 1 - Testsignal
Rev. 1.2, 09-May-14
2
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSMP58000
S (λ)rel - Relative Spectral Sensitivity
www.vishay.com
Vishay Semiconductors
1.2
1.0
0.8
0.6
0.4
0.2
0
750
850
950
1150
1050
λ - Wavelength (nm)
94 8408
Fig. 2 - Relative Spectral Sensitivity vs. Wavelength
0°
10°
20°
30°
40°
1.0
0.9
50°
0.8
60°
70°
0.7
80°
0.6
19258
0.4
0.2
0
drel - Relative Transmission Distance
Fig. 3 - Horizontal Directivity
0°
10°
20°
30°
40°
1.0
0.9
50°
0.8
60°
70°
0.7
80°
0.6
19259
0.4
0.2
0
d rel - Relative Transmission Distance
Fig. 4 - Vertical Directivity
Rev. 1.2, 09-May-14
3
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSMP58000
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
5
4.8
(4)
2.8
(5.55)
6.95 ± 0.3
8.25 ± 0.3
R2
0.9
1.1
30.5 ± 0.5
(1.54)
0.85 max.
0.7 max.
2.54 nom.
2.54 nom.
0.5 max.
1.2 ± 0.2
Marking area
technical drawings
according to DIN
specifications
Not indicated to lerances ± 0.2
Drawing-No.: 6.550-5263.01-4
Issue: 12; 16.04.10
19009
Rev. 1.2, 09-May-14
R2
4
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000