2010 Catalog High-Rel Discrete Semiconductors Assembly Products Semtech Space Level Flow HR500S Axial and Surface Mount Packages W W W .SE MTE C H .C O M 2010 Catalog Semtech Space Level Flow HR500S Axial and Surface Mount Packages Table of Contents HR500S (Axial Lead Package) JANTXV quality level------------------------------------------- 4 100% Screening -------------------------------------------5 Group “A” same as Mil-PRF-19500------------------------------------------- 8 Group “B” same as Mil-PRF-19500 -------------------------------------------9 HR500S (Surface Mount Package) JANTXV quality level ------------------------------------------- 12 100% Screening------------------------------------------- 13 Group “A” same as Mil-PRF-19500 ------------------------------------------- 14 W W W .SE MTE C H .C OM -3- HR500S (Axial Lead Package) HR500S (Axial Lead Package) The platform device for this flow would be of JANTXV quality level Test Operation MIL STD Reference Document 1 Fab Traceability 2 Internal Visual 750/2074 3 Visual & Mechanical 750/2071 4 Electrical Sort 5 Scope Display Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) Lot form prior to assembly from a single wafer fabrication lot The devices shall be examined for: Workmanship Materials, Design and Construction Electrical sort to Semtech internal specifications 750/4023 BV > xxx, trace to be as specified W W W .SE MTE C H .C OM Page 1 -4- HR500S (Axial Lead Package) HR500S (Axial Lead Package) 100% SCREENING Test 1 2 Operation High Temperature Storage Thermal Cycling MIL STD Reference Document Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) 750/1031 TA = 175 ºC, Time = 24 Hours 750/1051 Condition C, Temp. extremes : TA(low) = -55ºC TA (high) = 175ºC Time: Extreme = 15min Number of cycles = 20 3 Thermal Impedance 4 Thermal Normalization 750/3101 Thermal distribution determined and “flyers” removed 750/4016 5 Electrical GNG 750/4011 750/4021 6 7 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA Ir distribution determined and “flyers” removed Serialize Maintain Individual Identity through HTRB and Burn-in. Maintaining serialization through packaging is an available option Pre HTRB Elect 750/4011 750/4021 9 IR <xμA dc, VR = xxx Vdc Ir Normalization 750/4016 8 ZθJX = As determined by Group E analysis High Temperature Reverse Bias 750/1038 IR < Statistical limit VR = xxx Vdc VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = yy Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA Condition A, Operated for 48 Hours min. TA = 150ºC, VR = 80% of rated VR W W W .SE MTE C H .C OM Page 2 -5- HR500S (Axial Lead Package) HR500S (Axial Lead Package) 100% SCREENING, continued Test Operation MIL STD Reference Document 750/4016 10 Post HTRB Elect 750/4011 750/4021 11 Post HTRB Elect deltas 12 PDA 13 Power Burn-In 750/4016 750/4011 14 (TA=+ 25C Unless Otherwise Specified) IR <xμA dc, VR = xxx Vdc VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA Delta IR = ± yyy nAdc or 100% of pre HTRB reading, whichever is greater. Delta VF± xxx Vdc of pre HTRB reading The total number of devices failing < 5% 750/1038 750/4016 Post Burn-in Elect Conditions and/or Description of Operation 750/4011 Condition B, Operated for 240 hours min. Ta = 55C max, Vr = RATED Vdc, Io = RATED IR <xμA dc, VR = xxx Vdc VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) 750/4021 VBR ≥xxx V dc, Ibv=yyy μA 750/4016 Delta IR = ± yyy nAdc or 100% of pre Burn-In reading, whichever is greater. Delta VF± xxx Vdc of pre Burn-In reading 15 Post Burn-in Elect deltas 16 PDA The total number of devices failing < 5% 17 Combined PDA < 10% 750/4011 Page 3 Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM -6- HR500S (Axial Lead Package) HR500S (Axial Lead Package) 100% SCREENING, continued Test Operation MIL STD Reference Document 18 Scope Display 750/4023 19 Hot Solder Dip 20 Hermetic Seal 21 Body coat/band/label 22 Visual & Mechanical Electricals (TA =+ 25C Unless Otherwise Specified) BV > xxx V, trace to be as specified Serialization not maintained 750/2068 Use 2068 for opaque glass body 750/1071 Use 2071 for clear glass body 750/2071 The devices shall be examined for; Workmanship Materials, Design and Construction. 750/4016 23 Conditions and/or Description of Operation 750/4011 IR <xμA dc, VR = xxx Vdc VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) 750/4021 VBR ≥xxx V dc, Ibv=yyy μA 750/4023 BV > xxx V, trace to be as specified Optional X-Ray 750/2076 2 Views, Maintain Identity Optional IR Hot 750/4016 Optional TRR 750/4031 Optional CAP 750/4001 18 Scope Display 24 Pack W W W .SE MTE C H .C OM Page 4 -7- HR500S (Axial Lead Package) HR500S (Axial Lead Package) GROUP “A” same as Mil-PRF-19500 Sub Group 1 (15/0) 2 (116/0) Operation Visual & Mechanical Electrical (Static) R&R MIL STD Reference Document Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) 750/2071 The devices shall be examined for: Workmanship, Materials Design, and Construction 750/4016 IR 750/4011 VF 750/4021 VBR 750/3101 ZθJX TA= +/- zzzC 3 (116/0) 750/4016 IR 750/4011 VF 750/4021 VBR 750/3101 ZθJX Scope 750/4023 BV Trr 750/4031 Trr Capacitance 750/4001 Capacitance Forward Recovery Voltage 750/4026 Vfr 750/4026 tfr Electrical (Static) R&R Electrical (Dynamic) R&R 4 (116/0) Forward Recovery Time 5 6 (22/0) N/A Surge Current 750/4066 Page 5 Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM -8- HR500S (Axial Lead Package) HR500S (Axial Lead Package) GROUP “B” same as Mil-PRF-19500 Sub Group 1 (22/0) 2 (15/0) Operation Physical DIM MIL STD Reference Document 750/2066 Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) Per Device Outline Steam Aging Required, Solder Temp = +245+ 5 C Flux = Type ”R”, Dwell = 5 Seconds + ½ second. Visual Magnification = 10X > 95% Coverage Solderability 750/2026 Resistance to Solvents 750/1022 All areas of the diode body where marking has applied shall be brushed. Mark to remained legible at < 3X magnification 750/1056 Test condition A, 25 cycles, dwell > 2 minutes 0 C, +2 C, -10 C / 100 C + 10 C, -2 C Alcohol + DI Water / Boiling D.I. Water Transfer time 10< seconds Thermal Shock Temp Cycling 750/1051 Condition C, Temp. extremes : TA(low) = -55ºC+0, -10ºC TA (high) = 175ºC Time: Extreme = 15 minutes (min) Number of cycles = 100 3 (22/0) Surge Current 750/4066 Hermetic Seal 750/2068 Use 2068 for opaque glass body (gross leak) Electrical DE-CAP Internal Visual (6 Devices) 750/4016 IR 750/4011 VF 750/4021 VBR 750/2075 Design Verification Page 6 Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM -9- HR500S (Axial (Axial Lead Package) HR500S Lead Package) GROUP “B”, continued Sub Group Operation Pre Electrical Intermittent Op Life 4 (22/0) Electrical Deltas Pre Electrical Operation Life 5 (22/0) Electrical Deltas MIL STD Reference Document Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) 750/4016 IR 750/4011 VF 750/1037 2000 cycles condition D 750/4016 IR 750/4011 VF 750/4021 VBR 750/4016 750/4011 Delta IR = ± yyy nAdc or 100% of pre Burn-In reading, whichever is greater. Delta VF± xxx Vdc of pre Burn-In reading 750/4016 IR 750/4011 VF 750/1027 Bias as specified. Tj = 175ºC T=1000hrs min. Post test per A2 750/4016 IR 750/4011 VF 750/4021 VBR 750/3101 ZθJX 750/4016 Delta IR = ± yyy nAdc or 100% of pre Burn-In reading, whichever is greater. Delta VF± xxx Vdc of pre Burn-In reading 750/4011 Page 7 Semtech Corporation 200 Flynn Road Camarillo, CA 93012 Phone: 805-498-2111 Web: www.semtech.com W W W .SE MTE C H .C OM - 10 - HR500S (Axial Lead Package) HR500S (Axial Lead Package) GROUP “B”, continued 6 (22/0) Thermal Resistance Pre Electrical High-temperature Life 7 (32/0) Electrical RθJL 750/4016 IR 750/4011 VF 750/1032 340 hours minimum TA = TSTG(max) 750/4016 IR 750/4011 VF 750/4021 VBR 750/4016 Deltas 750/4011 Delta IR = ± yyy nAdc or 100% of pre Burn-In reading, whichever is greater. Delta VF± xxx Vdc of pre Burn-In reading PRP 750/4065 Prsm 750/4016 IR 750/4011 VF 750/4021 VBR 8 (10/0) 750/4081 Electrical Page 8 Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM - 11 - HR500S (Surface Mount Package) HR500S (Surface Mount Package) The platform device for this flow would be of JANTXV quality level Test Operation MIL STD Reference Document 1 Fab Traceability 2 Internal Visual 750/2074 3 Visual & Mechanical 750/2071 4 Electrical Sort 5 Cathode Band 6 Lead Cut Off 7 End Tab Assembly and Reflow 8 Visual & Mechanical Lot form prior to assembly from a single wafer fabrication lot 10 Page 1 Electrical GNG Scope Display The devices shall be examined for: Workmanship Materials, Design and Construction Electrical sort to Semtech internal specifications 750/2071 750/4016 9 Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) 750/4011 The devices shall be examined for: Workmanship Materials, Design and Construction IR <xμA dc, VR = xxx Vdc VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc pulse as specified) 750/4021 VBR ≥xxx V dc, Ibv=yyy μA 750/4023 BV > xxxV, trace to be as specified Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM - 12 - HR500S (Surface Mount Package) HR500S (Surface Mount Package) 100% SCREENING Test Operation MIL STD Reference Document 1 High Temperature Storage 750/1031 TA = xxx ºC, Time = 24 Hours 750/1051 Condition C, Temp. extremes : TA(low) = -55ºC TA (high) = 175ºC 2 Thermal Cycling Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) Time: Extreme = 15min Number of cycles = 20 3 Thermal Impedance 4 Thermal Normalization 5 Hermetic Seal 6 Electrical GNG 750/3101 Thermal distribution determined and “flyers” removed 750/2068 Use 2068 for opaque glass body 750/1071 Use 1071 for clear glass body 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 750/4021 7 8 ZθJX = As determined by Group E analysis VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA Ir Normalization Ir distribution determined and “flyers” removed Serialize Maintain Individual Identity through HTRB and Burn-in. Maintaining serialization through packaging is an available option W W W .SE MTE C H .C OM - 13 - HR500S (Surface Mount Package) HR500S (Surface Mount Package) 100% SCREENING, continued Test 9 Operation Pre HTRB Elect MIL STD Reference Document 750/4016 750/4011 750/4021 10 11 High Temperature Reverse Bias Post HTRB Elect Post HTRB Elect Deltas 13 PDA (TA =+ 25C Unless Otherwise Specified) IR < Statistical limit VR = xxx Vdc VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = yy Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA 750/1038 Condition A, Operated for 48 Hours min. TA = 150ºC, VR = 80% of rated VR 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 750/4021 12 Conditions and/or Description of Operation 750/4016 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA Delta IR = ± yyy nAdc or 100% of pre HTRB reading, whichever is greater. Delta VF± xxx Vdc of pre HTRB reading The total number of devices failing < 5% W W W .SE MTE C H .C OM - 14 - HR500S (Surface Mount Package) HR500S (Surface Mount Package) 100% SCREENING, continued Test 14 15 MIL STD Reference Document Conditions and/or Description of Operation Power Burn-in 750/1038 Condition B, Operated for 240 hours min. Post Burn-in Elect 750/4016 Operation Ta = 55C max, Vr = RATED Vdc, Io = RATED 750/4011 750/4021 16 Post Burn-in Elect deltas (TA =+ 25C Unless Otherwise Specified) 750/4016 750/4011 IR <xμA dc, VR = xxx Vdc VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA Delta IR = ± yyy nAdc or 100% of pre HTRB reading, whichever is greater. Delta VF± xxx Vdc of pre HTRB reading 17 PDA The total number of devices failing < 5% 18 Combined PDA < 10% 20 Scope Display 21 Pack 22 Optional X-Ray 750/2076 23 Optional IR Hot 750/4016 24 Optional TRR 750/4031 25 Optional CAP 750/4001 750/4023 BV > xxx V, trace to be as specified Maintain part identity from Burn-in (Optional) 2 Views, Maintain Identity IR< yyyμA dc, Vr = xxx Vdc, TA = +zzz C Trr < xxns, If = yA, Ir = yyA, Irec =yyyA C< xxpf, Vr = yyV, f=1Mhz W W W .SE MTE C H .C OM Page 4 - 15 - HR500S (Surface Mount Package) HR500S (Surface Mount Package) GROUP “A” same as Mil-PRF-19500 Sub Group 1 (15/0) 2 (116/0) Operation Visual & Mechanical Electrical (Static) R&R MIL STD Reference Document 750/2071 The devices shall be examined for; Workmanship, Materials Design, and Construction 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) 750/4021 VBR ≥xxx V dc, Ibv=yyy μA 750/3101 ZθJX = As determined by Group E analysis 750/4016 3 (116/0) Electrical (Static) R&R Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) 750/4011 750/4011 750/4021 Ta = +zzzºC IR < yyyμ Adc, VR = xxxVdc VF6, < xxx Vdc, If = yy Adc (pulse as specified) Ta = -zzzºC VF, < xxx Vdc, If = 1yy Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA Electrical (Dynamic) R&R 4 (116/0) Scope 750/4023 BV > xxx V, trace to be as specified Trr 750/4031 Capacitance 750/4001 < xx ns, If = yyA, Ir = yyA, Irec = yyyA dI/Dt=-yyA/μS min Forward Rrecovery Voltage 750/4026 Forward Recovery Time 5 6 (22/0) Page 5 750/4026 CAP < xxpf, Vr = xxV, f=1Mhz Vfr < xxV tr=ynS tfr N/A Surge = yyA, TA = 25ºC, VR = xxxVdc, Surge Current 750/4066 Io = yA, 10 Surges, 1 min between surges A2 electrical other than thermal impedance Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM - 16 - HR500S (Surface Mount Package) HR500S (Surface Mount Package) GROUP “B” same as Mil-PRF-19500 Sub Group 1 (22/0) 2 (15/0) Operation Physical DIM MIL STD Reference Document 750/2066 Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) Per Device Outline Steam Aging Required, Solder Temp = +245+ 5 C Flux = Type ”R”, Dwell = 5 Seconds + ½ second. Visual Magnification = 10X > 95% Coverage Solderability 750/2026 Resistance to Solvents 750/1022 All areas of the diode body where marking has applied shall be brushed. Mark to remained legible at < 3X magnification 750/1056 Test condition A, 25 cycles, dwell > 2 minutes 0 C, +2 C, -10 C / 100 C + 10 C, -2 C Alcohol + DI Water / Boiling D.I. Water Transfer time 10< seconds Thermal Shock Temp Cycling 750/1051 Condition C, Temp. extremes : TA(low) = -55ºC+0, -10ºC TA (high) = 175ºC Time: Extreme = 15 minutes (min) Number of cycles = 100 3 (22/0) Surge Current 750/4066 ISurge = yyA, TA = 25º C, VR = xxx Vdc Io = RATED, 10 Surges, 1 min between surges Hermetic Seal 750/2068 Use 2068 for opaque glass body (gross leak) 750/1071 Use 1071 for clear glass body 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) Electrical VF2, < xxx Vdc, If2 = y Adc (pulse as specified) DE-CAP Internal Visual (6 Devices) Page 6 750/4021 VBR ≥xxx V dc, Ibv=yyy μA 750/2075 Design Verification Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM - 17 - HR500S (Surface MountMount Package) HR500S (Surface Package) GROUP “B”, continued Sub Group Operation Pre Electrical Intermittent Op Life 4 (22/0) Electrical MIL STD Reference Document 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) 750/1037 2000 cycles condition D. 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) 750/4021 Deltas Pre Electrical Operation Life 5 (22/0) Electrical VBR ≥xxx V dc, Ibv=yyy μA 750/4011 Delta IR = ± yyy nAdc or 100% of pre HTRB reading, whichever is greater. Delta VF± xxx Vdc of pre HTRB reading 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) 750/1027 Bias as specified. Tj = 175ºC T=1000hrs min. Post test per A2 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) 750/4016 750/4021 750/3101 750/4016 Deltas Conditions and/or Description of Operation (TA =+ 25C Unless Otherwise Specified) 750/4011 VF2, < xxx Vdc, If2 = y Adc (pulse as specified) VBR ≥xxx V dc, Ibv=yyy μA ZθJX Delta IR = ± yyy nAdc or 100% of pre HTRB reading, whichever is greater. Delta VF± xxx Vdc of pre HTRB reading Page 7 Semtech Corporation 200 Flynn Road Camarillo, CA 93012 Phone: 805-498-2111 Web: www.semtech.com W W W .SE MTE C H .C OM - 18 - HR500S (Surface Mount Package) HR500S (Surface Mount Package) GROUP “B”, continued 6 (22/0) Thermal Resistance Pre Electrical High-temperature Life 7 (32/0) Electrical 750/4081 RθJEC < yyºC/W 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) 750/1032 340 hours minimum TA = TSTG(max) 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) VF2, < xxx Vdc, If2 = y Adc (pulse as specified) 750/4021 Deltas 750/4011 Delta IR = ± yyy nAdc or 100% of pre HTRB reading, whichever is greater. Delta VF± xxx Vdc of pre HTRB reading PRP 750/4065 Prsm 750/4016 IR <xμA dc, VR = xxx Vdc 750/4011 VF1, < xxx Vdc, If1 = y Adc (pulse as specified) 750/4016 8 (10/0) Electrical VF2, < xxx Vdc, If2 = y Adc (pulse as specified) 750/4021 Page 8 VBR ≥xxx V dc, Ibv=yyy μA VBR ≥xxx V dc, Ibv=yyy μA Semtech Corporation 200 Flynn Road Camarillo, CA 93012 W W W .SE MTE C H .C OM - 19 - Worldwide Locations Design & Application Center and Sales Office Sales/Support Offices North America Europe Asia Corporate Headquarters Camarillo, California 805 498 2111 Neuchatel, Switzerland Design Center & Applications + 41 32 729 4000 Seoul, Korea + 82 2 527 4377 San Diego, California Design Center & Applications 858 613 3320 St. Gallen, Switzerland + 41 71 313 4828 San Jose, California Design Center & Applications 408 324 3300 Redondo Beach, California Design Center & Applications 310 698 1000 Irvine, California Design Center & Applications 949 269 4400 Raleigh, North Carolina Design Center & Applications 919 465 6430 Southampton, England Design Center & Applications + 44 1794527 600 Courtaboeuf, France + 33 169 28 22 00 Hallbergmoos, Germany + 49 811 998 728 10 Tokyo, Japan + 81 3 6408 0950 Osaka, Japan + 81 6 6133 5608 Beijing, China + 86 10 6410 6855 Shanghai, China + 86 21 6391 0830 Shenzhen, China Design Center & Applications + 86 755 8282 8515 Taipei, Taiwan + 886 2 2748 3380 Manila, Philippines + 63 2772 1834 Ipoh, Malaysia + 60 5312 3333 Semtech and the Semtech logo are registered marks of Semtech Corporation. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. ©2010 Semtech Corporation. All rights reserved. W W W .SE MTE C H .C O M HR500S-PDA2010