TVS PROTECTION PRODUCT BRIEF Single-line ESD Low Capacitance Protection RClamp® 0531Z • 5V working voltage, 0.3 pF typ. cap. • ±15kV air discharge/ ±12kV contact RClamp® 0561Z • 5.5V working voltage, 0.12 pF typ. cap. • ±15kV air discharge/ ±12kV contact RClamp® 3321P • 3.3V working voltage, 0.35 pF typ. cap. • ±17kV air discharge/ ±12kV contact Safeguarding High-Speed UHD/3G(6G) - SDI Interfaces Highly reliable, low capacitance, low clamping voltage TVS for UHD/3G(6G)-SDI, USB3.1, HDMI2.0 and other high speed interfaces. RClamp® 3331ZA • 3.3V working voltage, 0.35 pF typ. cap. • ±18kV air discharge/ ±18kV contact ESD Strike RClamp® 3521P 300m RG59 • 3.5V working voltage, 0.4pF typ. cap. • ±17kV air discharge/ ±12kV contact RClamp® 5011ZA • 5.0V working voltage, 0.45pF typ. cap. • ±18kV air discharge/ ±15kV contact Part # 0.6mm Package (mm) RClamp 0531Z 0.6 x 0.3 x 0.25 RClamp® 0561Z 0.62 x 0.3 2 x 0.30 RClamp 3321P 1.0 x 0.6 x 0.5 RClamp® 3331ZA 0.6 x 0.3 x 0.25 RClamp 3521P 1.0 x 0.6 x 0.5 RClamp® 5011ZA 0.6 x 0.3 x 0.25 ® 0.3mm 1.0mm 0.6mm ® ® www.semtech.com 1 TVS PROTECTION PRODUCTS | PRODUCT BRIEF RClamp® 0531Z Absolute Maxmium Rating Maximum Rating Symbol Value Units Peak Pulse Power (tp = 8/20μs) Ppk 60 Watts Peak Pulse Current (tp = 8/20μs) Ipp 3 A ESD per IEC 61000-4-2 (Air)1 ESD per IEC 61000-4-2 (Contact)1 VESD +/- 15 +/- 12 kV Operating Temperature TJ -55 to +125 °C Storage Temperature TSTG -55 to +150 °C Electrical Characteristics (T=25°C unless otherwise specified) Parameter Symbol Condition Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM Pin 1 to 2 or 2 to 1 - - 5 V Reverse Breakdown Voltage VBR It = 1mA Pin 1 to 2 or 2 to 1 7 9 11 V Reverse Leakage Current IR VRWM = 5V, T=25°C Pin 1 to 2 or 2 to 1 - 5 20 µA VC IPP = 1A, tp = 8/20μs Pin 1 to 2 or 2 to 1 - - 15 V VC IPP = 3A, tp = 8/20μs Pin 1 to 2 or 2 to 1 - - 20 V VC IPP = 4A, tlp = 0.2/100ns - 13 - V VC IPP= 16A, tlp = 0.2/100ns - 21 - V Dynamic Resistance2, 3 RD tp = 100ns - 0.67 - Ohms Junction Capacitance Cj VR = 0V to 5V, f = 1MHz - 0.30 0.40 pF Junction Capacitance4 Cj VR = 0V to 5V, f = 1GHz - - 0.40 pF Change in Capacitance Over VR4 ΔC jVR VR = 0V, f = 1MHz - - 0.40 pF Clamping Voltage ESD Clamping Voltage2 Notes (1) ESD gun return path connected to ESD ground reference plane. (2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP averaging window: t1 = 70ns to t2 = 90ns. (3) Dynamic resistance calculated from ITLP = 4A to ITLP = 16A. (4) Guaranteed by design. Not production tested FEATURES • 5V working voltage • Single-line bidirectional protection • ±15kV air discharge/ ±12kV contact ORDERING INFORMATION RClamp0531Z.TNT Qty Per Reel Reel Size 10,000 7 inches • 0.3 pF typical capacitance • Package (0.6 x 0.3 x 0.25mm) 2 Semtech TVS Protection Products TVS PROTECTION PRODUCTS | PRODUCT BRIEF RClamp® 0561Z Absolute Maxmium Rating Maximum Rating Symbol Value Units Peak Pulse Power (tp = 8/20μs) Ppk 40 Watts Peak Pulse Current (tp = 8/20μs) Ipp 2 A ESD per IEC 61000-4-2 (Air)1 ESD per IEC 61000-4-2 (Contact)1 VESD +/- 15 +/- 12 kV Operating Temperature TJ -40 to +85 °C Storage Temperature TSTG -55 to +150 °C Electrical Characteristics (T=25°C unless otherwise specified) Parameter Symbol Condition Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM -40°C to 85°C - - 5.5 V Reverse Breakdown Voltage VBR It = 1mA -40°C to 85°C 6.5 9.5 10.5 V Reverse Leakage Current IR VRWM = 5.5V T = 25°C - 0.1 50 nA T = 85°C - 1 150 nA Clamping Voltage VC IPP = 2A, tp = 8/20μs - 16.5 20 V VC IPP = 4A, tp = 0.2/100ns (TLP) - 17 - V VC IPP = 16A, tp = 0.2/100ns (TLP) - 36 - V Dynamic Resistance2, 3 RDYN tp = 0.2/100ns (TLP) - 1.5 - Ohms Junction Capacitance Cj - 0.12 0.15 pF Cutoff Frequency Fc - 15 - GHz ESD Clamping Voltage2 VR = 0V, f = 1MHz T = 25°C -3dB Notes (1) Measured with a 40dB attenuator, 50 Ohm scope input impedance, 2GHz bandwidth. ESD gun return path connected to Ground Reference Plane (GRP) (2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP averaging window: t1 = 70ns to t2 = 90ns (3) Dynamic resistance calculated from ITLP = 4A to ITLP = 16A FEATURES • 5.5V working voltage • Single-line bidirectional protection • ±15kV air discharge/ ±12kV contact ORDERING INFORMATION RClamp0561Z.TFT Qty Per Reel Reel Size 15,000 7 inches • 0.12 pF typical capacitance • Package (0.62 x 0.32 x 0.3mm) 3 Semtech TVS Protection Products TVS PROTECTION PRODUCTS | PRODUCT BRIEF RClamp® 3321P Absolute Maxmium Rating Maximum Rating Symbol Value Units Peak Pulse Power (tp = 8/20μs) Ppk 25 Watts Peak Pulse Current (tp = 8/20μs) Ipp 3 A ESD per IEC 61000-4-2 (Air)1 ESD per IEC 61000-4-2 (Contact)1 VESD +/- 17 +/- 12 kV Operating Temperature TJ -55 to +125 °C Storage Temperature TSTG -55 to +150 °C Electrical Characteristics (T=25°C unless otherwise specified) Parameter Symbol Condition Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM -40°C to 85°C - - 3.3 V Reverse Breakdown Voltage VBR IBR = 1mA 5.5 7 8.5 V 50 nA Reverse Leakage Current IR VRWM = 3.3V 10 nA 13 V 10 - VC IPP = 1A, tp = 8/20μs VC IPP = 4A, tp = 8/20μs VC IPP = 4A, tp = 0.2/100ns - 8.8 - V VC IPP = 16A, tp = 0.2/100ns - 14.5 - V Trigger Voltage2 VTRIG tlp = 0.2/100ns Dynamic Resistance2, 3 RDYN tlp = 0.2/100ns - 0.47 - Ohms Junction Capacitance Cj VR = 0V, f = 1MHz - 0.22 0.35 pF Cutoff Frequency Fc -3dB - 15 - GHz Clamping Voltage ESD Clamping Voltage2 - 9.5 10.5 8 Notes (1) ESD gun return path connected to ESD ground reference plane. (2) TLP Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP sample window: t1 = 70ns to t2 = 90ns. (3) Dynamic resistance calculated from Ipp = 4A to Ipp = 16A using “Best Fit”. (4) Device is electrically symmetrical FEATURES • 3.3V working voltage • Single-line bidirectional protection • ±17kV air discharge/ ±12kV contact ORDERING INFORMATION RClamp3321P.TNT Qty Per Reel Reel Size 10,000 7 inches • 0.35 pF typical capacitance • Package (1.0 x 0.6 x 0.5mm) 4 Semtech TVS Protection Products TVS PROTECTION PRODUCTS | PRODUCT BRIEF RClamp® 3331ZA Absolute Maxmium Rating Maximum Rating Symbol Value Units Peak Pulse Power (tp = 8/20μs) Ppk 30 Watts Peak Pulse Current (tp = 8/20μs) Ipp 4 A ESD per IEC 61000-4-2 (Air)1 ESD per IEC 61000-4-2 (Contact)1 VESD +/- 18 +/- 18 kV Operating Temperature TJ -40 to +85 °C Storage Temperature TSTG -55 to +150 °C Electrical Characteristics (T=25°C unless otherwise specified) Parameter Symbol Condition Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM Pin 1 to 2 or 2 to 1 - - 3.3 V Reverse Breakdown Voltage VBR IBR = 10μA Pin 1 to 2 or 2 to 1 5.5 8 10.5 V Reverse Leakage Current IR VRWM = 3.3V, T=25°C Pin 1 to 2 or 2 to 1 - <1 50 VC IPP = 1A, tp = 8/20μs Pin 1 to 2 or 2 to 1 - 3.8 5.5 V VC IPP = 4A, tp = 8/20μs Pin 1 to 2 or 2 to 1 - 5.5 7.5 V VC IPP = 4A, tlp = 0.2/100ns - 4.5 - V VC IPP =16A, tlp = 0.2/100ns - 7 - V Dynamic Resistance2, 3 RDYN tp = 0.2/100ns - 0.20 - Ohms Junction Capacitance Cj VR = 0V, f = 1MHz - 0.22 0.35 pF Clamping Voltage ESD Clamping Voltage2 nA nA Notes (1) ESD gun return path connected to ESD ground reference plane. (2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP averaging window: t1 = 70ns to t2 = 90ns. (3) Dynamic resistance calculated from ITLP = 4A to ITLP = 16A FEATURES ORDERING INFORMATION • 3.3V working voltage • Single-line bidirectional protection • ±18kV air discharge/ ±18kV contact RClamp3331ZATFT Qty Per Reel Pocket Pitch Reel Size 15,000 2mm 7 inches • 0.35 pF typical capacitance • Package (0.6 x 0.3 x 0.25mm) 5 Semtech TVS Protection Products TVS PROTECTION PRODUCTS | PRODUCT BRIEF RClamp® 3521P Absolute Maxmium Rating Maximum Rating Symbol Value Units Peak Pulse Power (tp = 8/20μs) Ppk 50 Watts Peak Pulse Current (tp = 8/20μs) Ipp 4 A ESD per IEC 61000-4-2 (Air)1 ESD per IEC 61000-4-2 (Contact)1 VESD +/- 17 +/- 12 kV Operating Temperature TJ -40 to +125 °C Storage Temperature TSTG -55 to +150 °C Electrical Characteristics (T=25°C unless otherwise specified) Parameter Symbol Condition Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM - - - 3.5 V Reverse Breakdown Voltage VBR IBR = 1mA 4.5 6.7 8.5 V Reverse Leakage Current IR VRWM = 3.5V - 0.01 0.05 VC IPP = 1A, tp = 8/20μs - 9.5 10 V VC IPP = 4A, tp = 8/20μs - 10.5 13 V VC IPP = 4A, tlp = 0.2/100ns - 8.8 - V VC IPP =16A, tlp = 0.2/100ns - 14.5 - V Trigger Voltage2 VTRIG tlp = 0.2/100ns - 8 - Dynamic Resistance2, 3 RDYN tp = 0.2/100ns - 0.47 - Ohms Junction Capacitance Cj VR = 0V, f = 1MHz - 0.33 0.40 pF nA nA Clamping Voltage ESD Clamping Voltage2 Note (1) ESD gun return path connected to ESD ground reference plane. (2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP averaging window: t1 = 70ns to t2 = 90ns. (3) Dynamic resistance calculated from Ipp = 4A to Ipp = 16A. (4) Device is electrically symmetrical FEATURES • 3.5V working voltage • Single-line bidirectional protection • ±17kV air discharge/ ±12kV contact ORDERING INFORMATION RClamp3521P.TNT Qty Per Reel Reel Size 10,000 7 inches • 0.4 pF typical capacitance • Package (1.0 x 0.6 x 0.5mm) 6 Semtech TVS Protection Products TVS PROTECTION PRODUCTS | PRODUCT BRIEF RClamp® 5011ZA Absolute Maxmium Rating Maximum Rating Symbol Value Units Peak Pulse Power (tp = 8/20μs) Ppk 50 Watts Peak Pulse Current (tp = 8/20μs) Ipp 4 A ESD per IEC 61000-4-2 (Air)1 ESD per IEC 61000-4-2 (Contact)1 VESD +/- 18 +/- 15 kV Operating Temperature TJ -40 to +85 °C Storage Temperature TSTG -55 to +150 °C Electrical Characteristics (T=25°C unless otherwise specified) Parameter Symbol Condition Min. Typ. Max. Units Reverse Stand-Off Voltage VRWM -40°C to 85°C - - 5 V Reverse Breakdown Voltage VBR IBR = 1mA 6.5 7.5 10 V Reverse Leakage Current IR VRWM = 5V - <5 50 nA VC IPP = 2A, tp = 8/20μs - - 11.5 V VC IPP = 4A, tp = 8/20μs - - 12.5 V VC IPP = 4A, tp = 0.2/100ns - 8.5 - V VC IPP =16A, tp = 0.2/100ns - 11.5 - V Dynamic Resistance2, 3 RDYN tp = 0.2/100ns - 0.25 - Ohms Junction Capacitance Cj VR = 0V, f = 1MHz - 0.40 0.45 pF Clamping Voltage ESD Clamping Voltage2 Notes 1) Measured with a 40dB attenuator, 50 Ohm scope input impedance, 2GHz bandwidth. ESD gun return path connected to ESD ground plane. 2) Transmission Line Pulse Test (TLP) Settings: tp = 100ns, tr = 0.2ns, ITLP and VTLP averaging window: t1 = 70ns to t2 = 90ns. 3) Dynamic resistance calculated from ITLP = 4A to ITLP = 16A FEATURES • 5.0V working voltage • Single-line bidirectional protection • ±18kV air discharge/ ±15kV contact ORDERING INFORMATION RClamp5011ZATFT Qty Per Reel Reel Size 15,000 7 inches • 0.45pF typical capacitance • Package (0.6 x 0.3 x 0.25mm) 7 Semtech TVS Protection Products CUSTOMER CONTACT & KEY SALES OFFICES CORPORATE HEADQUARTERS Camarillo, California 805-498-2111 NORTH AMERICA San Jose, California 408-324-3300 Plano, Texas 972-231-1606 Burlington, Ontario 905-632-2996 EUROPE ASIA Rapperswil, Switzerland + 41-71-313-4828 Seoul, Korea + 82-2-527-4377 Taipei, Taiwan + 886-2-2748-3380 Bristol, England + 44-1454-462200 Tokyo, Japan + 81-3-5719-7560 Manila, Philippines + 63-2-772-1834 Courtaboeuf , France + 33-169-282200 Osaka, Japan + 81-6-6347-6570 Ipoh, Malaysia + 605-501-4800 Beijing, China +86-10-6410-6855 Penang, Malaysia + 604-643-1297 Hallbergmoos, Germany + 49-811-998-728-0 Shanghai, China + 86-21-6391-0830 Shenzhen, China Design Center & Applications + 86-755-8282-8515 For a detailed list of sales representatives for your area please visit www.semtech.com/contact Bhubaneswar, India + 91-674-398-1400 www.semtech.com/applications visit www.semtech.com for more 200 Flynn Road, Camarillo, California 93012 • phone: (805) 498-2111 • fax: (805) 498-3804 Semtech and the Semtech logo are registered marks of Semtech Corporation. All other trademarks and trade names mentioned may be marks and names of their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose. ©2015 Semtech Corporation. All rights reserved. RC-HDSDI-PB15v2