V I S H AY I N T E R T E C H N O L O G Y, I N C . AND TEC I INNOVAT O L OGY L-Series N HN Thin Film Chip Resistor O 19 62-2012 Resistors - Long Termination, Low Value Low Value (0.03 Ω to 10 Ω) Surface-Mount Thin Film Chip Resistor (Long Terminals) KEY BENEFITS • • • • • Small physical size down to 0505 High power handling capability (2 W maximum power rating) Approximately 2x improvement in power rating due to wide terminals Homogeneous nickel alloy moisture resistant film Attachment options: tin/lead, lead (Pb)-free-soldered- , gold terminations, or epoxy bondable terminations available • Sulfur resistant (per ASTM B809-95 humid vapor test) • Ohmic range from 0.03 Ω to 10 Ω APPLICATIONS • Battery life indicators, over-current protection and supervising circuits, current and voltage regulators, linear switch-mode power supplies, medical diagnostic equipment, motor speed controls, and overload protection devices RESOURCES • Datasheet: L- Series - www.vishay.com/doc?60027 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0326-1207 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . www.vishay.com AND TEC I INNOVAT L-NS 19 O L OGY L-Series N HN Thin Film Chip Resistor O 62-2012 Vishay Dale Thin Film Low Value Low (0.03Value Ω to (0.03 10 Ω)Surface-Mount to 10 ) ThinThin FilmFilm Chip Resistor (LongMount Terminals) Resistor, Surface Chip Actual Size 0805 With extremely low resistances and high power capabilities, Vishay’s proven and unique ultra-low value resistors can be used in your hybrid or surface-mount applications. These resistors are available with solderable or weldable terminations. Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. TYPICAL PERFORMANCE ABSOLUTE CONSTRUCTION Passivation Resistor Film TCR 300 TOL. 1.0 VALUE AND MINIMUM TOLERANCE Solder Coating Nickel Barrier High Purity Alumina Adhesion Layer VALUE () 0.1 0.25 0.5 1.0 2.0 10.0 < 0.1 MINIMUM TOLERANCE ± 2.0 % ± 1.0 % ± 1.0 % ± 1.0 % ± 1.0 % ± 1.0 % 20 % STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Nickel alloy 0.03 to 10 ± 300 ppm/°C 1 % to 20 % (value dependent) P x R - 55 °C to + 125 °C - 55 °C to + 150 °C < - 35 dB (typical) - CONDITIONS - 55 °C to + 125 °C - COMPONENT RATINGS Revision 27-Jul-12 Resistors - Long Termination, Low Value FEATURES • Homogeneous nickel alloy film • No inductance for high-frequency applications • Alumina substrates for high power handling capability (2 W maximum power rating) • Pre-soldered or gold terminations • Epoxy bondable termination available • Sulfur resistant (per ASTM B809-95 humid vapor test) • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 CASE SIZE (1) POWER RATING (mW) 0505 125 0508 400 0603 125 0612 500 0705/0805 200 1005 250 1020 1000 1206 330 1225 2000 1505 500 2010 1000 2512 2000 Notes • Resistor values beyond ranges shall be reviewed by the factory (1) 0705 and 0805 are the same (only use 0805 when ordering) RESISTANCE RANGE () 0.05 to 5.0 0.03 to 2.0 0.10 to 5.0 0.05 to 2.5 0.10 to 6.0 0.15 to 10.0 0.03 to 3.0 0.10 to 10.0 0.03 to 2.6 0.25 to 10.0 0.17 to 10.0 0.18 to 10.0 Revision: 27-Jul-12 PRODUCT Document Number: 60027 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SHEET 2/2 SET FORTH AT www.vishay.com/doc?91000 VMN-PT0326-1207 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000