Design and specifications are subject to change without notice. P/N:3810-0084B Rev 0 03/18 USER INFORMATION: Mounting Screw CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Ø 85 Service Monitor Cable Operation Manual CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Guide Pattern L-Wrench HD50 Series SPECIFICATIONS: Explanation of two Symbols PRECAUTION: ! All the warnings and instructions of this manual should be followed. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use water damped cloth for cleaning. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not place anything on top of the unit that might spill or fall into it. Do not attempt to service this unit yourself as opening or removing covers may you to dangerous voltage or other hazards. Please refer all servicing to qualified service personnel. Keep enough space around the unit for ventilation. Slots and openings on the monitor should not be blocked. During flashes of lightning or cracks of thunder, or when the system is not used for a long time, unplug the system power supply to protect the unit from lightening or power surges. Weight 2 Drill four holes according to the guide pattern then insert anchors into the drilled holes. 12VDC Power Type Ceiling #1 Draw out power / video wires to the connecting places. 4 Fix the camera to a celling using four screws. Video (Yellow) Guide Pattern Video Output • The wire is polarized. • Use 12VDC power source. No. Function Terminal Color GND #1 Video Output #2 3 You must be fully aware of all the distinctive features and precautions related to this camera before installing it. CONNECTION: This manual explains the installation and operating method for the color dome camera. Before installation, make sure you are familiar with this product's special features and proper operating technique. Stick the guide pattern on the wall or ceiling. #2 Power Input Power - 12VDC (Red) Remark Yellow 1.0 Vp-p Red 12VDC(10V~15V), 0.15A / 1.8W(Max) Mounting Screw 7 Fix the dome cover on the base by L-Wrench. 2.36” (60 mm) Put the dome cover over the base. 2.87” (73 mm) 6 0.16” (4.1 mm) Dome Cover 4.65” (118.8 mm) 3.03” (77 mm) After fixing it, adjust its pan base and tilt base properly. mp le to ins READ AND KEEP THIS OPERATION MANUAL ta 90º Built-in 3-axis camera bracket makes it much easier to rotate in any direction. TROUBLESHOOTING: 3.35” (85 mm) L-Wrench 4- 0.18” (4.5 mm) 2.36” (60 mm) Tilt 360º Horizontal 360º Pan If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the problem, contact an authorized technician. The image does not appear on the screen. Check the power source for the monitor and camera and ensure that the voltage and polarity are properly connected and being supplied correctly. The image on the screen is dim. Check if the lens is stained. If dirty, clean the lens with a soft, clean cloth. Adjust the Back Focus of the lens again. The camera does not work properly, the surface of the camera case is hot, and a black line appears on the screen. Check if you have connected the camera to a proper power source and If there is no problem with the power, turn the unit off immediately and seek assistance from our Customer Service department. The screen blinks a lot. Check if the camera is pointed toward the sun or a fluorescent lamp. Adjust the angle or location of the camera if too much light is coming into the screen. Dome Base DIMENSIONS: 5 Si Need Help? Call 1.800.796.CCTV for sales, service and customer support. www.honeywellvideo.com INSTALLATION: 1 Operation Manual • 1/3” SONY Super HAD CCD • 530 TVL • Built-in Fixed Lens (f=3.8mm) • Min. Illumination : 0.3 Lux • Auto White Balance • AGC • Vandal-Resistant Dome Housing • Diameter of Bubble : 85mm • THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM. "WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE" NTSC : 525 Lines PAL : 625 Lines 2 : 1 Interlace 15.734kHz 15.625kHz 59.94Hz 50Hz 1/3 inch SONY Super HAD CCD 410K/380K 470K/440K More than 48dB 530 TV Lines 1.0 Vp-p (75 Ohms, composite) Fixed Lens (f=3.8mm) Manual Internal 0.3 Lux 1/60~10,000 Sec. 1/50~10,000 Sec. Auto Auto Power(Red or Green Jack), Video(Yellow Jack) 12VDC (10V~15V) , 0.15A / 1.8W (Max) 85mm Approx. 376g ll Signal System Scanning System Scanning Frequency (H) Scanning Frequency (V) Image Sensor Total/Effective Pixels No. S/N Ratio Resolution Video Output Level Lens Focus Sync. System Sensitivity Electronic Shutter White Balance AGC Input/Output Connector Power Consumption Dome Size (Ø) The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.