CTM www.vishay.com Vishay Electro-Films Thin Film M Center-Tap Chip Resistor Divider Network FEATURES • Wire bondable • Resistance range total: 200 k to 10 M • Center tap • Chip size: 0.040" x 0.040" • Case: 0404 Product may not be to scale • Resistor material: Tantalum nitride, self-passivating The CTM resistor chips extends the resistance range to 10M in a center tap configuration while keeping the die size relatively small. The CTMs are manufactured using Vishay Electro-Films (EFI) sophisticated thin film equipment and manufacturing technology. The CTMs are 100 % electrically tested and visually inspected to MIL-STD-883, method 2032 class H or K. • Moisture resistant APPLICATIONS Vishay EFI CTM tapped megohm resistor chips are designed for hybrid packages requiring high value, two resistor combinations. TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES PARAMETER VALUE ± 0.1, ± 0.2, ± 0.5 % ± 50, ± 100, 0, - 250, - 350 ppm/°C Standard Tolerances TCR UNIT 200K to 10M Total Resistance Range Tightest Standard Tolerance Available 0.2 % 0.1 % 0.5 % ± 50 ppm/°C ± 100 ppm/°C 0 to - 250 ppm/°C 0 to - 350 ppm/°C 200 kΩ 2 MΩ 1.0 MΩ 10 MΩ 5 MΩ STANDARD ELECTRICAL SPECIFICATIONS PARAMETER VALUE UNIT ±5 ppm/°C 1 ± 1 standard % - 12 typ. dB ± 0.5 max. R/R % TCR Tracking Between Resistors Ratio/Ratio, RA/RB: Tolerance Noise Moisture Resistance, MIL-STD-202, Method 106 ± 0.5 max. absolute Stability, 1000 h, + 125 °C, 10 mW ± 0.005 ratio Operating Temperature Range % - 55 to + 125 °C Thermal Shock, MIL-STD-202, Method 107, Test Condition F ± 0.25 max. R/R % High Temperature Exposure, + 150 °C, 100 h ± 0.5 max. R/R % Dielectric Voltage Breakdown Insulation Resistance 200 V 1012 min. Operating Voltage 100 max. V DC Power Rating at + 70 °C (derated to zero at + 175 °C) 0.02 max. W ± 0.25 max. R/R % 5 x Rated Power Short-Time Overload, + 25 °C, 5 s Revision: 04-Mar-13 1 Document Number: 61034 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CTM www.vishay.com Vishay Electro-Films DIMENSIONS in inches 0.040 0.0154 0.036 0.005 0.005 SCHEMATIC R T = RA + R B RA RB MECHANICAL SPECIFICATIONS PARAMETER VALUE Chip Size 0.040" x 0.040" ± 0.002" (1.02 mm x 1.02 mm ± 0.05 mm) Chip Thickness 0.010" ± 0.002" (0.254 mm ± 0.05 mm) Chip Substrate Material Oxidized silicon, 10 kÅ minimum SiO2 Resistor Material Tantalum nitride, self-passivating Bonding Pad Size 0.005" x 0.005" (0.127 mm x 0.127 mm) min. Number of Pads 3 Pad Material 10 kÅ minimum gold (Al optional) Backing None, lapped semiconductor silicon (Au optional) GLOBAL PART NUMBER INFORMATION Global Part Number: CTM50002KCKKGNHWS Global Part Number Description: CTM 500K 10 % RT 0.25 % ± 100 ppm/°C ± 10 ppm/°C Au None H WS C T MODEL CTM M RESISTANCE (R TOTAL) First 4 digits are significant figures of resistance Revision: 04-Mar-13 5 0 RESISTANCE MULTIPLIER CODE 2 = 100 3 = 1000 4 = 10 000 0 0 TOL. CODE (%) 2 RATIO TOL. (%) B = 0.1 C = 0.25 C = 0.25 D = 0.5 F = 1.0 D = 0.5 G = 2.0 F = 1.0 N = No G = 2.0 J = 5.0 K = 10.0 K TCR (ppm/°C) C = ± 50 K = ± 100 R= 0/- 250 P= 0/- 350 C TCR TRACK (ppm/°C) K K G TERMINATION J=±5 K = ± 10 N = No 2 G = Au A = Al N BACK METAL H W S VISUAL PACKAGING CLASS CODE G = Au H= N = None Class H K= Class K WS = Waffle pack 100 min., 1 mult Document Number: 61034 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000