PTN36043 USB Type-C SuperSpeed active switch Rev. 1 — 26 April 2016 Product short data sheet 1. General description PTN36043 is a very small, low power 2 differential channel 2 to 1 active multiplex/demultiplexer switch with integrated SuperSpeed USB3.1 Gen 1 (also known as USB3.0) redriver IC that can switch two differential signals to one of two locations. The active switch has optimized performance with minimized crosstalk, as required by the high-speed serial interface for type C connector. PTN36043 allows expansion of existing high-speed ports for very low power consumption. With integrated USB3.1 Gen 1 redriver, signal quality is enhanced by performing receive equalization on the deteriorated input signal followed by transmit de-emphasis maximizing system link performance. With its superior differential signal conditioning and enhancement capability, the device delivers significant flexibility and performance scaling for various systems with different PCB characteristics and cable channel conditions and still benefit from optimum power consumption. PTN36043 has built-in advanced power management capability that enables significant power savings under various different USB3.1 Gen 1 Low-power modes (U2/U3). It can detect link electrical conditions and can dynamically activate/de-activate internal circuitry and logic. The device performs these actions without host software intervention and conserves power. PTN36043 is powered from a 1.8 V supply and is available in a small DHX2QFN18 package (2.4 mm 2.0 mm 0.35 mm) with 0.4 mm pitch. 2. Features and benefits 2 bidirectional differential channel, 2 : 1 multiplex/demultiplexer switch, supports USB3.1 Gen 1 specification (SuperSpeed only) Compliant to SuperSpeed USB3.1 Gen 1 standard Pin out data flow matches USB Type-C connector pin assignments Two control pins for each channel to select optimized signal conditions Receive equalization on each channel to recover from InterSymbol Interference (ISI) and high-frequency losses, with provision to choose equalization gain settings per channel Transmit de-emphasis on each channel delivers pre-compensation suited to channel conditions Output swing adjustment Integrated termination resistors provide impedance matching on both transmit and receive sides Automatic receiver termination detection Low active power: 203 mW/113 mA (typical) for VDD = 1.8 V PTN36043 NXP Semiconductors USB Type-C SuperSpeed active switch Power-saving states: 1.35 mW/0.75 mA (typical) when in U2/U3 states 0.81 mW/0.45 mA (typical) when no connection detected Excellent differential and common return loss performance 14 dB differential and 15 dB common-mode return loss for 10 MHz to 1250 MHz Flow-through pinout to ease PCB layout and minimize crosstalk effects Power supply: VDD = 1.8 V (typical) Compliant with JESD 78 Class II latch up test standard Very thin DHX2QFN18 package: 2.4 mm x 2.0 mm x 0.35 mm, 0.4 mm pitch ESD protection exceeds 7000 V HBM per JDS-001-2012 and 1000 V CDM per JESD22-C101 Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA Operating temperature range: 40°C to +85°C 3. Applications USB3.1 Gen 1 application for type C connectors Smart Phones, Tablets/Mobile Devices Desktop/Notebook Computers Docking Stations USB3.1 Gen 1 Peripherals such as flat panel display, consumer/storage devices, printers or USB3.1 Gen 1 capable hubs/repeaters 4. Ordering information Table 1. Ordering information Type number PTN36043BX Topside marking Package 43 DHX2QFN18 plastic dual in-line compatible thermal enhanced extremely thin quad flat package; no leads; 18 terminals; body 2.4 mm 2.0 mm 0.35 mm Name Description Version SOT1442-1 4.1 Ordering options Table 2. Ordering options Type number Orderable part number Package Packing method PTN36043BX PTN36043BXY DHX2QFN18 REEL 13" Q1/T1 *STANDARD 10000 MARK SMD DP Tamb = 40 C to +85 C PTN36043BX PTN36043BXZ DHX2QFN18 REEL 7" Q1/T1 *STANDARD MARK SMALL PQ DP Tamb = 40 C to +85 C PTN36043 Product short data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 26 April 2016 Minimum order quantity 500 Temperature © NXP Semiconductors N.V. 2016. All rights reserved. 2 of 7 PTN36043 NXP Semiconductors USB Type-C SuperSpeed active switch 5. Block diagram VDD = 1.8 V PTN36043 line driver TX_CON_1+ TX_CON_1− RX TERMINATION DETECTION line driver equalizer TX_AP_+ TX_AP_− TX_CON_2+ TX_CON_2− EMPHASIS FILTER SIGNAL DETECTION line driver RX_AP_+ RX_AP_− equalizer RX_CON_1+ RX_CON_1− EMPHASIS FILTER RX TERMINATION DETECTION SIGNAL DETECTION equalizer RX_CON_2+ RX_CON_2− DEVICE CONTROL AND MANAGEMENT SEL Fig 1. PTN36043 Product short data sheet CH1_SET1 CH1_SET2 CH2_SET1 CH2_SET2 aaa-017471 Block diagram of PTN36043 All information provided in this document is subject to legal disclaimers. Rev. 1 — 26 April 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 3 of 7 PTN36043 NXP Semiconductors USB Type-C SuperSpeed active switch 6. Revision history Table 3. Revision history Document ID Release date Data sheet status Change notice Supersedes PTN36043_SDS v.1 20160426 Product short data sheet - - PTN36043 Product short data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 26 April 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 4 of 7 PTN36043 NXP Semiconductors USB Type-C SuperSpeed active switch 7. Legal information 7.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 7.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 7.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. PTN36043 Product short data sheet Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 1 — 26 April 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 5 of 7 PTN36043 NXP Semiconductors USB Type-C SuperSpeed active switch Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 7.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 8. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] PTN36043 Product short data sheet All information provided in this document is subject to legal disclaimers. Rev. 1 — 26 April 2016 © NXP Semiconductors N.V. 2016. All rights reserved. 6 of 7 PTN36043 NXP Semiconductors USB Type-C SuperSpeed active switch 9. Contents 1 2 3 4 4.1 5 6 7 7.1 7.2 7.3 7.4 8 9 General description . . . . . . . . . . . . . . . . . . . . . . Features and benefits . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Ordering options . . . . . . . . . . . . . . . . . . . . . . . . Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Legal information. . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information. . . . . . . . . . . . . . . . . . . . . . Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 2 2 2 3 4 5 5 5 5 6 6 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP Semiconductors N.V. 2016. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 26 April 2016 Document identifier: PTN36043