MRCN Vishay Techno Thick Film Resistor/Capacitor Networks, Single-In-Line, Molded SIP FEATURES Isolated and ECL terminator schematics available Custom schematics available NP0 or X7R capacitors for line terminator Wide operating temperature range (- 55 °C to 125 °C) Molded epoxy case Solder coated copper terminals Solderability per MIL-STD-202 method 208E Marking resistance to solvents per MIL-STD-202 method 215 Compliant to RoHS Directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS RESISTOR CHARACTERISTICS CAPACITOR CHARACTERISTICS MODEL SCHEMATIC POWER RESISTANCE RESISTANCE CAPACITANCE CAPACITANCE TEMP. TOLERANCE (3) RANGE TOLERANCE (1) COEFF. TYPE (2) CAPACITANCE VOLTAGE RATING RANGE ± ppm/°C VDC ±% ±% P70 °C W 10 MRCN 0.20 20 50 to 1K 0.20 30 1, 2, 5 50 to 1K 0.20 1, 2, 5 50 to 1K NP0 33 pF to 3900 pF 10, 20 X7R 470 pF to 0.1 µF 10, 20 NP0 33 pF to 3900 pF 10, 20 X7R 470 pF to 0.1 µF 10, 20 NP0 33 pF to 3900 pF 10, 20 X7R 470 pF to 0.1 µF 10, 20 150 50 150 1, 2, 5 50 150 50 Notes (1) 2 % standard, ± 1 % and 5 % available (2) NP0 Capacitors may be substituted for X7R capacitors (3) Tighter tolerances available on request GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MRCN081N101J560KTB (preferred part number format) M R C GLOBAL MODEL PIN COUNT MRCN 08 = 8 pin 10 = 10 pin N 0 8 1 SCHEMATIC CHARACTERISTIC 1 = 10 2 = 20 3 = 30 N = NP0 X = X7R N 1 RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 101 = 100 220 = 22 102 = 1 k 0 1 J 5 RESISTANCE CAPACITANCE TOLERANCE VALUE F=1% G=2% J=5% 6 0 K T B CAPACITANCE TOLERANCE TERMINAL FINISH K = 10 % M = 20 % T= Sn90/Pb10 C = Sn95.5/ Ag3.9/ Cu0.6 (In picofarads) 2 digit significant figure, followed by a multiplier 101 = 100 pF 392 = 3000 pF 104 = 0.1 µF PACKAGING B = Bulk W = Tray Historical Part Numbering: MRCN0801101J560KS10 (will continue to be accepted) MRCN 08 01 101 J 560 K S10 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE RESISTANCE TOLERANCE CAPACITANCE VALUE CAPACITANCE TOLERANCE TERMINAL FINISH * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 68008 Revision: 09-Mar-11 For technical questions, contact: [email protected] www.vishay.com 19 MRCN Thick Film Resistor/Capacitor Networks, Single-In-Line, Molded SIP Vishay Techno SCHEMATICS SCHEMATIC 10 10K ECL TERMINATOR NETWORK R C R R R R SCHEMATIC 20 C R SCHEMATIC 30 100K ECL TERMINATOR NETWORK C C R R 1 2 3 4 5 6 7 8 1 2 3 C C R R R R R R R n-1 4 1 n 2 3 4 5 6 7 8 9 10 DIMENSIONS in inches (millimeters) 0.150 ± 0.010 (3.81 ± 0.254) #1 Pin A Pin #1 Identifier B 0.020 ± 0.002 (0.508 ± 0.051) (Seating Plane) 0.020 ± 0.002 (0.508 ± 0.051) 0.125 ± 0.015 (3.18 ± 0.381) C 0.100 ± 0.005 (2.54 ± 0.127) Non-Cumulative 0.010 ± 0.002 (0.254 ± 0.051) A ± 0.010 (0.254) B ± 0.010 (0.254) C ± 0.010 (0.254) 8 0.780 (19.81) 0.345 (8.76) 0.040 (1.02) 10 1.040 (26.42) 0.316 (8.03) 0.075 (1.91) NUMBER OF PINS Note • Custom schematics available www.vishay.com 20 For technical questions, contact: [email protected] Document Number: 68008 Revision: 09-Mar-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000