IL766B www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output, AC Input, Internal RBE FEATURES • Internal RBE for better stability • BVCEO ≥ 60 V A/C 1 6 NC C/A 2 5 C • AC or polarity insensitive inputs NC 3 4 E • No base connection • Isolation test voltage, 5300 VRMS • High insulation resistance, 1011 Ω typical i179040-1 • Standard plastic DIP package • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The IL766B is a bidirectional input, optically coupled isolator consisting of two gallium arsenide infrared emitters and a silicon photodarlington sensor. AGENCY APPROVALS • UL1577, File No. E52744 system code H or J, double protection • BSI IEC 60950; IEC 60065 ORDERING INFORMATION I L 7 6 PART NUMBER 6 B - # X CTR BIN 0 DIP-6 DIP-6, 400 mil, option 6 # PACKAGE OPTION AGENCY CERTIFIED/PACKAGE VDE, UL, BSI, CSA 0 DIP-6 DIP-6, 400 mil 7.62 mm 10.16 mm CTR (%) > 400 > 900 IL766B-1 IL766B-2 - IL766B-2X006 Note • For additional information on the available options refer to option information. ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Forward continuous current Power dissipation IF 60 mA Pdiss 200 mW 2.6 mW/°C Derate linearly from 55 °C OUTPUT Collector emitter breakdown voltage BVCEO 60 V Collector base breakdown voltage BVCBO 70 V Pdiss 200 mW 2.6 mW/°C VISO 5300 VRMS Ptot 250 mW mW/°C Power dissipation Derate linearly from 25 °C COUPLER UL isolation test voltage Total power dissipation t = 1.0 s Derate linearly from 25 °C 3.3 Creepage ≥7 min Clearance ≥7 min Rev. 1.5, 14-Aug-13 Document Number: 83644 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL766B www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT VIO = 500 V, Tamb = 25 °C RIO 1012 Ω VIO = 500 V, Tamb = 100 °C RIO 1011 Ω Storage temperature Tstg - 55 to + 150 °C Operating temperature Tamb - 55 to + 100 °C 10 s COUPLER Isolation resistance Lead soldering time at 260 °C Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 1.25 1.5 V INPUT Forward voltage IF = ± 10 mA VF Collector emitter breakdown voltage IC = 10 mA, IF = 0 A BVCEO Collector emitter leakage current VCE = 10 V, IF = 0 A ICEO IC = ± 10 mA, IF = ± 10 mA VCEsat OUTPUT 60 V 1.0 100 nA 1.0 V COUPLER Collector emitter, saturation voltage Note • Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER Saturation voltage, collector emitter TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IF = ± 1.0 mA, VCE = 5.0 V IL766B-1 CTR 400 % IF = ± 0.5 mA, VCE = 5.0 V IL766B-2 CTR 900 % MIN. SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL Turn-off time VCC = 5.0 V, IF = ± 2.0 mA, RL = 100 Ω toff Rev. 1.5, 14-Aug-13 TYP. 200 MAX. UNIT μs Document Number: 83644 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL766B www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 6.4 ± 0.1 ISO method A 8.6 ± 0.1 1 min. 7.62 typ. 1.2 ± 0.1 3.555 ± 0.255 18° 4° typ. 2.95 ± 0.5 0.8 min. 0.85 ± 0.05 3° to 9° 0.5 ± 0.05 0.25 typ. 7.62 to 8.81 i178004 2.54 typ. Option 6 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.255 (6.5) 0.248 (6.3) 20° 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) Rev. 1.5, 14-Aug-13 18446 Document Number: 83644 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000