VEMD10940FX01 Datasheet

VEMD10940FX01
www.vishay.com
Vishay Semiconductors
Silicon PIN Photodiode
FEATURES
• Package type: surface mount
• Package form: Side view
• Dimensions (L x W x H in mm): 3 x 2 x 1
• AEC-Q101 qualified
• High radiant sensitivity
• Daylight blocking filter matched with 830 nm
to 950 nm IR emitters
• Fast response times
• Angle of half sensitivity: ϕ = ± 75°
• Package matched
VSMB10940X01
DESCRIPTION
VEMD10940FX01 is a high speed and high sensitive PIN
photodiode in a miniature side looking, surface mount
package (SMD) with daylight blocking filter. Filter is matched
with IR emitters operating at wavelength of 830 nm to
950 nm. The photo sensitive area of the chip is 0.23 mm2.
with
IR
emitter
• Floor life: 168 h, MSL 3, according to J-STD-020
• Lead (Pb)-free reflow soldering
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• High speed photo detector
• Infrared remote control
• Infrared data transmission
• Photo interrupters
• IR touch panels
• Automotive applications
PRODUCT SUMMARY
COMPONENT
VEMD10940FX01
Ira (μA)
ϕ (deg)
λ0.5 (nm)
3
± 75
780 to 1050
Note
• Test conditions see table “Basic Characteristics”
ORDERING INFORMATION
ORDERING CODE
PACKAGING
REMARKS
PACKAGE FORM
VEMD10940FX01
Tape and reel
MOQ: 3000 pcs, 3000 pcs/reel
Side view
Note
• MOQ: minimum order quantity
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Reverse voltage
Power dissipation
Tamb ≤ 25 °C
Junction temperature
SYMBOL
VALUE
VR
60
UNIT
V
PV
104
mW
Tj
100
°C
Operating temperature range
Tamb
-40 to +100
°C
Storage temperature range
Tstg
-40 to +100
°C
According to reflow solder profile fig. 8
Tsd
260
°C
According to J-STD-051
RthJA
450
K/W
Soldering temperature
Thermal resistance junction / ambient
Rev. 1.1, 04-Dec-15
Document Number: 84217
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VEMD10940FX01
www.vishay.com
Vishay Semiconductors
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
IF = 50 mA
VF
-
1.56
-
V
IR = 100 μA, E = 0
V(BR)
32
-
-
V
VR = 10 V, E = 0
Iro
-
1
10
nA
VR = 0 V, f = 1 MHz, E = 0
CD
-
3.3
-
pF
VR = 3 V, f = 1 MHz, E = 0
CD
-
1.5
-
pF
Ee = 1 mW/cm2, λ = 950 nm
Vo
-
350
-
mV
Temperature coefficient of Vo
Ee = 1 mW/cm2, λ = 950 nm
TKVo
-
-2.7
-
mV/K
Short circuit current
Ee = 1 mW/cm2, λ = 950 nm
Ik
-
2.8
-
μA
Temperature coefficient of Ik
Ee = 1 mW/cm2, λ = 950 nm
TKIk
-
0.4
-
%/K
Ee = 1 mW/cm2, λ = 950 nm, VR = 5 V
Ira
2
3
4
μA
ϕ
-
± 75
-
deg
Forward voltage
Breakdown voltage
Reverse dark current
Diode capacitance
Open circuit voltage
Reverse light current
Angle of half sensitivity
Wavelength of peak sensitivity
Range of spectral bandwidth
λp
-
950
-
nm
λ0.5
-
780 to 1050
-
nm
Rise time
VR = 10 V, RL = 1 kΩ, λ = 820 nm
tr
-
100
-
ns
Fall time
VR = 10 V, RL = 1 kΩ, λ = 820 nm
tf
-
100
-
ns
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
100
Ira - Reverse Light Current (µA)
Iro - Reverse Dark Current (nA)
1000
100
10
VR = 10 V
1
20
94 8427
40
60
1
0.1
1
10
Ee - Irradiance (mW/cm2)
Tamb - Ambient Temperature (°C)
Fig. 1 - Reverse Dark Current vs. Ambient Temperature
Fig. 3 - Reverse Light Current vs. Irradiance
8
1.4
CD - Diode Capacitance (pF)
Ira, rel - Relative Reverse Light Current
10
0.1
0.01
100
80
VR = 5 V
λ = 950 nm
VR = 5 V
λ = 950 nm
1.2
1.0
0.8
6
E=0
f = 1 MHz
4
2
0
0.6
0
94 8416
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature
Rev. 1.1, 04-Dec-15
0.1
94 8430
1
10
100
VR- Reverse Voltage (V)
Fig. 4 - Diode Capacitance vs. Reverse Voltage
Document Number: 84217
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VEMD10940FX01
www.vishay.com
Vishay Semiconductors
0°
10°
20°
30°
Ie, rel - Relative Radiant Sensitivity
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
600
700
800
900
1000
40°
1.0
70°
80°
1100
0.7 0.6
Fig. 5 - Relative Spectral Sensitivity vs. Wavelength
10°
60°
0.8
λ - Wavelength (nm)
0°
50°
0.9
ϕ - Angular Displacement
S(λ)rel - Relative Spectral Sensitivity
1.0
0.4
0.2
0
Fig. 7 - Relative Radiant Sensitivity vs. Angular Displacement Vertical
20°
40°
1.0
50°
0.9
60°
0.8
70°
ϕ - Angular Displacement
Ie, rel - Relative Radiant Sensitivity
30°
80°
0.7 0.6
0.4
0.2
0
Fig. 6 - Relative Radiant Sensitivity vs. Angular DisplacementHorizontal
REFLOW SOLDER PROFILE
DRYPACK
Devices are packed in moisture barrier bags (MBB) to
prevent the products from moisture absorption during
transportation and storage. Each bag contains a desiccant.
FLOOR LIFE
Floor life (time between soldering and removing from MBB)
must not exceed the time indicated on MBB label:
Floor life: 168 h
Conditions: Tamb < 30 °C, RH < 60 %
Moisture sensitivity level 3, acc. to J-STD-020.
DRYING
Fig. 8 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D
Rev. 1.1, 04-Dec-15
In case of moisture absorption devices should be baked
before soldering. Conditions see J-STD-020 or label.
Devices taped on reel dry using recommended conditions
192 h at 40 °C (+5 °C), RH < 5 %.
Document Number: 84217
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VEMD10940FX01
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters: VEMD10940F
Recommended Solder Pad Footprint
22701
Rev. 1.1, 04-Dec-15
Document Number: 84217
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VEMD10940FX01
www.vishay.com
Vishay Semiconductors
TAPING AND REEL DIMENSIONS in millimeters: VEMD10940F
22667
22668
Rev. 1.1, 04-Dec-15
Document Number: 84217
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000