8 7 6 5 4 3 2 REV STAINLESS STEEL COMPATIBLE LASER WELDABLE MICRO-D CONNECTOR SRIMD104 DOCUMENT REVISIONS CHANGE NO. DATE APPROVED - INIT RLSE 7/14/2009 J. PETRI A DCN000609 1/22/2010 J. PETRI • TRADITIONAL CONFIGURATION WITH THE FLANGE LOCATED AT THE MIDSECTION OF THE CONNECTOR D • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D • CONFORMS TO MIL-DTL-83513 AND ARE AVAILABLE IN 9, 15, 21, 25, 31, 37, 51, AND 100 COUNT PIN/SOCKET CONFIGURATIONS. • INCORPORATES BERYLLIUM-COPPER PIN/SOCKETS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-PRF-83513/2. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. SHELL: STAINLESS STEEL ALLOY 304L, IN ACCORDANCE WITH AMS-QQ-S-763. INTERFACIAL SEAL: FLUOROSILICONE RUBBER PER MIL-R-25988, CLASS 1, TYPE II, GRADE 60. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100 / .000250 THICK. GOLD PLATE PER ASTM B488-01, TYPE III, CODE A, .000050 / .000100 THICK. PLATING IN SOCKETS NOT REQUIRED BENEATH BLEED HOLE. C 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND PIN CONFIGURATION: EXAMPLE: SRIMD104 - 25 - A 1 DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X BASE NUMBER B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, MICRO-D, STAINLESS STEEL LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 3:1 2 CAGE CODE SRIMD104 3PJY7 SHEET 1 REV A 1 OF 3 A 8 6 7 4 5 W .002 3 2 SRIMD104 DOCUMENT A .010 A .010 A .010 B .010 B .010 B .010 D D X .002 C .010 2XR C .010 9-37 PIN CONFIGURATIONS INTERFACIAL SEAL D .010 51 PIN CONFIGURATION 100 PIN CONFIGURATION 2X .010±.002 PIN EXTENSIONS (SEE SH 3) C C .320 .003 MAX BRK ALL AROUND .025±.002 .050 WELD FLANGE Y .001 INSULATOR (ONE PER CONTACT) CONTACT VIEW A B PIN END STYLE: A- STRAIGHT CUT B- STEPPED C- WIREBOND FLATS (SOLDERCUP SRIC101-1 AVAILABLE FOR WIRE ATTACH TO STRAIGHT CUT END CONFIGURATION) .015 ALL AROUND .020±.001 Z .001 B .003 MAX BRK 2XR HOLE DETAIL UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, MICRO-D, STAINLESS STEEL LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 3:1 2 CAGE CODE SRIMD104 3PJY7 SHEET 1 REV A 2 OF 3 A 8 7 6 STRAIGHT PIN END STYLE, A 5 4 3 STEPPED PIN END STYLE, B 2 SRIMD104 DOCUMENT WIREBOND FLAT PIN END STYLE, C PIN EXTENSION A, B, C, D PIN EXTENSION A, B, C, D PIN EXTENSION A, B, C, D D +.010 .025 FLAT - .000 .012 .001 E .018 .001 D .007 MIN THICK SR .018 MIN WIDE C C B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, MICRO-D, STAINLESS STEEL LASER WELDABLE SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 3:1 2 CAGE CODE SRIMD104 3PJY7 SHEET 1 REV A 3 OF 3 A